Starman v0.4017 Perl 5 v5.36.3 x86_64-linux-thread-multi-ld
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Starman v0.4017
- Platform
- Perl 5 v5.36.3 x86_64-linux-thread-multi-ld
- Date
- 2024-06-15 12:08:53
- ID
- 08b46066-2b10-11ef-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Tatsuhiko Miyagawa,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00_compile.t ........... ok
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
2024/06/15-13:07:49 Starman::Server (type Net::Server::PreFork) starting! pid(393341)
Binding to TCP port 38931 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:07:49 Server closing!
t/chunked_req.t .......... ok
t/chunked_termination.t .. ok
2024/06/15-13:07:49 Starman::Server (type Net::Server::PreFork) starting! pid(393349)
Binding to TCP port 46799 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:07:49 Server closing!
t/chunked_zero_length.t .. ok
2024/06/15-13:07:49 Starman::Server (type Net::Server::PreFork) starting! pid(393356)
Binding to TCP port 41173 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:07:49 Server closing!
t/early-hints.t .......... ok
2024/06/15-13:07:49 Starman::Server (type Net::Server::PreFork) starting! pid(393363)
Binding to TCP port 44879 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:07:51 Server closing!
Accept failed with 29 tries left: Invalid argument
Accept failed with 28 tries left: Invalid argument
Accept failed with 27 tries left: Invalid argument
Accept failed with 26 tries left: Invalid argument
Accept failed with 25 tries left: Invalid argument
Accept failed with 24 tries left: Invalid argument
Accept failed with 23 tries left: Invalid argument
Accept failed with 22 tries left: Invalid argument
Accept failed with 21 tries left: Invalid argument
Accept failed with 20 tries left: Invalid argument
Accept failed with 19 tries left: Invalid argument
Accept failed with 18 tries left: Invalid argument
Accept failed with 17 tries left: Invalid argument
Accept failed with 16 tries left: Invalid argument
Accept failed with 15 tries left: Invalid argument
Accept failed with 14 tries left: Invalid argument
Accept failed with 13 tries left: Invalid argument
Accept failed with 12 tries left: Invalid argument
Accept failed with 11 tries left: Invalid argument
Accept failed with 10 tries left: Invalid argument
Accept failed with 9 tries left: Invalid argument
Accept failed with 8 tries left: Invalid argument
Accept failed with 7 tries left: Invalid argument
Accept failed with 6 tries left: Invalid argument
Accept failed with 5 tries left: Invalid argument
Accept failed with 4 tries left: Invalid argument
Accept failed with 3 tries left: Invalid argument
Accept failed with 2 tries left: Invalid argument
Accept failed with 1 tries left: Invalid argument
Accept failed with 0 tries left: Invalid argument
Ran out of accept retries!
t/eintr.t ................ ok
2024/06/15-13:08:21 Starman::Server (type Net::Server::PreFork) starting! pid(393371)
Binding to TCP port 43645 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:08:21 Server closing!
t/expect.t ............... ok
2024/06/15-13:08:21 Starman::Server (type Net::Server::PreFork) starting! pid(393378)
Binding to TCP port 46533 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:08:21 Server closing!
2024/06/15-13:08:21 Starman::Server (type Net::Server::PreFork) starting! pid(393384)
Binding to TCP port 44211 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:08:21 Server closing!
Accept failed with 29 tries left: Invalid argument
Accept failed with 28 tries left: Invalid argument
Accept failed with 27 tries left: Invalid argument
Accept failed with 26 tries left: Invalid argument
Accept failed with 25 tries left: Invalid argument
Accept failed with 24 tries left: Invalid argument
Accept failed with 23 tries left: Invalid argument
Accept failed with 22 tries left: Invalid argument
Accept failed with 21 tries left: Invalid argument
Accept failed with 20 tries left: Invalid argument
Accept failed with 19 tries left: Invalid argument
Accept failed with 18 tries left: Invalid argument
Accept failed with 17 tries left: Invalid argument
Accept failed with 16 tries left: Invalid argument
Accept failed with 15 tries left: Invalid argument
Accept failed with 14 tries left: Invalid argument
Accept failed with 13 tries left: Invalid argument
Accept failed with 12 tries left: Invalid argument
Accept failed with 11 tries left: Invalid argument
Accept failed with 10 tries left: Invalid argument
Accept failed with 9 tries left: Invalid argument
Accept failed with 8 tries left: Invalid argument
Accept failed with 7 tries left: Invalid argument
Accept failed with 6 tries left: Invalid argument
Accept failed with 5 tries left: Invalid argument
Accept failed with 4 tries left: Invalid argument
Accept failed with 3 tries left: Invalid argument
Accept failed with 2 tries left: Invalid argument
Accept failed with 1 tries left: Invalid argument
Accept failed with 0 tries left: Invalid argument
Ran out of accept retries!
