Plack-Middleware-ServerStatus-Lite v0.36 Perl 5 v5.28.2 i686-linux
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Plack-Middleware-ServerStatus-Lite v0.36
- Platform
- Perl 5 v5.28.2 i686-linux
- Date
- 2019-09-25 10:20:18
- ID
- 12e7fb98-df7e-11e9-9066-e374b0ba08e8
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Masahiro Nagano,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9178. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00_compile.t .............. ok
t/01_builder.t .............. ok
using Starman for test at t/02_server.t line 29.
2019/09/25-11:20:00 Starman::Server (type Net::Server::PreFork) starting! pid(22671)
Resolved [localhost]:38545 to [127.0.0.1]:38545, IPv4
Resolved [localhost]:38545 to [127.0.0.1]:38545, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:38545 with IPv4) - skipping
Binding to TCP port 38545 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:03 Server closing!
t/02_server.t ............... ok
using Starman for test at t/03_server_delayed_res.t line 29.
2019/09/25-11:20:03 Starman::Server (type Net::Server::PreFork) starting! pid(22681)
Resolved [localhost]:41795 to [127.0.0.1]:41795, IPv4
Resolved [localhost]:41795 to [127.0.0.1]:41795, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:41795 with IPv4) - skipping
Binding to TCP port 41795 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:07 Server closing!
using Starman for test at t/03_server_delayed_res.t line 89.
2019/09/25-11:20:07 Starman::Server (type Net::Server::PreFork) starting! pid(22690)
Resolved [localhost]:43573 to [127.0.0.1]:43573, IPv4
Resolved [localhost]:43573 to [127.0.0.1]:43573, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:43573 with IPv4) - skipping
Binding to TCP port 43573 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:10 Server closing!
t/03_server_delayed_res.t ... ok
using Starman for test at t/04_json.t line 31.
2019/09/25-11:20:10 Starman::Server (type Net::Server::PreFork) starting! pid(22700)
Resolved [localhost]:38555 to [127.0.0.1]:38555, IPv4
Resolved [localhost]:38555 to [127.0.0.1]:38555, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:38555 with IPv4) - skipping
Binding to TCP port 38555 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:13 Server closing!
t/04_json.t ................. ok
using Starman for test at t/05_counter.t line 31.
2019/09/25-11:20:13 Starman::Server (type Net::Server::PreFork) starting! pid(22710)
Resolved [localhost]:35977 to [127.0.0.1]:35977, IPv4
Resolved [localhost]:35977 to [127.0.0.1]:35977, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:35977 with IPv4) - skipping
Binding to TCP port 35977 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:13 Server closing!
t/05_counter.t .............. ok
using Starman for test at t/06_counter_delayed_res.t line 33.
2019/09/25-11:20:13 Starman::Server (type Net::Server::PreFork) starting! pid(22719)
Resolved [localhost]:43743 to [127.0.0.1]:43743, IPv4
Resolved [localhost]:43743 to [127.0.0.1]:43743, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:43743 with IPv4) - skipping
Binding to TCP port 43743 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:13 Server closing!
using Starman for test at t/06_counter_delayed_res.t line 95.
2019/09/25-11:20:13 Starman::Server (type Net::Server::PreFork) starting! pid(22727)
Resolved [localhost]:44343 to [127.0.0.1]:44343, IPv4
Resolved [localhost]:44343 to [127.0.0.1]:44343, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:44343 with IPv4) - skipping
Binding to TCP port 44343 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:13 Server closing!
t/06_counter_delayed_res.t .. ok
using Starman for test at t/07_skip_ps.t line 29.
2019/09/25-11:20:13 Starman::Server (type Net::Server::PreFork) starting! pid(22736)
Resolved [localhost]:33627 to [127.0.0.1]:33627, IPv4
Resolved [localhost]:33627 to [127.0.0.1]:33627, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:33627 with IPv4) - skipping
Binding to TCP port 33627 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:15 Server closing!
t/07_skip_ps.t .............. ok
2019/09/25-11:20:15 Starman::Server (type Net::Server::PreFork) starting! pid(22743)
Resolved [localhost]:45205 to [127.0.0.1]:45205, IPv4
Resolved [localhost]:45205 to [127.0.0.1]:45205, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:45205 with IPv4) - skipping
Binding to TCP port 45205 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/25-11:20:18 Server closing!
t/08_command.t .............. ok
All tests successful.
