Inline-C v0.79_001 Perl 5 v5.10.0 i686-linux-thread-multi-64int
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Inline-C v0.79_001
- Platform
- Perl 5 v5.10.0 i686-linux-thread-multi-64int
- Date
- 2019-01-26 13:41:06
- ID
- 07ff903c-2170-11e9-98d5-bb14e5798fec
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TINITA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9176. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/home/cpan/pit/rel/perl-5.10.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t ................ ok
t/01syntax.t ........................... ok
t/02config.t ........................... ok
t/03typemap.t .......................... ok
t/04perlapi.t .......................... ok
t/05xsmode.t ........................... ok
t/06parseregexp.t ...................... ok
t/07typemap_multi.t .................... ok
t/08taint.t ............................ ok
This test could take a couple of minutes to run
t/09parser.t ........................... ok
t/10callback.t ......................... ok
t/11default_readonly.t ................. ok
t/14void_arg.t ......................... ok
Use of inherited AUTOLOAD for non-method main::foo1() is deprecated at (eval
46) line 1 (#1)
(D deprecated) As an (ahem) accidental feature, AUTOLOAD subroutines
are looked up as methods (using the @ISA hierarchy) even when the
subroutines to be autoloaded were called as plain functions (e.g.
Foo::bar()), not as methods (e.g. Foo->bar() or <
$obj-bar() >>).
This bug will be rectified in future by using method lookup only for
methods' AUTOLOADs. However, there is a significant base of existing
code that may be using the old behavior. So, as an interim step, Perl
currently issues an optional warning when non-methods use inherited
AUTOLOADs.
The simple rule is: Inheritance will not work when autoloading
non-methods. The simple fix for old code is: In any module that used
to depend on inheriting AUTOLOAD for non-methods from a base class
named BaseClass, execute *AUTOLOAD = \&BaseClass::AUTOLOAD during
startup.
In code that currently says use AutoLoader; @ISA = qw(AutoLoader);
you should remove AutoLoader from @ISA and change use AutoLoader; to
use AutoLoader 'AUTOLOAD';.
Use of inherited AUTOLOAD for non-method main::foo2() is deprecated at (eval
48) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo3() is deprecated at (eval
50) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo7() is deprecated at (eval
52) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo8() is deprecated at (eval
54) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo9() is deprecated at (eval
56) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo10() is deprecated at (eval
58) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo11() is deprecated at (eval
60) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo12() is deprecated at (eval
62) line 1 (#1)
t/14void_arg_PRD.t ..................... ok
t/15ccflags.t .......................... ok
t/16ccflagsex.t ........................ ok
t/17prehead.t .......................... ok
t/18quote_space.t ...................... ok
t/19INC.t .............................. ok
t/20eval.t ............................. ok
t/21read_DATA.t ........................ ok
t/22read_DATA_2.t ...................... ok
t/23validate.t ......................... ok
t/24prefix.t ........................... ok
t/25proto.t ............................ ok
t/26fork.t ............................. ok
t/27inline_maker.t ..................... ok
t/28autowrap.t ......................... ok
t/30cppflags.t ......................... ok
t/31include_dirs_angle_brackets.t ...... ok
t/32include_dirs_double_quotes_bad.t ... ok
t/33include_dirs_double_quotes_good.t .. ok
t/author-pod-syntax.t .................. skipped: these tests are for testing by the author
Warning: Use of "caller" without parentheses is ambiguous at t/TestInlineC.pm line 38.
t/parse-pegex.t ........................ ok
t/pegex-parser.t ....................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
All tests successful.
Test Summary Report
-------------------
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=35, Tests=157, 34 wallclock secs ( 0.10 usr 0.03 sys + 30.37 cusr 3.23 csys = 33.73 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.34 7.00
File::Copy::Recursive 0.44 0
File::Path 2.16 0
File::Spec 3.75 0.8
Inline 0.80 0.79
Parse::RecDescent 1.967015 1.967009
Pegex 0.70 0.58
Test::More 1.302141 0.88
Test::Warn 0.36 0.23
YAML::XS 0.76 0
autodie 2.29 0
version 0.9924 0.77
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9176
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.34
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.71
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4224
Pod::Parser 1.35
Pod::Simple 3.35
Test2 1.302141
Test::Harness 3.42
Test::More 1.302141
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.06.
Powered by minismokebox version 0.68
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/DqdpoEEtOL/lib/perl5:/home/cpan/pit/rel/conf/perl-5.10.0/.cpanplus/5.10.0/build/VD9zs2QJo0/Inline-C-0.79_001/blib/lib:/home/cpan/pit/rel/conf/perl-5.10.0/.cpanplus/5.10.0/build/VD9zs2QJo0/Inline-C-0.79_001/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 15267
PERL5_CPANPLUS_IS_VERSION = 0.9176
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/rel/conf/perl-5.10.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/DqdpoEEtOL
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/DqdpoEEtOL"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/DqdpoEEtOL
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/rel/perl-5.10.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=4.16.0-1-686, archname=i686-linux-thread-multi-64int
uname='linux dodo 4.16.0-1-686 #1 smp debian 4.16.5-1 (2018-04-29) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/rel/perl-5.10.0 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='7.3.0', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=libc-2.27.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.27'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.48
Built under linux
Compiled at May 14 2018 13:07:17
%ENV:
PERL5LIB="/home/cpan/pit/jail/DqdpoEEtOL/lib/perl5:/home/cpan/pit/rel/conf/perl-5.10.0/.cpanplus/5.10.0/build/VD9zs2QJo0/Inline-C-0.79_001/blib/lib:/home/cpan/pit/rel/conf/perl-5.10.0/.cpanplus/5.10.0/build/VD9zs2QJo0/Inline-C-0.79_001/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="15267"
PERL5_CPANPLUS_IS_VERSION="0.9176"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/rel/conf/perl-5.10.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/DqdpoEEtOL"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/DqdpoEEtOL""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/DqdpoEEtOL"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/DqdpoEEtOL/lib/perl5/5.10.0/i686-linux-thread-multi-64int
/home/cpan/pit/jail/DqdpoEEtOL/lib/perl5/5.10.0
/home/cpan/pit/jail/DqdpoEEtOL/lib/perl5/i686-linux-thread-multi-64int
/home/cpan/pit/jail/DqdpoEEtOL/lib/perl5
/home/cpan/pit/rel/conf/perl-5.10.0/.cpanplus/5.10.0/build/VD9zs2QJo0/Inline-C-0.79_001/blib/lib
/home/cpan/pit/rel/conf/perl-5.10.0/.cpanplus/5.10.0/build/VD9zs2QJo0/Inline-C-0.79_001/blib/arch
/home/cpan/pit/rel/perl-5.10.0/lib/5.10.0/i686-linux-thread-multi-64int
/home/cpan/pit/rel/perl-5.10.0/lib/5.10.0
/home/cpan/pit/rel/perl-5.10.0/lib/site_perl/5.10.0/i686-linux-thread-multi-64int
/home/cpan/pit/rel/perl-5.10.0/lib/site_perl/5.10.0
.