Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Crypt-Fernet-0.02 v5.18.2 OpenBSD
Date: 2014-08-20T21:04:15Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear WANLEUNG,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9152. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/thr/perl-5.18.2/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Crypt::CBC;'
# at t/Crypt-Fernet.t line 13.
# Tried to use 'Crypt::CBC'.
# Error: Can't locate Crypt/CBC.pm in @INC (you may need to install the Crypt::CBC module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch /home/cpan/pit/thr/perl-5.18.2/lib/site_perl/5.18.2/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.18.2/lib/site_perl/5.18.2 /home/cpan/pit/thr/perl-5.18.2/lib/5.18.2/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.18.2/lib/5.18.2 .) at t/Crypt-Fernet.t line 13.
# BEGIN failed--compilation aborted at t/Crypt-Fernet.t line 13.
# Failed test 'use MIME::Base64::URLSafe;'
# at t/Crypt-Fernet.t line 15.
# Tried to use 'MIME::Base64::URLSafe'.
# Error: Can't locate MIME/Base64/URLSafe.pm in @INC (you may need to install the MIME::Base64::URLSafe module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch /home/cpan/pit/thr/perl-5.18.2/lib/site_perl/5.18.2/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.18.2/lib/site_perl/5.18.2 /home/cpan/pit/thr/perl-5.18.2/lib/5.18.2/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.18.2/lib/5.18.2 .) at t/Crypt-Fernet.t line 15.
# BEGIN failed--compilation aborted at t/Crypt-Fernet.t line 15.
# Failed test 'use Crypt::Fernet;'
# at t/Crypt-Fernet.t line 16.
# Tried to use 'Crypt::Fernet'.
# Error: Can't locate Crypt/CBC.pm in @INC (you may need to install the Crypt::CBC module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch /home/cpan/pit/thr/perl-5.18.2/lib/site_perl/5.18.2/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.18.2/lib/site_perl/5.18.2 /home/cpan/pit/thr/perl-5.18.2/lib/5.18.2/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.18.2/lib/5.18.2 .) at /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib/Crypt/Fernet.pm line 41.
# BEGIN failed--compilation aborted at /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib/Crypt/Fernet.pm line 41.
# Compilation failed in require at t/Crypt-Fernet.t line 16.
# BEGIN failed--compilation aborted at t/Crypt-Fernet.t line 16.
Undefined subroutine &Crypt::Fernet::generate_key called at t/Crypt-Fernet.t line 19.
# Looks like you planned 12 tests but ran 4.
# Looks like you failed 3 tests of 4 run.
# Looks like your test exited with 255 just after 4.
t/Crypt-Fernet.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 11/12 subtests
Test Summary Report
-------------------
t/Crypt-Fernet.t (Wstat: 65280 Tests: 4 Failed: 3)
Failed tests: 1, 3-4
Non-zero exit status: 255
Parse errors: Bad plan. You planned 12 tests but ran 4.
Files=1, Tests=4, 1 wallclock secs ( 0.06 usr 0.02 sys + 0.06 cusr 0.03 csys = 0.17 CPU)
Result: FAIL
Failed 1/1 test programs. 3/4 subtests failed.
*** Error 255 in /home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02 (Makefile:827 'test_dynamic')
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Crypt::CBC
MIME::Base64::URLSafe
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'WANLEUNG (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Crypt::CBC' => '0', # or a minimum working version
'MIME::Base64::URLSafe' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.98 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9152
CPANPLUS::Dist::Build 0.78
Cwd 3.47
ExtUtils::CBuilder 0.280216
ExtUtils::Command 1.17
ExtUtils::Install 1.68
ExtUtils::MakeMaker 6.98
ExtUtils::Manifest 1.64
ExtUtils::ParseXS 3.24
File::Spec 3.47
Module::Build 0.4206
Pod::Parser 1.60
Pod::Simple 3.28
Test::Harness 3.32
Test::More 1.001003
version 0.9908
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 31837
PERL5_CPANPLUS_IS_VERSION = 0.9152
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.18.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.18.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 2) configuration:
Platform:
osname=openbsd, osvers=5.5, archname=OpenBSD.amd64-openbsd-thread-multi
uname='openbsd oedolyn.bingosnet.co.uk 5.5 generic#271 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.18.2 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.5'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.73.1, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY MYMALLOC PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under openbsd
Compiled at May 9 2014 06:16:14
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="31837"
PERL5_CPANPLUS_IS_VERSION="0.9152"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.18.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/lib
/home/cpan/pit/thr/conf/perl-5.18.2/.cpanplus/5.18.2/build/Crypt-Fernet-0.02/blib/arch
/home/cpan/pit/thr/perl-5.18.2/lib/site_perl/5.18.2/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.18.2/lib/site_perl/5.18.2
/home/cpan/pit/thr/perl-5.18.2/lib/5.18.2/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.18.2/lib/5.18.2
.