Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL SQL-Functional-0.1 v5.22.0 Debian GNU/kFreeBSD
Date: 2016-08-02T06:40:56Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TMURRAY,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9156. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/rel/perl-5.22.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use SQL::Functional::Clause;'
# at t/001_load.t line 27.
# Tried to use 'SQL::Functional::Clause'.
# Error: Can't locate Moose/Role.pm in @INC (you may need to install the Moose::Role module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/Clause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/Clause.pm line 28.
# Compilation failed in require at t/001_load.t line 27.
# BEGIN failed--compilation aborted at t/001_load.t line 27.
# Failed test 'use SQL::Functional::AndClause;'
# at t/001_load.t line 28.
# Tried to use 'SQL::Functional::AndClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
# Compilation failed in require at t/001_load.t line 28.
# BEGIN failed--compilation aborted at t/001_load.t line 28.
# Failed test 'use SQL::Functional::FieldClause;'
# at t/001_load.t line 29.
# Tried to use 'SQL::Functional::FieldClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/FieldClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/FieldClause.pm line 28.
# Compilation failed in require at t/001_load.t line 29.
# BEGIN failed--compilation aborted at t/001_load.t line 29.
# Failed test 'use SQL::Functional::FromClause;'
# at t/001_load.t line 30.
# Tried to use 'SQL::Functional::FromClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/FromClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/FromClause.pm line 28.
# Compilation failed in require at t/001_load.t line 30.
# BEGIN failed--compilation aborted at t/001_load.t line 30.
# Failed test 'use SQL::Functional::GroupByClause;'
# at t/001_load.t line 31.
# Tried to use 'SQL::Functional::GroupByClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/GroupByClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/GroupByClause.pm line 28.
# Compilation failed in require at t/001_load.t line 31.
# BEGIN failed--compilation aborted at t/001_load.t line 31.
# Failed test 'use SQL::Functional::InnerJoinClause;'
# at t/001_load.t line 32.
# Tried to use 'SQL::Functional::InnerJoinClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/InnerJoinClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/InnerJoinClause.pm line 28.
# Compilation failed in require at t/001_load.t line 32.
# BEGIN failed--compilation aborted at t/001_load.t line 32.
# Failed test 'use SQL::Functional::InsertClause;'
# at t/001_load.t line 33.
# Tried to use 'SQL::Functional::InsertClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/InsertClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/InsertClause.pm line 28.
# Compilation failed in require at t/001_load.t line 33.
# BEGIN failed--compilation aborted at t/001_load.t line 33.
# Failed test 'use SQL::Functional::MatchClause;'
# at t/001_load.t line 34.
# Tried to use 'SQL::Functional::MatchClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/MatchClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/MatchClause.pm line 28.
# Compilation failed in require at t/001_load.t line 34.
# BEGIN failed--compilation aborted at t/001_load.t line 34.
# Failed test 'use SQL::Functional::NullClause;'
# at t/001_load.t line 35.
# Tried to use 'SQL::Functional::NullClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/NullClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/NullClause.pm line 28.
# Compilation failed in require at t/001_load.t line 35.
# BEGIN failed--compilation aborted at t/001_load.t line 35.
# Failed test 'use SQL::Functional::OrClause;'
# at t/001_load.t line 36.
# Tried to use 'SQL::Functional::OrClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/OrClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/OrClause.pm line 28.
# Compilation failed in require at t/001_load.t line 36.
# BEGIN failed--compilation aborted at t/001_load.t line 36.
# Failed test 'use SQL::Functional::OrderByClause;'
# at t/001_load.t line 37.
# Tried to use 'SQL::Functional::OrderByClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/OrderByClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/OrderByClause.pm line 28.
# Compilation failed in require at t/001_load.t line 37.
# BEGIN failed--compilation aborted at t/001_load.t line 37.
# Failed test 'use SQL::Functional::PlaceholderClause;'
# at t/001_load.t line 38.
# Tried to use 'SQL::Functional::PlaceholderClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/PlaceholderClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/PlaceholderClause.pm line 28.
# Compilation failed in require at t/001_load.t line 38.
# BEGIN failed--compilation aborted at t/001_load.t line 38.
# Failed test 'use SQL::Functional::UpdateClause;'
# at t/001_load.t line 39.
# Tried to use 'SQL::Functional::UpdateClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/UpdateClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/UpdateClause.pm line 28.
# Compilation failed in require at t/001_load.t line 39.
# BEGIN failed--compilation aborted at t/001_load.t line 39.
# Failed test 'use SQL::Functional::ValuesClause;'
# at t/001_load.t line 40.
# Tried to use 'SQL::Functional::ValuesClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/ValuesClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/ValuesClause.pm line 28.
