Inline-C v0.79_001 Perl 5 v5.18.0 amd64-freebsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Inline-C v0.79_001
- Platform
- Perl 5 v5.18.0 amd64-freebsd
- Date
- 2019-01-28 00:17:05
- ID
- 0b0b0cfc-2292-11e9-98d5-bb14e5798fec
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TINITA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9176. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/bare/perl-5.18.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t ................ ok
t/01syntax.t ........................... ok
t/02config.t ........................... ok
t/03typemap.t .......................... ok
t/04perlapi.t .......................... ok
t/05xsmode.t ........................... ok
t/06parseregexp.t ...................... ok
t/07typemap_multi.t .................... ok
t/08taint.t ............................ ok
This test could take a couple of minutes to run
t/09parser.t ........................... ok
t/10callback.t ......................... ok
t/11default_readonly.t ................. ok
t/14void_arg.t ......................... ok
t/14void_arg_PRD.t ..................... ok
t/15ccflags.t .......................... ok
t/16ccflagsex.t ........................ ok
t/17prehead.t .......................... ok
t/18quote_space.t ...................... ok
t/19INC.t .............................. ok
t/20eval.t ............................. ok
t/21read_DATA.t ........................ ok
t/22read_DATA_2.t ...................... ok
t/23validate.t ......................... ok
t/24prefix.t ........................... ok
t/25proto.t ............................ ok
t/26fork.t ............................. ok
t/27inline_maker.t ..................... ok
t/28autowrap.t ......................... ok
t/30cppflags.t ......................... ok
t/31include_dirs_angle_brackets.t ...... ok
Expected:
[[[ BEGIN EXPECTED ERRORS ]]]
PURPOSEFUL COMPILER ERROR!
A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
"make > out.make 2>&1" with error code 2
[[[ END EXPECTED ERRORS ]]]
Got:
[[[ BEGIN RECEIVED ERRORS ]]]
Running Mkbootstrap for eval_4_8023 ()
chmod 644 "eval_4_8023.bs"
"/usr/home/cpan/pit/bare/perl-5.18.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- eval_4_8023.bs blib/arch/auto/eval_4_8023/eval_4_8023.bs 644
"/usr/home/cpan/pit/bare/perl-5.18.0/bin/perl" "/usr/home/cpan/pit/bare/perl-5.18.0/lib/site_perl/5.18.0/ExtUtils/xsubpp" -typemap "/usr/home/cpan/pit/bare/perl-5.18.0/lib/5.18.0/ExtUtils/typemap" -typemap "/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/t/typemap" eval_4_8023.xs > eval_4_8023.xsc
mv eval_4_8023.xsc eval_4_8023.c
cc -c -iquote"/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/t" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -O2 -DVERSION=\"0.00\" -DXS_VERSION=\"0.00\" -DPIC -fPIC "-I/usr/home/cpan/pit/bare/perl-5.18.0/lib/5.18.0/amd64-freebsd/CORE" eval_4_8023.c
In file included from eval_4_8023.xs:5:
/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/t/stdio.h:1:1: error: unknown type name 'PURPOSEFUL'
PURPOSEFUL COMPILER ERROR!
^
/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/t/stdio.h:1:20: error: expected ';' after top level declarator
PURPOSEFUL COMPILER ERROR!
^
;
eval_4_8023.c:173:11: warning: implicit declaration of function 'foo' is invalid in C99 [-Wimplicit-function-declaration]
RETVAL = foo();
^
1 warning and 2 errors generated.
*** Error code 1
Stop.
make[1]: stopped in /usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/_Inline_32include_dirs_double_quotes_bad.48346/build/eval_4_8023
A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
"make > out.make 2>&1" with error code 1
The build directory was:
/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/_Inline_32include_dirs_double_quotes_bad.48346/build/eval_4_8023
To debug the problem, cd to the build directory, and inspect the output files.
Environment MAKEFLAGS = ''
Environment MAKELEVEL = '1'
Environment PATH = '/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin'
at (eval 4) line 10.
...propagated at /usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/blib/lib/Inline/C.pm line 882.
BEGIN failed--compilation aborted at (eval 4) line 10.
[[[ END RECEIVED ERRORS ]]]
t/32include_dirs_double_quotes_bad.t ...
Failed 1/1 subtests
t/33include_dirs_double_quotes_good.t .. ok
t/author-pod-syntax.t .................. skipped: these tests are for testing by the author
t/parse-pegex.t ........................ ok
t/pegex-parser.t ....................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
Test Summary Report
-------------------
t/32include_dirs_double_quotes_bad.t (Wstat: 0 Tests: 1 Failed: 1)
Failed test: 1
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=35, Tests=157, 87 wallclock secs ( 0.18 usr 0.10 sys + 57.58 cusr 28.19 csys = 86.05 CPU)
Result: FAIL
Failed 1/35 test programs. 1/157 subtests failed.
*** Error code 255
Stop.
make: stopped in /usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.34 7.00
File::Copy::Recursive 0.44 0
File::Path 2.16 0
File::Spec 3.75 0.8
Inline 0.80 0.79
Parse::RecDescent 1.967015 1.967009
Pegex 0.70 0.58
Test::More 1.302141 0.88
Test::Warn 0.36 0.23
YAML::XS 0.76 0
autodie 2.13 0
version 0.9924 0.77
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9176
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.34
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.71
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4224
Pod::Parser 1.60
Pod::Simple 3.28
Test2 1.302141
Test::Harness 3.42
Test::More 1.302141
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.06.
Powered by minismokebox version 0.68
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/e6WTczDJ11/lib/perl5:/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 42718
PERL5_CPANPLUS_IS_VERSION = 0.9176
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.18.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/e6WTczDJ11
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/e6WTczDJ11"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/e6WTczDJ11
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.18.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 0) configuration:
Platform:
osname=freebsd, osvers=12.0-release, archname=amd64-freebsd
uname='freebsd fforc 12.0-release freebsd 12.0-release r341666 generic amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.18.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 6.0.1 (tags/RELEASE_601/final 335540)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.52
Built under freebsd
Compiled at Dec 20 2018 22:03:43
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/e6WTczDJ11/lib/perl5:/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="42718"
PERL5_CPANPLUS_IS_VERSION="0.9176"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.18.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/e6WTczDJ11"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/e6WTczDJ11""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/e6WTczDJ11"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/jail/e6WTczDJ11/lib/perl5/5.18.0/amd64-freebsd
/usr/home/cpan/pit/jail/e6WTczDJ11/lib/perl5/5.18.0
/usr/home/cpan/pit/jail/e6WTczDJ11/lib/perl5/amd64-freebsd
/usr/home/cpan/pit/jail/e6WTczDJ11/lib/perl5
/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.18.0/.cpanplus/5.18.0/build/2L4yPw2aMs/Inline-C-0.79_001/blib/arch
/usr/home/cpan/pit/bare/perl-5.18.0/lib/site_perl/5.18.0/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.18.0/lib/site_perl/5.18.0
/usr/home/cpan/pit/bare/perl-5.18.0/lib/5.18.0/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.18.0/lib/5.18.0
.