SortSpec v0.1.0 Perl 5 v5.22.2 i86pc-solaris-thread-multi-64
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
SortSpec v0.1.0
- Platform
- Perl 5 v5.22.2 i86pc-solaris-thread-multi-64
- Date
- 2024-04-16 08:41:18
- ID
- 17e84d08-fbcd-11ee-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear PERLANCAR,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.22.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ........... ok
t/author-critic.t ........ skipped: these tests are for testing by the author
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
All tests successful.
Files=4, Tests=1, 1 wallclock secs ( 0.05 usr 0.02 sys + 0.20 cusr 0.08 csys = 0.36 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.70 0
File::Spec 3.75 0
IO::Handle 1.35 0
IPC::Open3 1.18 0
Test::More 1.302198 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.75
Module::Build 0.4234
Pod::Parser 1.63
Pod::Simple 3.29
Test2 1.302198
Test::Harness 3.48
Test::More 1.302198
version 0.9930
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/jail/7Ad60k4H_J/bin:/usr/bin:/usr/sbin:/sbin:/opt/ooce/bin:/usr/gnu/bin
PERL5LIB = /home/cpan/pit/jail/7Ad60k4H_J/lib/perl5:/home/cpan/pit/thr/conf/perl-5.22.2/.cpanplus/5.22.2/build/0MYyukVyNl/SortSpec-0.1.0/blib/lib:/home/cpan/pit/thr/conf/perl-5.22.2/.cpanplus/5.22.2/build/0MYyukVyNl/SortSpec-0.1.0/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 9319
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.22.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/7Ad60k4H_J
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/7Ad60k4H_J"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/7Ad60k4H_J
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.22.2/bin/perl
UID: $< = 101
EUID: $> = 101
GID: $( = 101 101
EGID: $) = 101 101
-------------------------------
--
Summary of my perl5 (revision 5 version 22 subversion 2) configuration:
Platform:
osname=solaris, osvers=2.11, archname=i86pc-solaris-thread-multi-64
uname='sunos ouzel 5.11 omnios-r151034-0d278a0cc5 i86pc i386 i86pc '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.22.2 -Dusethreads -Duse64bitall -Dcc=gcc'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -m64 -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -DPERL_USE_SAFE_PUTENV',
optimize='-O',
cppflags='-D_REENTRANT -m64 -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong'
ccversion='', gccversion='9.3.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -m64 -fstack-protector-strong -L/usr/gnu/lib '
libpth=/opt/gcc-9/lib /opt/gcc-9/lib/gcc/x86_64-pc-solaris2.11/9.3.0/include-fixed /usr/lib /usr/gnu/lib /usr/ccs/lib
libs=-lpthread -lsocket -lnsl -ldl -lm -lc
perllibs=-lpthread -lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /home/cpan/pit/thr/perl-5.22.2/lib/5.22.2/i86pc-solaris-thread-multi-64/CORE'
cccdlflags='-fPIC', lddlflags=' -shared -m64 -L/usr/gnu/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
PERL_USE_SAFE_PUTENV USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.00
Built under solaris
Compiled at Aug 20 2020 07:33:45
%ENV:
PERL5LIB="/home/cpan/pit/jail/7Ad60k4H_J/lib/perl5:/home/cpan/pit/thr/conf/perl-5.22.2/.cpanplus/5.22.2/build/0MYyukVyNl/SortSpec-0.1.0/blib/lib:/home/cpan/pit/thr/conf/perl-5.22.2/.cpanplus/5.22.2/build/0MYyukVyNl/SortSpec-0.1.0/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="9319"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.22.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/7Ad60k4H_J"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/7Ad60k4H_J""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/7Ad60k4H_J"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/7Ad60k4H_J/lib/perl5/5.22.2/i86pc-solaris-thread-multi-64
/home/cpan/pit/jail/7Ad60k4H_J/lib/perl5/5.22.2
/home/cpan/pit/jail/7Ad60k4H_J/lib/perl5/i86pc-solaris-thread-multi-64
/home/cpan/pit/jail/7Ad60k4H_J/lib/perl5
/home/cpan/pit/thr/conf/perl-5.22.2/.cpanplus/5.22.2/build/0MYyukVyNl/SortSpec-0.1.0/blib/lib
/home/cpan/pit/thr/conf/perl-5.22.2/.cpanplus/5.22.2/build/0MYyukVyNl/SortSpec-0.1.0/blib/arch
/home/cpan/pit/thr/perl-5.22.2/lib/site_perl/5.22.2/i86pc-solaris-thread-multi-64
/home/cpan/pit/thr/perl-5.22.2/lib/site_perl/5.22.2
/home/cpan/pit/thr/perl-5.22.2/lib/5.22.2/i86pc-solaris-thread-multi-64
/home/cpan/pit/thr/perl-5.22.2/lib/5.22.2
.