Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL X11-Protocol-0.56 v5.14.0 Dragonfly BSD
Date: 2011-06-21T11:39:04Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Stephen McCamant,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9105. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Jun 21 12:38:36 2011] Using cached file '/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/authors/id/K/KR/KRYDE/CHECKSUMS' on disk; ttl (3600s) is not exceeded
[MSG] [Tue Jun 21 12:38:36 2011] Checksum matches for 'X11-Protocol-Other-10.tar.gz'
[MSG] [Tue Jun 21 12:38:36 2011] Extracted 'X11::Protocol::Other' to '/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-Other-10'
[MSG] [Tue Jun 21 12:38:37 2011] CPANPLUS is prefering Build.PL
[MSG] [Tue Jun 21 12:38:37 2011] Loading YACSmoke database "/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/cpansmoke.dat"
[MSG] [Tue Jun 21 12:38:37 2011] Checking if your kit is complete...
Looks good
Warning: prerequisite X11::Protocol 0 not found.
Writing Makefile for X11-Protocol-Other
Writing MYMETA.yml
[MSG] [Tue Jun 21 12:38:37 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jun 21 12:38:37 2011] Checking for previous PASS result for "X11-Protocol-Other-10"
[MSG] [Tue Jun 21 12:38:37 2011] Module 'X11::Protocol::Other' requires 'X11::Protocol' version '0' to be installed
[MSG] [Tue Jun 21 12:38:37 2011] Trying to get 'ftp://cpan.bingosnet.co.uk/CPAN/authors/id/S/SM/SMCCAM/CHECKSUMS'
[MSG] [Tue Jun 21 12:38:38 2011] Checksum matches for 'X11-Protocol-0.56.tar.gz'
[MSG] [Tue Jun 21 12:38:39 2011] Extracted 'X11::Protocol' to '/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-0.56'
[MSG] [Tue Jun 21 12:38:39 2011] CPANPLUS is prefering Build.PL
[MSG] [Tue Jun 21 12:38:39 2011] Checking if your kit is complete...
Looks good
Writing Makefile for X11::Protocol
Writing MYMETA.yml
[MSG] [Tue Jun 21 12:38:39 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jun 21 12:38:39 2011] Checking for previous PASS result for "X11-Protocol-0.56"
[MSG] [Tue Jun 21 12:38:41 2011] cp Protocol.pm blib/lib/X11/Protocol.pm
cp Protocol/Ext/XC_MISC.pm blib/lib/X11/Protocol/Ext/XC_MISC.pm
cp Protocol/Ext/SHAPE.pm blib/lib/X11/Protocol/Ext/SHAPE.pm
cp Protocol/Ext/BIG_REQUESTS.pm blib/lib/X11/Protocol/Ext/BIG_REQUESTS.pm
cp Protocol/Connection/UNIXFH.pm blib/lib/X11/Protocol/Connection/UNIXFH.pm
cp Protocol/Connection/INETSocket.pm blib/lib/X11/Protocol/Connection/INETSocket.pm
cp Keysyms.pm blib/lib/X11/Keysyms.pm
cp Protocol/Ext/XFree86_Misc.pm blib/lib/X11/Protocol/Ext/XFree86_Misc.pm
cp Protocol/Connection/Socket.pm blib/lib/X11/Protocol/Connection/Socket.pm
cp Protocol/Constants.pm blib/lib/X11/Protocol/Constants.pm
cp Auth.pm blib/lib/X11/Auth.pm
cp Protocol/Connection/UNIXSocket.pm blib/lib/X11/Protocol/Connection/UNIXSocket.pm
cp Protocol/Ext/DPMS.pm blib/lib/X11/Protocol/Ext/DPMS.pm
cp Protocol/Ext/RENDER.pm blib/lib/X11/Protocol/Ext/RENDER.pm
cp Protocol/Connection/INETFH.pm blib/lib/X11/Protocol/Connection/INETFH.pm
cp Protocol/Connection.pm blib/lib/X11/Protocol/Connection.pm
cp Protocol/Connection/FileHandle.pm blib/lib/X11/Protocol/Connection/FileHandle.pm
Manifying blib/man3/X11::Protocol::Ext::SHAPE.3
Manifying blib/man3/X11::Protocol::Ext::XC_MISC.3
Manifying blib/man3/X11::Protocol.3
Manifying blib/man3/X11::Protocol::Ext::BIG_REQUESTS.3
Manifying blib/man3/X11::Protocol::Connection::UNIXFH.3
Manifying blib/man3/X11::Protocol::Connection::INETSocket.3
Manifying blib/man3/X11::Keysyms.3
Manifying blib/man3/X11::Protocol::Ext::XFree86_Misc.3
Manifying blib/man3/X11::Protocol::Connection::Socket.3
Manifying blib/man3/X11::Auth.3
Manifying blib/man3/X11::Protocol::Connection::UNIXSocket.3
Manifying blib/man3/X11::Protocol::Ext::DPMS.3
Manifying blib/man3/X11::Protocol::Ext::RENDER.3
Manifying blib/man3/X11::Protocol::Connection::INETFH.3
Manifying blib/man3/X11::Protocol::Connection.3
Manifying blib/man3/X11::Protocol::Connection::FileHandle.3
[ERROR] [Tue Jun 21 12:38:41 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/pit/64bit/perl-5.14.0/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..3
ok 1
Can't find DISPLAY -- guessing `unix:0' at test.pl line 32
Can't connect to display `unix:0': No such file or directory at blib/lib/X11/Protocol.pm line 2264
*** Error code 2
Stop in /usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-0.56.
[MSG] [Tue Jun 21 12:38:41 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.57_05 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9105
CPANPLUS::Dist::Build 0.56
Cwd 3.36
ExtUtils::CBuilder 0.280203
ExtUtils::Command 1.17
ExtUtils::Install 1.56
ExtUtils::MakeMaker 6.57_05
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2210
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.91
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.62.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/pkg/sbin:/usr/pkg/bin:/usr/pkg/xorg/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-0.56/blib/lib:/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-0.56/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 7846
PERL5_CPANPLUS_IS_VERSION = 0.9105
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/64bit/conf/perl-5.14.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/64bit/perl-5.14.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1003 1003
EGID: $) = 1003 1003
-------------------------------
--
Summary of my perl5 (revision 5 version 14 subversion 0) configuration:
Platform:
osname=dragonfly, osvers=2.10-release, archname=i386-dragonfly-64int
uname='dragonfly diktat.bingosnet.co.uk 2.10-release dragonfly v2.10.1.1.gf7ba0-release #1: mon apr 25 19:48:10 utc 2011 root@pkgbox32.dragonflybsd.org:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/64bit/perl-5.14.0 -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_INT USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF
Built under dragonfly
Compiled at Jun 17 2011 01:01:15
%ENV:
PERL5LIB=":/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-0.56/blib/lib:/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-0.56/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="7846"
PERL5_CPANPLUS_IS_VERSION="0.9105"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/64bit/conf/perl-5.14.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-0.56/blib/lib
/usr/home/cpan/pit/64bit/conf/perl-5.14.0/.cpanplus/5.14.0/build/X11-Protocol-0.56/blib/arch
/usr/home/cpan/pit/64bit/perl-5.14.0/lib/site_perl/5.14.0/i386-dragonfly-64int
/usr/home/cpan/pit/64bit/perl-5.14.0/lib/site_perl/5.14.0
/usr/home/cpan/pit/64bit/perl-5.14.0/lib/5.14.0/i386-dragonfly-64int
/usr/home/cpan/pit/64bit/perl-5.14.0/lib/5.14.0
.