Mojolicious-Plugin-PlackMiddleware v0.39 Perl 5 v5.28.0 i686-linux-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Mojolicious-Plugin-PlackMiddleware v0.39
- Platform
- Perl 5 v5.28.0 i686-linux-thread-multi
- Date
- 2021-03-19 03:20:40
- ID
- 14ec6d14-8862-11eb-84bc-edd243e66a77
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear JAMADAM,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9910. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.28.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t
t/00_load.t ............. ok
t/01_pertial.t .......... ok
t/02_basic.t ............ ok
t/03_basic2.t ........... ok
t/mws/error_document.t .. ok
t/mws/jsonp.t ........... ok
All tests successful.
Files=6, Tests=97, 2 wallclock secs ( 0.04 usr 0.00 sys + 1.54 cusr 0.14 csys = 1.72 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Mojolicious 9.10 8.65
Plack 1.0048 1.0031
Test::More 1.302183 0.47
Test::UseAllModules 0.17 0.10
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9910
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280235
ExtUtils::Command 7.58
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.58
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.39
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302183
Test::Harness 3.42
Test::More 1.302183
version 0.9928
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/Ebepxsjuja/lib/perl5:/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/2j1bQWPGn6/Mojolicious-Plugin-PlackMiddleware-0.39/blib/lib:/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/2j1bQWPGn6/Mojolicious-Plugin-PlackMiddleware-0.39/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 22934
PERL5_CPANPLUS_IS_VERSION = 0.9910
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.28.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/Ebepxsjuja
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/Ebepxsjuja"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/Ebepxsjuja
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.28.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 28 subversion 0) configuration:
Platform:
osname=linux
osvers=4.19.0-6-686
archname=i686-linux-thread-multi
uname='linux dagobah 4.19.0-6-686 #1 smp debian 4.19.67-2+deb10u2 (2019-11-11) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.28.0 -Dusethreads'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=undef
use64bitall=undef
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='8.3.0'
gccosandvers=''
intsize=4
longsize=4
ptrsize=4
doublesize=8
byteorder=1234
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=12
longdblkind=3
ivtype='long'
ivsize=4
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=4
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/i686-linux-gnu/8/include-fixed /usr/include/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.28.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.28'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.80
Built under linux
Compiled at Nov 29 2019 00:50:40
%ENV:
PERL5LIB="/home/cpan/pit/jail/Ebepxsjuja/lib/perl5:/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/2j1bQWPGn6/Mojolicious-Plugin-PlackMiddleware-0.39/blib/lib:/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/2j1bQWPGn6/Mojolicious-Plugin-PlackMiddleware-0.39/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="22934"
PERL5_CPANPLUS_IS_VERSION="0.9910"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.28.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/Ebepxsjuja"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/Ebepxsjuja""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/Ebepxsjuja"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/Ebepxsjuja/lib/perl5/5.28.0/i686-linux-thread-multi
/home/cpan/pit/jail/Ebepxsjuja/lib/perl5/5.28.0
/home/cpan/pit/jail/Ebepxsjuja/lib/perl5/i686-linux-thread-multi
/home/cpan/pit/jail/Ebepxsjuja/lib/perl5
/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/2j1bQWPGn6/Mojolicious-Plugin-PlackMiddleware-0.39/blib/lib
/home/cpan/pit/thr/conf/perl-5.28.0/.cpanplus/5.28.0/build/2j1bQWPGn6/Mojolicious-Plugin-PlackMiddleware-0.39/blib/arch
/home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0/i686-linux-thread-multi
/home/cpan/pit/thr/perl-5.28.0/lib/site_perl/5.28.0
/home/cpan/pit/thr/perl-5.28.0/lib/5.28.0/i686-linux-thread-multi
/home/cpan/pit/thr/perl-5.28.0/lib/5.28.0