Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL PerlIO-via-Skip-0.06 v5.12.3 FreeBSD
Date: 2011-08-30T01:26:42Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear IOANNIS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9109. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Aug 30 02:26:35 2011] Using cached file '/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/authors/id/I/IO/IOANNIS/CHECKSUMS' on disk; ttl (3600s) is not exceeded
[MSG] [Tue Aug 30 02:26:35 2011] Checksum matches for 'PerlIO-via-Skip-0.06.tar.gz'
[MSG] [Tue Aug 30 02:26:35 2011] Extracted 'PerlIO::via::Skip' to '/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/PerlIO-via-Skip-0.06'
[MSG] [Tue Aug 30 02:26:35 2011] CPANPLUS is prefering Build.PL
[MSG] [Tue Aug 30 02:26:35 2011] Loading YACSmoke database "/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/cpansmoke.dat"
[MSG] [Tue Aug 30 02:26:35 2011] Checking prerequisites...
recommends:
* Test::CPAN::Meta is not installed
* Test::Dependencies is not installed
* Test::Distribution is not installed
* Test::Exception is not installed
* Test::HasVersion is not installed
* Test::MinimumVersion is not installed
* Test::Pod is not installed
* Test::Pod::Coverage is not installed
* Test::Spelling is not installed
* Test::Strict is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'PerlIO-via-Skip' version '0.06'
[MSG] [Tue Aug 30 02:26:35 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Aug 30 02:26:35 2011] Checking for previous PASS result for "PerlIO-via-Skip-0.06"
[MSG] [Tue Aug 30 02:26:36 2011] Building PerlIO-via-Skip
[ERROR] [Tue Aug 30 02:26:38 2011] MAKE TEST failed:
t/00_load.t ............ ok
# Tests were run but no plan was declared and done_testing() was not seen.
t/01b_pod.t ............
All 1 subtests passed
(less 1 skipped subtest: 0 okay)
# Tests were run but no plan was declared and done_testing() was not seen.
t/01c_coverage.t .......
All 1 subtests passed
(less 1 skipped subtest: 0 okay)
t/01s_spelling.t ....... ok
t/02_hasversion.t ...... ok
t/03_meta.t ............ ok
t/05_minimumversion.t .. ok
t/07_strict.t .......... ok
t/binmode.t ............ ok
t/config.t ............. ok
t/dot.t ................ ok
t/main.t ............... ok
t/mode.t ............... ok
t/r01_general.t ........ ok
# Failed test at t/r02_eol.t line 25.
# got: 'an b _ for _ and_'
# expected: 'an b _ for _'
# Failed test at t/r02_eol.t line 26.
# got: 'an b _ for _ and_
# melon __ done _'
# expected: 'an b _ for _'
# Looks like you failed 2 tests of 10.
t/r02_eol.t ............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/10 subtests
t/r03_after.t .......... ok
t/r04_maxlines.t ....... ok
t/r05_patterns.t ....... ok
t/r06_blanklines.t ..... ok
t/r07_comments.t ....... ok
perl: (malloc) /usr/src/lib/libc/stdlib/malloc.c:2629: Failed assertion: "diff == regind * size"
t/rr01_general.t .......
All 1 subtests passed
# Failed test at t/rw01_general.t line 21.
# got: 'apple_orange_melon'
# expected: 'orange__'
# Looks like you failed 1 test of 4.
t/rw01_general.t .......
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
t/w01_general.t ........ ok
t/w02a_eol.t ........... ok
t/w02b_eol.t ........... ok
t/w03_after.t .......... ok
t/w04_maxlines.t ....... ok
t/w05_patterns.t ....... ok
t/w06_blanklines.t ..... ok
t/w07_comments.t ....... ok
Test Summary Report
-------------------
t/01b_pod.t (Wstat: 0 Tests: 1 Failed: 0)
Parse errors: No plan found in TAP output
t/01c_coverage.t (Wstat: 0 Tests: 1 Failed: 0)
Parse errors: No plan found in TAP output
t/r02_eol.t (Wstat: 512 Tests: 10 Failed: 2)
Failed tests: 9-10
Non-zero exit status: 2
t/rr01_general.t (Wstat: 134 Tests: 1 Failed: 0)
Non-zero wait status: 134
Parse errors: No plan found in TAP output
t/rw01_general.t (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=30, Tests=126, 2 wallclock secs ( 0.14 usr 0.18 sys + 1.00 cusr 0.62 csys = 1.95 CPU)
Result: FAIL
Failed 5/30 test programs. 3/126 subtests failed.
BEGIN failed--compilation aborted at /usr/home/cpan/pit/thr/perl-5.12.3/bin/cpanp-run-perl line 8.
[MSG] [Tue Aug 30 02:26:38 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9109
CPANPLUS::Dist::Build 0.56
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.59
ExtUtils::Manifest 1.59
ExtUtils::ParseXS 3.02
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.93
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.64.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/PerlIO-via-Skip-0.06/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/PerlIO-via-Skip-0.06/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 6863
PERL5_CPANPLUS_IS_VERSION = 0.9109
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.12.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr/perl-5.12.3/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 3) configuration:
Platform:
osname=freebsd, osvers=9.0-beta1, archname=amd64-freebsd-thread-multi
uname='freebsd filthpig 9.0-beta1 freebsd 9.0-beta1 #0: thu jul 28 17:15:31 utc 2011 root@farrell.cse.buffalo.edu:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.12.3 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.2 20070831 prerelease [FreeBSD]', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt
perllibs=-lm -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Built under freebsd
Compiled at Aug 9 2011 17:54:56
%ENV:
PERL5LIB=":/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/PerlIO-via-Skip-0.06/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/PerlIO-via-Skip-0.06/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="6863"
PERL5_CPANPLUS_IS_VERSION="0.9109"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.12.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/PerlIO-via-Skip-0.06/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/PerlIO-via-Skip-0.06/blib/arch
/usr/home/cpan/pit/thr/perl-5.12.3/lib/site_perl/5.12.3/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.12.3/lib/site_perl/5.12.3
/usr/home/cpan/pit/thr/perl-5.12.3/lib/5.12.3/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.12.3/lib/5.12.3
.