Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Expect-1.30 v5.8.9 GNU/Linux
Date: 2014-08-24T21:17:44Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SZABGAB,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9152. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/thr/perl-5.8.9/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Basic tests...
# Testing exec failure...
# Testing exp_continue...
# number of timeout calls in 5 sec: 4
# timeout shouldn't destroy accum contents
# Testing -notransfer...
# Testing raw reversing...
# isatty($exp): YES
# Called: 3
# Elapsed time: 6 delay by expect: 4.5
# Elapsed time: 6 delay by expect: 3.9
# Elapsed time: 6 delay by expect: 4.3
# Called: 3
# Check if the raw pty can handle large chunks of text at once
# ------------------------------------------------------------------------------
# The following tests check system-dependend behaviour, so even if some fail,
# Expect might still be perfectly usable for you!
# ------------------------------------------------------------------------------
# Length: 512
# Good, your raw pty can handle lines of at least 512 bytes at a time.
# Status: match
# Check if the default pty can handle large chunks of text at once
# ------------------------------------------------------------------------------
# The following tests check system-dependend behaviour, so even if some fail,
# Expect might still be perfectly usable for you!
# ------------------------------------------------------------------------------
# Length: 164
# Good, your default pty can handle lines of at least 164 bytes at a time.
# Status: match
# Testing controlling terminal...
# Checking if exit status is returned correctly...
# soft_close: 0x2A00
# Checking if signal exit status is returned correctly...
# soft_close: 0x8F00
#
# Checking if EOF on pty slave is correctly reported to master...
# (this fails on about 50% of the supported systems, so don't panic!
# Expect will work anyway!)
#
t/01-test.t ....... ok
# --------- bc version on linux
# bc 1.06.95
# Copyright 1991-1994, 1997, 1998, 2000, 2004, 2006 Free Software Foundation, Inc.
# ---------
# Failed test 'the number'
# at t/02-bc.t line 92.
# got: '2'
# expected: '30'
# Looks like you failed 1 test of 6.
# Failed test 'pty_bc'
# at t/02-bc.t line 97.
# Looks like you failed 1 test of 2.
t/02-bc.t .........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/2 subtests
# Test created for https://rt.cpan.org/Ticket/Display.html?id=62359 related to clear_accum
t/03-log.t ........ ok
t/04-multiline.t .. ok
t/10-internal.t ... ok
t/11-calc.t ....... ok
Test Summary Report
-------------------
t/02-bc.t (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 1
Files=6, Tests=93, 61 wallclock secs ( 0.06 usr 0.04 sys + 0.86 cusr 0.42 csys = 1.38 CPU)
Result: FAIL
Failed 1/6 test programs. 1/93 subtests failed.
make: *** [test_dynamic] Error 255
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.10 0
Exporter 5.63 0
ExtUtils::MakeMaker 6.98 0
Fcntl 1.06 0
File::Temp 0.2304 0
IO::Handle 1.27 0
IO::Pty 1.11 1.11
IO::Tty 1.11 1.11
POSIX 1.15 0
Test::Exception 0.32 0.32
Test::More 1.001003 1.00
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9152
CPANPLUS::Dist::Build 0.78
Cwd 3.47
ExtUtils::CBuilder 0.280216
ExtUtils::Command 1.16
ExtUtils::Install 1.68
ExtUtils::MakeMaker 6.98
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.24
File::Spec 3.47
Module::Build 0.4205
Pod::Parser 1.35
Pod::Simple 3.28
Test::Harness 3.32
Test::More 1.001003
version 0.9908
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/IO-Tty-1.11/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/IO-Tty-1.11/blib/arch:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Sub-Uplevel-0.24/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Sub-Uplevel-0.24/blib/arch:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Test-Exception-0.32/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Test-Exception-0.32/blib/arch:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Expect-1.30/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Expect-1.30/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 28328
PERL5_CPANPLUS_IS_VERSION = 0.9152
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.8.9/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=3.11.0-18-generic, archname=x86_64-linux-thread-multi
uname='linux undebwr 3.11.0-18-generic #32-ubuntu smp tue feb 18 21:11:14 utc 2014 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.8.9 -Dusethreads -Dcc=clang'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='clang', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible Debian Clang 3.2 (tags/RELEASE_32/final)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='clang', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
libc=libc-2.17.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.17'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
USE_64_BIT_ALL USE_64_BIT_INT USE_FAST_STDIO
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_REENTRANT_API
Built under linux
Compiled at Mar 26 2014 00:26:25
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/IO-Tty-1.11/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/IO-Tty-1.11/blib/arch:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Sub-Uplevel-0.24/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Sub-Uplevel-0.24/blib/arch:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Test-Exception-0.32/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Test-Exception-0.32/blib/arch:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Expect-1.30/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Expect-1.30/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="28328"
PERL5_CPANPLUS_IS_VERSION="0.9152"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/IO-Tty-1.11/blib/lib
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/IO-Tty-1.11/blib/arch
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Sub-Uplevel-0.24/blib/lib
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Sub-Uplevel-0.24/blib/arch
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Test-Exception-0.32/blib/lib
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Test-Exception-0.32/blib/arch
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Expect-1.30/blib/lib
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/Expect-1.30/blib/arch
/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9
/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9
.