Report for File-Mork-0.4

Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: PASS File-Mork-0.4 v5.10.1 SunOS/Solaris
Date: 2015-12-25T21:47:00Z

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear SIMONW,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.9156. Testers personal comments may appear
at the end of this report.


Thank you for uploading your work to CPAN.  Congratulations!
All tests were successful.

TEST RESULTS:

Below is the error stack from stage 'make test':

t/01use.t ..... ok
t/02simple.t .. ok
t/03error.t ... ok
All tests successful.
Files=3, Tests=22,  1 wallclock secs ( 0.02 usr  0.01 sys +  0.06 cusr  0.03 csys =  0.12 CPU)
Result: PASS


PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

	  Module Name                        Have     Want
	  HTML::Entities                     3.69        0
	  Test::More                     1.001014        0

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9156
	CPANPLUS::Dist::Build              0.78
	Cwd                                3.60
	ExtUtils::CBuilder             0.280224
	ExtUtils::Command                  7.10
	ExtUtils::Install                  2.04
	ExtUtils::MakeMaker                7.10
	ExtUtils::Manifest                 1.70
	ExtUtils::ParseXS                  3.30
	File::Spec                         3.60
	Module::Build                    0.4214
	Pod::Parser                        1.37
	Pod::Simple                        3.07
	Test::Harness                      3.35
	Test::More                     1.001014
	version                          0.9912

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:


This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.94.
Powered by minismokebox version 0.58

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_US.UTF-8
    LC_ALL = 
    LC_COLLATE = 
    LC_CTYPE = 
    LC_MESSAGES = 
    LC_MONETARY = 
    LC_NUMERIC = 
    LC_TIME = 
    NONINTERACTIVE_TESTING = 1
    PATH = /export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/cRrR7cu6JS/File-Mork-0.4/blib/script:/opt/solarisstudio12.3/bin:/opt/solarisstudio12.3/bin:/usr/bin:/usr/sbin
    PERL5LIB = :/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/hKgOczZCKL/HTML-Tagset-3.20/blib/lib:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/hKgOczZCKL/HTML-Tagset-3.20/blib/arch:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/3NmKvKt1x_/HTML-Parser-3.71/blib/lib:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/3NmKvKt1x_/HTML-Parser-3.71/blib/arch:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/cRrR7cu6JS/File-Mork-0.4/blib/lib:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/cRrR7cu6JS/File-Mork-0.4/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 3016
    PERL5_CPANPLUS_IS_VERSION = 0.9156
    PERL5_MINISMOKEBOX = 0.58
    PERL5_YACSMOKE_BASE = /export/home/cpan/pit/thr/conf/perl-5.10.1
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /export/home/cpan/pit/thr/perl-5.10.1/bin/perl
    UID:  $<  = 101
    EUID: $>  = 101
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
   
  Platform:
    osname=solaris, osvers=2.11, archname=i86pc-solaris-thread-multi-64
    uname='sunos soflyn 5.11 11.2 i86pc i386 i86pc '
    config_args='-des -Dprefix=/export/home/cpan/pit/thr/perl-5.10.1 -Dusethreads -Duse64bitall'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='/opt/solarisstudio12.3/bin/cc', ccflags ='-D_REENTRANT -m64 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV',
    optimize='-O',
    cppflags='-D_REENTRANT -m64'
    ccversion='Sun C 5.12 SunOS_i386 2011/11/16', gccversion='', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='/opt/solarisstudio12.3/bin/cc', ldflags =' -m64 -L/opt/solarisstudio12.3/prod/lib/amd64 -L/lib/64 -L/usr/gnu/lib '
    libpth=/opt/solarisstudio12.3/prod/lib/amd64 /lib/64 /usr/gnu/lib /usr/lib /usr/ccs/lib
    libs=-lsocket -lnsl -lgdbm -ldb -ldl -lm -lpthread -lc
    perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-KPIC', lddlflags=' -G -m64 -L/opt/solarisstudio12.3/prod/lib/amd64 -L/lib/64 -L/usr/gnu/lib'


Characteristics of this binary (from libperl): 
  Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
                        PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
                        PERL_USE_SAFE_PUTENV USE_64_BIT_ALL USE_64_BIT_INT
                        USE_ITHREADS USE_LARGE_FILES USE_PERLIO
                        USE_REENTRANT_API
  Locally applied patches:
	Devel::PatchPerl 1.34
  Built under solaris
  Compiled at Jun 16 2015 14:56:29
  %ENV:
    PERL5LIB=":/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/hKgOczZCKL/HTML-Tagset-3.20/blib/lib:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/hKgOczZCKL/HTML-Tagset-3.20/blib/arch:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/3NmKvKt1x_/HTML-Parser-3.71/blib/lib:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/3NmKvKt1x_/HTML-Parser-3.71/blib/arch:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/cRrR7cu6JS/File-Mork-0.4/blib/lib:/export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/cRrR7cu6JS/File-Mork-0.4/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="3016"
    PERL5_CPANPLUS_IS_VERSION="0.9156"
    PERL5_MINISMOKEBOX="0.58"
    PERL5_YACSMOKE_BASE="/export/home/cpan/pit/thr/conf/perl-5.10.1"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/hKgOczZCKL/HTML-Tagset-3.20/blib/lib
    /export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/hKgOczZCKL/HTML-Tagset-3.20/blib/arch
    /export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/3NmKvKt1x_/HTML-Parser-3.71/blib/lib
    /export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/3NmKvKt1x_/HTML-Parser-3.71/blib/arch
    /export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/cRrR7cu6JS/File-Mork-0.4/blib/lib
    /export/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/cRrR7cu6JS/File-Mork-0.4/blib/arch
    /export/home/cpan/pit/thr/perl-5.10.1/lib/5.10.1/i86pc-solaris-thread-multi-64
    /export/home/cpan/pit/thr/perl-5.10.1/lib/5.10.1
    /export/home/cpan/pit/thr/perl-5.10.1/lib/site_perl/5.10.1/i86pc-solaris-thread-multi-64
    /export/home/cpan/pit/thr/perl-5.10.1/lib/site_perl/5.10.1
    .