# Compilation failed in require at t/001_load.t line 40.
# BEGIN failed--compilation aborted at t/001_load.t line 40.
# Failed test 'use SQL::Functional::VerbatimClause;'
# at t/001_load.t line 41.
# Tried to use 'SQL::Functional::VerbatimClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/VerbatimClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/VerbatimClause.pm line 28.
# Compilation failed in require at t/001_load.t line 41.
# BEGIN failed--compilation aborted at t/001_load.t line 41.
# Failed test 'use SQL::Functional::WhereClause;'
# at t/001_load.t line 42.
# Tried to use 'SQL::Functional::WhereClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/WhereClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/WhereClause.pm line 28.
# Compilation failed in require at t/001_load.t line 42.
# BEGIN failed--compilation aborted at t/001_load.t line 42.
# Failed test 'use SQL::Functional::WrapClause;'
# at t/001_load.t line 43.
# Tried to use 'SQL::Functional::WrapClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/WrapClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/WrapClause.pm line 28.
# Compilation failed in require at t/001_load.t line 43.
# BEGIN failed--compilation aborted at t/001_load.t line 43.
# Failed test 'use SQL::Functional::SelectClause;'
# at t/001_load.t line 44.
# Tried to use 'SQL::Functional::SelectClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/SelectClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/SelectClause.pm line 28.
# Compilation failed in require at t/001_load.t line 44.
# BEGIN failed--compilation aborted at t/001_load.t line 44.
# Failed test 'use SQL::Functional::SetClause;'
# at t/001_load.t line 45.
# Tried to use 'SQL::Functional::SetClause'.
# Error: Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/SetClause.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/SetClause.pm line 28.
# Compilation failed in require at t/001_load.t line 45.
# BEGIN failed--compilation aborted at t/001_load.t line 45.
# Failed test 'use SQL::Functional;'
# at t/001_load.t line 46.
# Tried to use 'SQL::Functional'.
# Error: Attempt to reload SQL/Functional/AndClause.pm aborted.
# Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
# BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpat/001_load.t ..................
Dubious, test returned 20 (wstat 5120, 0x1400)
Failed 20/20 subtests
nplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
# Compilation failed in require at t/001_load.t line 46.
# BEGIN failed--compilation aborted at t/001_load.t line 46.
# Looks like you failed 20 tests of 20.
t/002_pod.t ................... ok
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/010_basic_select.t line 26.
BEGIN failed--compilation aborted at t/010_basic_select.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/010_basic_select.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/020_select_fields.t line 26.
BEGIN failed--compilation aborted at t/020_select_fields.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/020_select_fields.t .........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/030_params.t line 26.
BEGIN failed--compilation aborted at t/030_params.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/030_params.t ................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/040_select_join.t line 26.
BEGIN failed--compilation aborted at t/040_select_join.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/040_select_join.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/050_order_by.t line 26.
BEGIN failed--compilation aborted at t/050_order_by.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/050_order_by.t ..............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/060_table_alias.t line 26.
BEGIN failed--compilation aborted at t/060_table_alias.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/060_table_alias.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/070_subselect.t line 26.
BEGIN failed--compilation aborted at t/070_subselect.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/070_subselect.t .............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/080_and_select.t line 26.
BEGIN failed--compilation aborted at t/080_and_select.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/080_and_select.t ............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/090_or_select.t line 26.
BEGIN failed--compilation aborted at t/090_or_select.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/090_or_select.t .............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/100_nested_and_or_select.t line 26.
BEGIN failed--compilation aborted at t/100_nested_and_or_select.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/100_nested_and_or_select.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/110_basic_insert.t line 26.
BEGIN failed--compilation aborted at t/110_basic_insert.t line 26.
# Looks like your test exited with 2 before it could output anything.
t/110_basic_insert.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/120_basic_update.t line 26.
BEGIN failed--compilation aborted at t/120_basic_update.t line 26.
t/120_basic_update.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 4/4 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/130_basic_delete.t line 26.
BEGIN failed--compilation aborted at t/130_basic_delete.t line 26.
t/130_basic_delete.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 4/4 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/140_dynamic_where.t line 26.
BEGIN failed--compilation aborted at t/140_dynamic_where.t line 26.
t/140_dynamic_where.t .........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/150_multi_from.t line 26.
BEGIN failed--compilation aborted at t/150_multi_from.t line 26.
t/150_multi_from.t ............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/160_dynamic_from.t line 26.
BEGIN failed--compilation aborted at t/160_dynamic_from.t line 26.
t/160_dynamic_from.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/170_match_verbatim.t line 26.
