Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Acme-stickpin-0.02_02 v5.10.0 FreeBSD
Date: 2012-06-17T16:04:26Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear STICKPIN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9130. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /usr/home/cpan/pit/thr/perl-5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Bailout called. Further testing stopped:
*** Error code 1
Stop in /usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02.
# Failed test 'use Acme::stickpin;'
# at t/00-load.t line 6.
# Tried to use 'Acme::stickpin'.
# Error: Perl v5.100.0 required (did you mean v5.10.0?)--this is only v5.10.0, stopped at /usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02/blib/lib/Acme/stickpin.pm line 3.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02/blib/lib/Acme/stickpin.pm line 3.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Testing Acme::stickpin , Perl 5.010000, /usr/home/cpan/pit/thr/perl-5.10.0/bin/perl
# Looks like you failed 1 test of 1.
FAILED--Further testing stopped.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.62 0
Test::More 0.98 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9130
CPANPLUS::Dist::Build 0.62
Cwd 3.33
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.15
File::Spec 3.33
Module::Build 0.40
Test::Harness 3.25
Test::More 0.98
version 0.99
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.80.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 9854
PERL5_CPANPLUS_IS_VERSION = 0.9130
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.10.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr/perl-5.10.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002 1002
EGID: $) = 1002 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=freebsd, osvers=7.4-release, archname=amd64-freebsd-thread-multi
uname='freebsd falco.bingosnet.co.uk 7.4-release freebsd 7.4-release #0: fri feb 18 01:55:22 utc 2011 root@driscoll.cse.buffalo.edu:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.10.0 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt
perllibs=-lm -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API
Built under freebsd
Compiled at Aug 12 2011 20:59:12
%ENV:
PERL5LIB=":/usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="9854"
PERL5_CPANPLUS_IS_VERSION="0.9130"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.10.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-stickpin-0.02_02/blib/arch
/usr/home/cpan/pit/thr/perl-5.10.0/lib/5.10.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.10.0/lib/5.10.0
/usr/home/cpan/pit/thr/perl-5.10.0/lib/site_perl/5.10.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.10.0/lib/site_perl/5.10.0
.