DBIx-Introspector v0.001005 Perl 5 v5.18.0 amd64-freebsd-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
DBIx-Introspector v0.001005
- Platform
- Perl 5 v5.18.0 amd64-freebsd-thread-multi
- Date
- 2019-03-22 11:24:54
- ID
- 1e057860-4c95-11e9-9066-e374b0ba08e8
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Arthur Axel 'fREW' Schmidt,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9176. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/thr/perl-5.18.0/bin/perl5.18.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/basic.t ............... ok
t/dsn.t ................. ok
t/eg.t .................. ok
t/fresh.t ............... ok
t/release-pod-syntax.t .. skipped: these tests are for release candidate testing
All tests successful.
Files=5, Tests=17, 1 wallclock secs ( 0.05 usr 0.02 sys + 0.68 cusr 0.28 csys = 1.02 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
DBD::SQLite 1.62 1.4
DBI 1.642 1.628
ExtUtils::MakeMaker 7.34 0
Moo 2.003004 1.003001
Test::More 1.302162 0.99
Test::Roo 1.004 1.002
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9176
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.34
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.71
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4224
Pod::Parser 1.60
Pod::Simple 3.28
Test2 1.302162
Test::Harness 3.42
Test::More 1.302162
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.06.
Powered by minismokebox version 0.68
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/9U8urfDyJa/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/HM1qj2s1of/DBIx-Introspector-0.001005/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/HM1qj2s1of/DBIx-Introspector-0.001005/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 41624
PERL5_CPANPLUS_IS_VERSION = 0.9176
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.18.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/9U8urfDyJa
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/9U8urfDyJa"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/9U8urfDyJa
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr/perl-5.18.0/bin/perl5.18.0
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 0) configuration:
Platform:
osname=freebsd, osvers=12.0-release, archname=amd64-freebsd-thread-multi
uname='freebsd fforc 12.0-release freebsd 12.0-release r341666 generic amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.18.0 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 6.0.1 (tags/RELEASE_601/final 335540)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil
perllibs=-ldl -lm -lcrypt -lutil
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.52
Built under freebsd
Compiled at Dec 21 2018 14:43:24
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/9U8urfDyJa/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/HM1qj2s1of/DBIx-Introspector-0.001005/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/HM1qj2s1of/DBIx-Introspector-0.001005/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="41624"
PERL5_CPANPLUS_IS_VERSION="0.9176"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.18.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/9U8urfDyJa"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/9U8urfDyJa""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/9U8urfDyJa"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/usr/home/cpan/pit/jail/9U8urfDyJa/lib/perl5/5.18.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/jail/9U8urfDyJa/lib/perl5/5.18.0
/usr/home/cpan/pit/jail/9U8urfDyJa/lib/perl5/amd64-freebsd-thread-multi
/usr/home/cpan/pit/jail/9U8urfDyJa/lib/perl5
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/HM1qj2s1of/DBIx-Introspector-0.001005/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/HM1qj2s1of/DBIx-Introspector-0.001005/blib/arch
/usr/home/cpan/pit/thr/perl-5.18.0/lib/site_perl/5.18.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.18.0/lib/site_perl/5.18.0
/usr/home/cpan/pit/thr/perl-5.18.0/lib/5.18.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.18.0/lib/5.18.0
.