Back
From: metabase:user:30dda8bc-2aae-11df-837a-5e0a49663a4f
Subject: NA Catalyst-Model-Memcached-0.02 v5.8.8 GNU/Linux
Date: 2011-04-10T16:53:19Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Denis Pokataev,
This is a computer-generated report for Catalyst-Model-Memcached-0.02
on perl 5.8.8, created by CPAN-Reporter-1.1902.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Catalyst::Model::Memcached;'
# at t/001_load.t line 18.
# Tried to use 'Catalyst::Model::Memcached'.
# Error: Perl v5.10.0 required--this is only v5.8.8, stopped at /tmp/cpan/CentOS-5.4-x86_64/build/Catalyst-Model-Memcached-0.02-I02HgZ/blib/lib/Catalyst/Model/Memcached.pm line 5.
# BEGIN failed--compilation aborted at /tmp/cpan/CentOS-5.4-x86_64/build/Catalyst-Model-Memcached-0.02-I02HgZ/blib/lib/Catalyst/Model/Memcached.pm line 5.
# Compilation failed in require at (eval 222) line 2.
# BEGIN failed--compilation aborted at (eval 222) line 2.
Can't locate object method "set_primary_key" via package "MyApp::Test" at t/001_load.t line 9.
# Looks like you planned 18 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/001_load.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 18/18 subtests
Test Summary Report
-------------------
t/001_load.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 18 tests but ran 1.
Files=1, Tests=1, 1 wallclock secs ( 0.01 usr 0.01 sys + 0.28 cusr 0.02 csys = 0.32 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
---------------------- ---- -------
Cache::Memcached::Fast 0.17 0.19
Catalyst::Runtime 5.8 5.89002
Test::More 0.44 0.98
build_requires:
Module Need Have
---------------------- ---- -------
ExtUtils::MakeMaker 0 6.57_10
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.utf8
PATH = /net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin
PERL5LIB = /net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64/lib/perl5/x86_64-linux-thread-multi:/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64/lib/perl5
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 630
PERL5_CPAN_IS_RUNNING = 630
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 18080,630
PERLBREW_ROOT = /net/netfile2/ag-russell/install/CentOS-5.4-x86_64/perlbrew
PERL_CR_SMOKER_CURRENT = Catalyst-Model-Memcached-0.02
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64
PERL_MB_OPT = --install_base /net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64
PERL_MM_OPT = INSTALL_BASE=/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/bin/perl
$UID/$EUID = 2699 / 2699
$GID = 2048 10099 10004 10003 10000 2048
$EGID = 2048 10099 10004 10003 10000 2048
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9600
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.17
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.57_10
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Module::Signature 0.66
Test::Harness 3.23
Test::More 0.98
YAML 0.72
YAML::Syck 1.17
version 0.88
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.18-53.el5, archname=x86_64-linux-thread-multi
uname='linux builder10.centos.org 2.6.18-53.el5 #1 smp mon nov 12 02:14:55 est 2007 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Dversion=5.8.8 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Dlibpth=/usr/local/lib64 /lib64 /usr/lib64 -Dprivlib=/usr/lib/perl5/5.8.8 -Dsitelib=/usr/lib/perl5/site_perl/5.8.8 -Dvendorlib=/usr/lib/perl5/vendor_perl/5.8.8 -Darchlib=/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi -Dsitearch=/usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi -Dvendorarch=/usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi -Darchname=x86_64-linux-thread-multi -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.7 5.8.6 5.8.5 -Dscriptdir=/usr/bin'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -I/usr/include/gdbm'
ccversion='', gccversion='4.1.2 20080704 (Red Hat 4.1.2-46)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =''
libpth=/usr/local/lib64 /lib64 /usr/lib64
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.5'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_REENTRANT_API
Built under linux
Compiled at Sep 3 2009 10:26:51
%ENV:
PERL5LIB="/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64/lib/perl5/x86_64-linux-thread-multi:/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64/lib/perl5"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="630"
PERL5_CPAN_IS_RUNNING="630"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="18080,630"
PERLBREW_ROOT="/net/netfile2/ag-russell/install/CentOS-5.4-x86_64/perlbrew"
PERL_CR_SMOKER_CURRENT="Catalyst-Model-Memcached-0.02"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64"
PERL_MB_OPT="--install_base /net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64"
PERL_MM_OPT="INSTALL_BASE=/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64"
PERL_MM_USE_DEFAULT="1"
@INC:
/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64/lib/perl5/x86_64-linux-thread-multi
/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64/lib/perl5/x86_64-linux-thread-multi
/net/netfile2/ag-russell/perl-smoker/CentOS-5.4-x86_64/lib/perl5
/usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8
/usr/lib/perl5/site_perl
/usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8
/usr/lib/perl5/vendor_perl
/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi
/usr/lib/perl5/5.8.8
.