Files=9, Tests=86, 18 wallclock secs ( 0.04 usr 0.00 sys + 1.58 cusr 0.24 csys = 1.86 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
B 1.74 0
Capture::Tiny 0.48 0
Getopt::Long 2.5 2.38
JSON 4.02 2.53
LWP::UserAgent 6.39 0
Net::CIDR::Lite 0.21 0
Parallel::Scoreboard 0.08 0.03
Plack::Middleware 0 0
Pod::Usage 1.69 0
Starman 0.4015 0.3013
Test::More 1.302164 0
Test::SharedFork 0.35 0
Test::TCP 2.20 2.00
Try::Tiny 0.30 0.09
parent 0.236 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9178
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280231
ExtUtils::Command 7.36
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.36
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.39
File::Spec 3.75
Module::Build 0.4229
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302164
Test::Harness 3.42
Test::More 1.302164
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/nHRzVGKV6I/Plack-Middleware-ServerStatus-Lite-0.36/blib/script:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/FSgZeDNJjD/Starman-0.4015/blib/script:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/dsqxMsEsEm/lib/perl5:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/FSgZeDNJjD/Starman-0.4015/blib/lib:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/FSgZeDNJjD/Starman-0.4015/blib/arch:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/nHRzVGKV6I/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/nHRzVGKV6I/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 8819
PERL5_CPANPLUS_IS_VERSION = 0.9178
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.28.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/dsqxMsEsEm
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/dsqxMsEsEm"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/dsqxMsEsEm
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.28.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 28 subversion 2) configuration:
Platform:
osname=linux
osvers=4.19.0-5-686
archname=i686-linux
uname='linux dagobah 4.19.0-5-686 #1 smp debian 4.19.37-5+deb10u1 (2019-07-19) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.28.2'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=undef
use64bitall=undef
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='8.3.0'
gccosandvers=''
intsize=4
longsize=4
ptrsize=4
doublesize=8
byteorder=1234
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=12
longdblkind=3
ivtype='long'
ivsize=4
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=4
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/i686-linux-gnu/8/include-fixed /usr/include/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.28.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.28'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.64
Built under linux
Compiled at Aug 8 2019 12:37:22
%ENV:
PERL5LIB="/home/cpan/pit/jail/dsqxMsEsEm/lib/perl5:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/FSgZeDNJjD/Starman-0.4015/blib/lib:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/FSgZeDNJjD/Starman-0.4015/blib/arch:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/nHRzVGKV6I/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib:/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/nHRzVGKV6I/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="8819"
PERL5_CPANPLUS_IS_VERSION="0.9178"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.28.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/dsqxMsEsEm"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/dsqxMsEsEm""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/dsqxMsEsEm"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/dsqxMsEsEm/lib/perl5/5.28.2/i686-linux
/home/cpan/pit/jail/dsqxMsEsEm/lib/perl5/5.28.2
/home/cpan/pit/jail/dsqxMsEsEm/lib/perl5/i686-linux
/home/cpan/pit/jail/dsqxMsEsEm/lib/perl5
/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/FSgZeDNJjD/Starman-0.4015/blib/lib
/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/FSgZeDNJjD/Starman-0.4015/blib/arch
/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/nHRzVGKV6I/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib
/home/cpan/pit/bare/conf/perl-5.28.2/.cpanplus/5.28.2/build/nHRzVGKV6I/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch
/home/cpan/pit/bare/perl-5.28.2/lib/site_perl/5.28.2/i686-linux
/home/cpan/pit/bare/perl-5.28.2/lib/site_perl/5.28.2
/home/cpan/pit/bare/perl-5.28.2/lib/5.28.2/i686-linux
/home/cpan/pit/bare/perl-5.28.2/lib/5.28.2