Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: NA Device-WebIO-0.010 v5.8.9 GNU/Linux
Date: 2017-04-16T04:06:35Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Timm Murray,
This is a computer-generated report for Device-WebIO-0.010
on perl 5.8.9, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.9/89ad/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Perl v5.12.0 required--this is only v5.8.9, stopped at t/001_load.t line 25.
BEGIN failed--compilation aborted at t/001_load.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/001_load.t ....................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 14/14 subtests
t/002_pod.t ..................... ok
Perl v5.12.0 required--this is only v5.8.9, stopped at t/010_digital_input.t line 25.
BEGIN failed--compilation aborted at t/010_digital_input.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/010_digital_input.t ...........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests
Perl v5.12.0 required--this is only v5.8.9, stopped at t/020_digital_output.t line 25.
BEGIN failed--compilation aborted at t/020_digital_output.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/020_digital_output.t ..........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 13/13 subtests
Perl v5.12.0 required--this is only v5.8.9, stopped at t/030_adc_input.t line 25.
BEGIN failed--compilation aborted at t/030_adc_input.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/030_adc_input.t ...............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 20/20 subtests
Perl v5.12.0 required--this is only v5.8.9, stopped at t/040_pwm_output.t line 25.
BEGIN failed--compilation aborted at t/040_pwm_output.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/040_pwm_output.t ..............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 13/13 subtests
Perl v5.12.0 required--this is only v5.8.9, stopped at t/060_video_output.t line 25.
BEGIN failed--compilation aborted at t/060_video_output.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/060_video_output.t ............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 13/13 subtests
Perl v5.14.0 required--this is only v5.8.9, stopped at t/070_description.t line 25.
BEGIN failed--compilation aborted at t/070_description.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/070_description.t .............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
Perl v5.12.0 required--this is only v5.8.9, stopped at t/080_still_image_output.t line 25.
BEGIN failed--compilation aborted at t/080_still_image_output.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/080_still_image_output.t ......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/9 subtests
Perl v5.14.0 required--this is only v5.8.9, stopped at t/090_i2c.t line 25.
BEGIN failed--compilation aborted at t/090_i2c.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/090_i2c.t .....................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
Perl v5.14.0 required--this is only v5.8.9, stopped at t/100_temp_sensors.t line 25.
BEGIN failed--compilation aborted at t/100_temp_sensors.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/100_temp_sensors.t ............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/6 subtests
Perl v5.12.0 required--this is only v5.8.9, stopped at t/110_digital_input_callback.t line 25.
BEGIN failed--compilation aborted at t/110_digital_input_callback.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/110_digital_input_callback.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/16 subtests
Perl v5.12.0 required--this is only v5.8.9, stopped at t/120_video_output_callback.t line 25.
BEGIN failed--compilation aborted at t/120_video_output_callback.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/120_video_output_callback.t ...
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/5 subtests
Perl v5.14.0 required--this is only v5.8.9, stopped at t/130_spi.t line 25.
BEGIN failed--compilation aborted at t/130_spi.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/130_spi.t .....................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
Perl v5.12.0 required--this is only v5.8.9, stopped at t/200_two_types_one_obj.t line 25.
BEGIN failed--compilation aborted at t/200_two_types_one_obj.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/200_two_types_one_obj.t .......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests
Test Summary Report
-------------------
t/001_load.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 14 tests but ran 0.
t/010_digital_input.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 12 tests but ran 0.
t/020_digital_output.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/030_adc_input.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 20 tests but ran 0.
t/040_pwm_output.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/060_video_output.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/070_description.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 0.
t/080_still_image_output.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/090_i2c.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/100_temp_sensors.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 6 tests but ran 0.
t/110_digital_input_callback.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 16 tests but ran 0.
t/120_video_output_callback.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 5 tests but ran 0.
t/130_spi.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 0.
t/200_two_types_one_obj.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 12 tests but ran 0.
Files=15, Tests=17, 2 wallclock secs ( 0.04 usr 0.08 sys + 0.48 cusr 0.10 csys = 0.70 CPU)
Result: FAIL
Failed 14/15 test programs. 0/17 subtests failed.
Makefile:906: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Exception::Tiny 0 0.2.1
Moo 0 2.003002
namespace::clean 0 0.27
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.24
Test::Pod 0 1.51
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 11078
PERL5_CPAN_IS_RUNNING = 11078
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.9/89ad/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.18
CPAN::Meta 2.150010
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.24
ExtUtils::Install 1.54
ExtUtils::MakeMaker 7.24
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
JSON 2.90
JSON::PP 2.27400
Module::Build 0.4222
Module::Signature 0.81
Parse::CPAN::Meta 2.150010
Test::Harness 3.39
Test::More 1.302078
YAML 1.23
YAML::Syck 1.29
version 0.9917
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=4.9.0-2-amd64, archname=x86_64-linux
uname='linux k93msid 4.9.0-2-amd64 #1 smp debian 4.9.18-1 (2017-03-30) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.9/89ad -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Uuselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='6.3.0 20170406', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.24'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at Apr 14 2017 14:37:34
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="11078"
PERL5_CPAN_IS_RUNNING="11078"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.9/89ad/lib/5.8.9/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.9/89ad/lib/5.8.9
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.9/89ad/lib/site_perl/5.8.9/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.9/89ad/lib/site_perl/5.8.9
.