Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Catalyst-Model-SOAP-1.5 v5.21.1 GNU/Linux
Date: 2014-05-31T10:59:21Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Daniel Ruoso,
This is a computer-generated report for Catalyst-Model-SOAP-1.5
on perl 5.21.1, created by CPAN-Reporter-1.2011.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /tmp/basesmoker-reloperl-M8Px/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Catalyst::Model::SOAP;'
# at t/01_basics.t line 6.
# Tried to use 'Catalyst::Model::SOAP'.
# Error: Can't locate XML/Compile/WSDL11.pm in @INC (you may need to install the XML::Compile::WSDL11 module) (@INC contains: /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1 .) at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# Compilation failed in require at t/01_basics.t line 6.
# BEGIN failed--compilation aborted at t/01_basics.t line 6.
Attempt to reload Catalyst/Model/SOAP.pm aborted.
Compilation failed in require at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 99.
...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 108.
BEGIN failed--compilation aborted at t/01_basics.t line 12.
# Looks like you planned 5 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 2 just after 1.
t/01_basics.t ................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 5/5 subtests
# Failed test 'use Catalyst::Model::SOAP;'
# at t/02_docliteral.t line 5.
# Tried to use 'Catalyst::Model::SOAP'.
# Error: Can't locate XML/Compile/WSDL11.pm in @INC (you may need to install the XML::Compile::WSDL11 module) (@INC contains: /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1 .) at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# Compilation failed in require at t/02_docliteral.t line 5.
# BEGIN failed--compilation aborted at t/02_docliteral.t line 5.
Attempt to reload Catalyst/Model/SOAP.pm aborted.
Compilation failed in require at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 99.
...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 108.
BEGIN failed--compilation aborted at t/02_docliteral.t line 15.
# Looks like you planned 3 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/02_docliteral.t ............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
# Failed test 'use Catalyst::Model::SOAP;'
# at t/03_docliteral_multipart.t line 5.
# Tried to use 'Catalyst::Model::SOAP'.
# Error: Can't locate XML/Compile/WSDL11.pm in @INC (you may need to install the XML::Compile::WSDL11 module) (@INC contains: /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1 .) at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# Compilation failed in require at t/03_docliteral_multipart.t line 5.
# BEGIN failed--compilation aborted at t/03_docliteral_multipart.t line 5.
Attempt to reload Catalyst/Model/SOAP.pm aborted.
Compilation failed in require at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 99.
...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 108.
BEGIN failed--compilation aborted at t/03_docliteral_multipart.t line 15.
# Looks like you planned 3 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/03_docliteral_multipart.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
# Failed test 'use Catalyst::Model::SOAP;'
# at t/04_rpcliteral.t line 5.
# Tried to use 'Catalyst::Model::SOAP'.
# Error: Can't locate XML/Compile/WSDL11.pm in @INC (you may need to install the XML::Compile::WSDL11 module) (@INC contains: /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1 .) at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# Compilation failed in require at t/04_rpcliteral.t line 5.
# BEGIN failed--compilation aborted at t/04_rpcliteral.t line 5.
Attempt to reload Catalyst/Model/SOAP.pm aborted.
Compilation failed in require at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 99.
...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 108.
BEGIN failed--compilation aborted at t/04_rpcliteral.t line 18.
# Looks like you planned 3 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/04_rpcliteral.t ............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
# Failed test 'use Catalyst::Model::SOAP;'
# at t/05_rpcliteral_oneway.t line 5.
# Tried to use 'Catalyst::Model::SOAP'.
# Error: Can't locate XML/Compile/WSDL11.pm in @INC (you may need to install the XML::Compile::WSDL11 module) (@INC contains: /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1 .) at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# Compilation failed in require at t/05_rpcliteral_oneway.t line 5.
# BEGIN failed--compilation aborted at t/05_rpcliteral_oneway.t line 5.
Attempt to reload Catalyst/Model/SOAP.pm aborted.
Compilation failed in require at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 99.
...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 108.
BEGIN failed--compilation aborted at t/05_rpcliteral_oneway.t line 15.
# Looks like you planned 3 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/05_rpcliteral_oneway.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
# Failed test 'use Catalyst::Model::SOAP;'
# at t/06_docliteral_oneway.t line 5.
# Tried to use 'Catalyst::Model::SOAP'.
# Error: Can't locate XML/Compile/WSDL11.pm in @INC (you may need to install the XML::Compile::WSDL11 module) (@INC contains: /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1 .) at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-7412-YOfG4D/Catalyst-Model-SOAP-1.5-ozOpFf/blib/lib/Catalyst/Model/SOAP.pm line 4.
# Compilation failed in require at t/06_docliteral_oneway.t line 5.
# BEGIN failed--compilation aborted at t/06_docliteral_oneway.t line 5.
Attempt to reload Catalyst/Model/SOAP.pm aborted.
Compilation failed in require at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 99.
...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/base.pm line 108.
BEGIN failed--compilation aborted at t/06_docliteral_oneway.t line 15.
# Looks like you planned 3 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/06_docliteral_oneway.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
Test Summary Report
-------------------
t/01_basics.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
Parse errors: Bad plan. You planned 5 tests but ran 1.
t/02_docliteral.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
t/03_docliteral_multipart.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
t/04_rpcliteral.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
t/05_rpcliteral_oneway.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
t/06_docliteral_oneway.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
Files=6, Tests=6, 1 wallclock secs ( 0.03 usr 0.00 sys + 0.68 cusr 0.06 csys = 0.77 CPU)
Result: FAIL
Failed 6/6 test programs. 6/6 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ------ -------
Catalyst::Runtime 5.7011 5.90064
Moose 0.9 2.1207
XML::Compile 1.06 1.44
XML::Compile::SOAP 2.14 3.05
XML::LibXML 1.7 2.0116
build_requires:
Module Need Have
------------------- ------ -------
ExtUtils::MakeMaker 0 6.98
configure_requires:
Module Need Have
------------------- ------ -------
ExtUtils::MakeMaker 0 6.98
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL = /tmp/basesmoker-reloperl-M8Px/bin/perl
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 11021
PERL5_CPAN_IS_RUNNING = 11021
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-M8Px/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.05
CPAN::Meta 2.141170
Cwd 3.48
ExtUtils::CBuilder 0.280216
ExtUtils::Command 1.18
ExtUtils::Install 1.67
ExtUtils::MakeMaker 6.98
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.24
File::Spec 3.48
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4205
Module::Signature 0.73
Parse::CPAN::Meta 1.4414
Test::Harness 3.30
Test::More 1.001003
YAML 0.92
YAML::Syck 1.27
version 0.9908
--
Summary of my perl5 (revision 5 version 21 subversion 1) configuration:
Commit id: 808cb9e98625e89abe4e21e243670aa46c12c5d3
Platform:
osname=linux, osvers=3.13-1-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux k83 3.13-1-amd64 #1 smp debian 3.13.7-1 (2014-03-25) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.8.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.8/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=libc-2.18.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.18'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
PERL_USE_DEVEL USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at May 31 2014 03:54:13
%ENV:
PERL="/tmp/basesmoker-reloperl-M8Px/bin/perl"
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="11021"
PERL5_CPAN_IS_RUNNING="11021"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/site_perl/5.21.1
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-177-g808cb9e/a2da/lib/5.21.1
.