BEGIN failed--compilation aborted at t/170_match_verbatim.t line 26.
t/170_match_verbatim.t ........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/180_field_alias.t line 26.
BEGIN failed--compilation aborted at t/180_field_alias.t line 26.
t/180_field_alias.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/190_insert_subselect.t line 26.
BEGIN failed--compilation aborted at t/190_insert_subselect.t line 26.
t/190_insert_subselect.t ......
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/200_null.t line 26.
BEGIN failed--compilation aborted at t/200_null.t line 26.
t/200_null.t ..................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/210_not_null.t line 26.
BEGIN failed--compilation aborted at t/210_not_null.t line 26.
t/210_not_null.t ..............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
# Looks like your test exited with 2 before it could output anything.
Can't locate Moose.pm in @INC (you may need to install the Moose module) (@INC contains: /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0 /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int /home/cpan/pit/rel/perl-5.22.0/lib/5.22.0 .) at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional/AndClause.pm line 28.
Compilation failed in require at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib/SQL/Functional.pm line 28.
Compilation failed in require at t/220_group_by.t line 26.
BEGIN failed--compilation aborted at t/220_group_by.t line 26.
t/220_group_by.t ..............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Test Summary Report
-------------------
t/001_load.t (Wstat: 5120 Tests: 20 Failed: 20)
Failed tests: 1-20
Non-zero exit status: 20
t/010_basic_select.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/020_select_fields.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/030_params.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/040_select_join.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/050_order_by.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/060_table_alias.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/070_subselect.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/080_and_select.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/090_or_select.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/100_nested_and_or_select.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/110_basic_insert.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/120_basic_update.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 4 tests but ran 0.
t/130_basic_delete.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 4 tests but ran 0.
t/140_dynamic_where.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/150_multi_from.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/160_dynamic_from.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/170_match_verbatim.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/180_field_alias.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/190_insert_subselect.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/200_null.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/210_not_null.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/220_group_by.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
Files=24, Tests=42, 1 wallclock secs ( 0.05 usr 0.07 sys + 0.53 cusr 0.13 csys = 0.78 CPU)
Result: FAIL
# Looks like your test exited with 2 before it could output anything.
Failed 23/24 test programs. 20/42 subtests failed.
make: *** [test_dynamic] Error 2
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Moose::Role
Moose
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'TMURRAY (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Moose::Role' => '0', # or a minimum working version
'Moose' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.14 0
Test::Pod 1.51 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9156
CPANPLUS::Dist::Build 0.78
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.14
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.14
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
Module::Build 0.4218
Pod::Parser 1.63
Pod::Simple 3.29
Test::Harness 3.36
Test::More 1.001014
version 0.9916
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.98.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = :/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib:/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch:/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib:/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 99049
PERL5_CPANPLUS_IS_VERSION = 0.9156
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /home/cpan/pit/rel/conf/perl-5.22.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/rel/perl-5.22.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 22 subversion 0) configuration:
Platform:
osname=gnukfreebsd, osvers=9.0-2-686, archname=i386-gnukfreebsd-thread-multi-64int
uname='gnukfreebsd knurl 9.0-2-686 #0 sun may 17 22:06:56 utc 2015 i386 i386 intel(r) pentium(r) cpu g840 @ 2.80ghz gnukfreebsd '
config_args='-des -Dprefix=/home/cpan/pit/rel/perl-5.22.0 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.7.2', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12, longdblkind=3
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/i486-kfreebsd-gnu/4.7/include-fixed /usr/include/i386-kfreebsd-gnu /usr/lib /lib/i386-kfreebsd-gnu /lib /usr/lib/i386-kfreebsd-gnu
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=/usr/lib/i386-kfreebsd-gnu/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.13'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.38
Built under gnukfreebsd
Compiled at Nov 11 2015 00:03:41
%ENV:
PERL5LIB=":/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib:/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch:/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib:/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="99049"
PERL5_CPANPLUS_IS_VERSION="0.9156"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/home/cpan/pit/rel/conf/perl-5.22.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/lib
/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/nOrmC9bRhn/Test-Pod-1.51/blib/arch
/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/lib
/home/cpan/pit/rel/conf/perl-5.22.0/.cpanplus/5.22.0/build/TwRoUJwPyQ/SQL-Functional-0.1/blib/arch
/home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0/i386-gnukfreebsd-thread-multi-64int
/home/cpan/pit/rel/perl-5.22.0/lib/site_perl/5.22.0
/home/cpan/pit/rel/perl-5.22.0/lib/5.22.0/i386-gnukfreebsd-thread-multi-64int
/home/cpan/pit/rel/perl-5.22.0/lib/5.22.0
.