t/harakiri.t ............. ok
2024/06/15-13:08:52 Starman::Server (type Net::Server::PreFork) starting! pid(393412)
Binding to TCP port 44823 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:08:52 Server closing!
t/lf_only_request.t ...... ok
2024/06/15-13:08:52 Starman::Server (type Net::Server::PreFork) starting! pid(393419)
Binding to TCP port 46713 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:08:52 Server closing!
t/no_chunked_head.t ...... ok
t/release-findbin.t ...... skipped: these tests are for release candidate testing
t/release-rand.t ......... skipped: these tests are for release candidate testing
2024/06/15-13:08:52 Starman::Server (type Net::Server::PreFork) starting! pid(393428)
Binding to TCP port 36993 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:08:52 Server closing!
t/single_zero.t .......... ok
t/ssl.t .................. skipped: Test requires module 'LWP::Protocol::https' but it's not found
t/ssl_largebody.t ........ skipped: Test requires module 'LWP::Protocol::https' but it's not found
2024/06/15-13:08:52 Starman::Server (type Net::Server::PreFork) starting! pid(393437)
Binding to TCP port 34661 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/06/15-13:08:53 Server closing!
t/suite.t ................ ok
All tests successful.
Files=17, Tests=121, 65 wallclock secs ( 0.08 usr 0.01 sys + 1.93 cusr 0.48 csys = 2.50 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Data::Dump 1.25 0
HTTP::Date 6.06 0
HTTP::Parser::XS 0.17 0
HTTP::Status 6.46 0
LWP::UserAgent 6.77 0
Net::Server 2.014 2.007
Plack 1.0051 0.9971
Test::More 1.302199 0
Test::Requires 0.11 0
Test::TCP 2.22 2.00
parent 0.238 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.84
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.84
Module::Build 0.4234
Pod::Parser 0
Pod::Simple 3.43
Test2 1.302199
Test::Harness 3.48
Test::More 1.302199
version 0.9932
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/thr-ld/conf/perl-5.36.3/.cpanplus/5.36.3/build/Tbd5QZXaBR/Starman-0.4017/blib/script:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/1xMh2JUqBt/lib/perl5:/home/cpan/pit/thr-ld/conf/perl-5.36.3/.cpanplus/5.36.3/build/Tbd5QZXaBR/Starman-0.4017/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.36.3/.cpanplus/5.36.3/build/Tbd5QZXaBR/Starman-0.4017/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 387284
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr-ld/conf/perl-5.36.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/1xMh2JUqBt
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/1xMh2JUqBt"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/1xMh2JUqBt
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr-ld/perl-5.36.3/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 36 subversion 3) configuration:
Platform:
osname=linux
osvers=5.15.0-91-generic
archname=x86_64-linux-thread-multi-ld
uname='linux uchder 5.15.0-91-generic #101-ubuntu smp tue nov 14 13:30:08 utc 2023 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr-ld/perl-5.36.3 -Dusethreads -Duselongdouble'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='11.4.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/x86_64-linux-gnu /usr/lib /usr/lib64
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/x86_64-linux-gnu/libc.so.6
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.35'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under linux
Compiled at Dec 9 2023 17:25:58
%ENV:
PERL5LIB="/home/cpan/pit/jail/1xMh2JUqBt/lib/perl5:/home/cpan/pit/thr-ld/conf/perl-5.36.3/.cpanplus/5.36.3/build/Tbd5QZXaBR/Starman-0.4017/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.36.3/.cpanplus/5.36.3/build/Tbd5QZXaBR/Starman-0.4017/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="387284"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr-ld/conf/perl-5.36.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/1xMh2JUqBt"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/1xMh2JUqBt""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/1xMh2JUqBt"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/1xMh2JUqBt/lib/perl5/5.36.3/x86_64-linux-thread-multi-ld
/home/cpan/pit/jail/1xMh2JUqBt/lib/perl5/5.36.3
/home/cpan/pit/jail/1xMh2JUqBt/lib/perl5/x86_64-linux-thread-multi-ld
/home/cpan/pit/jail/1xMh2JUqBt/lib/perl5
/home/cpan/pit/thr-ld/conf/perl-5.36.3/.cpanplus/5.36.3/build/Tbd5QZXaBR/Starman-0.4017/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.36.3/.cpanplus/5.36.3/build/Tbd5QZXaBR/Starman-0.4017/blib/arch
/home/cpan/pit/thr-ld/perl-5.36.3/lib/site_perl/5.36.3/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.36.3/lib/site_perl/5.36.3
/home/cpan/pit/thr-ld/perl-5.36.3/lib/5.36.3/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.36.3/lib/5.36.3