PAR-Packer v1.063 Perl 5 v5.22.0 i686-linux
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
PAR-Packer v1.063
- Platform
- Perl 5 v5.22.0 i686-linux
- Date
- 2024-03-18 22:51:29
- ID
- 0f187ae0-e57a-11ee-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear RSCHUPP,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
make[1]: Entering directory '/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/t/data/XSFoo'
"/home/cpan/pit/bare/perl-5.22.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XSFoo.bs ../blib/arch/auto/XSFoo/XSFoo.bs 644
make[1]: Leaving directory '/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/t/data/XSFoo'
make[1]: Entering directory '/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/myldr'
Makefile:855: warning: overriding recipe for target '.c.o'
Makefile:341: warning: ignoring old recipe for target '.c.o'
make[1]: Leaving directory '/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/myldr'
make[1]: Entering directory '/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/t/data/XSFoo'
"/home/cpan/pit/bare/perl-5.22.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XSFoo.bs ../blib/arch/auto/XSFoo/XSFoo.bs 644
No tests defined for XSFoo extension.
make[1]: Leaving directory '/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/t/data/XSFoo'
make[1]: Entering directory '/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/myldr'
Makefile:855: warning: overriding recipe for target '.c.o'
Makefile:341: warning: ignoring old recipe for target '.c.o'
No tests defined for myldr extension.
make[1]: Leaving directory '/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/myldr'
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.22.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-pod.t ............... skipped: Set environment variable PERL_TEST_POD=1 to test POD
t/10-parl-generation.t ... ok
/tmp/nkquHQgtEa syntax OK
t/20-pp.t ................ ok
t/30-current_exec.t ...... ok
t/40-packer_cd_option.t .. ok
t/80-doublecolon.t ....... ok
t/85-crt-glob.t .......... ok
t/85-ldlibpthname.t ...... ok
t/85-myfile.t ............ ok
# dl_shared_objects = /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/e79d957c.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/850eeb99.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/b0fce0d7.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/746574a4.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/eea49816.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/f89d373c.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/cc4f4727.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/c418f9a8.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/c303ca7e.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/0b8fc741.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/e846f552.so /tmp/NzX364mVYO/par-6370616e/cache-feb29332e1b9536ff5a182039364c442cbcb6d50/inc/lib/auto/XSFoo/XSFoo.so
# dl_modules = IO Fcntl Cwd Compress::Raw::Zlib List::Util Encode File::Glob Digest::SHA PerlIO::scalar Tie::Hash::NamedCapture attributes XSFoo
# greetings from XSFoo
t/86-xs-exe.t ............ ok
t/86-xs-par.t ............ ok
t/87-xs-cross.t .......... skipped: Tests only relevant on Windows
t/90-exitcode.t .......... ok
t/90-gh41.t .............. skipped: Tests only relevant on Windows
t/90-gh66.t .............. ok
# PAR_TEMP = /tmp/iyBmlXk9dl/par-6370616e/cache-c540c0df7dee5f870fed7df2279a2a7cc4af01d5
# running /tmp/iyBmlXk9dl/pp000 a second time
# running /tmp/iyBmlXk9dl/pp000 a third time
t/90-rt101800.t .......... ok
t/90-rt103861.t .......... ok
t/90-rt104560.t .......... ok
t/90-rt104635.t .......... ok
t/90-rt122949.t .......... skipped: Tests only relevant on Windows
t/90-rt127064.t .......... skipped: Tests only relevant on Windows
t/90-rt129312.t .......... ok
# found core module Carp in /home/cpan/pit/bare/perl-5.22.0/lib/5.22.0/Carp.pm
# found core module Exporter in /home/cpan/pit/bare/perl-5.22.0/lib/5.22.0/Exporter.pm
# found core module File::Glob in /home/cpan/pit/bare/perl-5.22.0/lib/5.22.0/i686-linux/File/Glob.pm
# found core module List::Util in /home/cpan/pit/bare/perl-5.22.0/lib/5.22.0/i686-linux/List/Util.pm
t/90-rt130685.t .......... ok
t/90-rt59710.t ........... ok
All tests successful.
Files=24, Tests=161, 58 wallclock secs ( 0.06 usr 0.02 sys + 44.03 cusr 7.47 csys = 51.58 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Archive::Zip 1.68 1.02
Compress::Zlib 2.206 1.30
Digest::SHA 6.04 5.40
ExtUtils::MakeMaker 7.70 0
File::Temp 0.2311 0.05
Getopt::ArgvFile 1.11 1.07
IO::Compress::Gzip 2.206 0
IPC::Run3 0.049 0.048
Module::ScanDeps 1.35 1.21
PAR 1.020 1.020
PAR::Dist 0.52 0.22
Test::More 1.302198 0
Text::ParseWords 3.30 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.75
Module::Build 0.4234
Pod::Parser 1.63
Pod::Simple 3.29
Test2 1.302198
Test::Harness 3.48
Test::More 1.302198
version 0.9930
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/blib/script:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/b1pvtoziio/lib/perl5:/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/blib/lib:/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 2614
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.22.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/b1pvtoziio
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/b1pvtoziio"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/b1pvtoziio
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.22.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 22 subversion 0) configuration:
Platform:
osname=linux, osvers=5.10.0-12-686, archname=i686-linux
uname='linux dagobah 5.10.0-12-686 #1 smp debian 5.10.103-1 (2022-03-07) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.22.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='10.2.1 20210110', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12, longdblkind=3
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/include/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME
USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Mar 17 2022 19:32:58
%ENV:
PERL5LIB="/home/cpan/pit/jail/b1pvtoziio/lib/perl5:/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/blib/lib:/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="2614"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.22.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/b1pvtoziio"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/b1pvtoziio""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/b1pvtoziio"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/b1pvtoziio/lib/perl5/5.22.0/i686-linux
/home/cpan/pit/jail/b1pvtoziio/lib/perl5/5.22.0
/home/cpan/pit/jail/b1pvtoziio/lib/perl5/i686-linux
/home/cpan/pit/jail/b1pvtoziio/lib/perl5
/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/blib/lib
/home/cpan/pit/bare/conf/perl-5.22.0/.cpanplus/5.22.0/build/dRBEmSL9RT/PAR-Packer-1.063/blib/arch
/home/cpan/pit/bare/perl-5.22.0/lib/site_perl/5.22.0/i686-linux
/home/cpan/pit/bare/perl-5.22.0/lib/site_perl/5.22.0
/home/cpan/pit/bare/perl-5.22.0/lib/5.22.0/i686-linux
/home/cpan/pit/bare/perl-5.22.0/lib/5.22.0
.