Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: NA Irssi-Script-InfoParser-0.004-TRIAL v5.8.5 GNU/Linux
Date: 2011-05-30T01:14:09Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Tom Feist,
This is a computer-generated report for Irssi-Script-InfoParser-0.004-TRIAL
on perl 5.8.5, created by CPAN-Reporter-1.1902.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.5/ba65/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Irssi::Script::InfoParser;'
# at t/001-load.t line 3.
# Tried to use 'Irssi::Script::InfoParser'.
# Error: Perl v5.12.0 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Looks like you failed 1 test of 1.
t/001-load.t ..........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Perl v5.12.0 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
Compilation failed in require at t/002-new.t line 5.
BEGIN failed--compilation aborted at t/002-new.t line 5.
# Looks like your test exited with 255 before it could output anything.
t/002-new.t ...........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/7 subtests
Perl v5.12.0 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
Compilation failed in require at t/003-versions.t line 12.
BEGIN failed--compilation aborted at t/003-versions.t line 12.
t/003-versions.t ......
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Perl v5.12.0 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
Compilation failed in require at t/004-irssi.t line 14.
BEGIN failed--compilation aborted at t/004-irssi.t line 14.
t/004-irssi.t .........
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Perl v5.12.0 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
Compilation failed in require at t/005-real-scripts.t line 14.
BEGIN failed--compilation aborted at t/005-real-scripts.t line 14.
t/005-real-scripts.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Perl v5.12.0 required--this is only v5.8.5, stopped at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/Irssi-Script-InfoParser-0.004-Nup3Q_/blib/lib/Irssi/Script/InfoParser.pm line 6.
Compilation failed in require at t/006-synopsis.t line 14.
BEGIN failed--compilation aborted at t/006-synopsis.t line 14.
t/006-synopsis.t ......
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/author-critic.t ..... skipped: these tests are for testing by the author
Test Summary Report
-------------------
t/001-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/002-new.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 0.
t/003-versions.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/004-irssi.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/005-real-scripts.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/006-synopsis.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=7, Tests=1, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.26 cusr 0.08 csys = 0.39 CPU)
Result: FAIL
Failed 6/7 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------------- ---- ------
ExtUtils::MakeMaker 0 6.56
Log::Any 0 0.12
Moose 0 2.0007
namespace::autoclean 0 0.12
PPI 0 1.215
PPI::Document 0 1.215
PPI::Dumper 0 1.215
build_requires:
Module Need Have
-------------------- ---- ------
Log::Any::Test 0 0.12
Test::Differences 0 0.61
Test::Exception 0 0.31
Test::More 0 0.98
YAML::Any 0 0.72
configure_requires:
Module Need Have
-------------------- ---- ------
ExtUtils::MakeMaker 6.31 6.56
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 31674
PERL5_CPAN_IS_RUNNING = 31674
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.5/ba65/bin/perl
$UID/$EUID = 1001 / 1001
$GID = 1001 1001
$EGID = 1001 1001
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9600
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.17
ExtUtils::Install 1.52
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Module::Signature 0.68
Test::Harness 3.23
Test::More 0.98
YAML 0.73
YAML::Syck 1.17
version 0.88
--
Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
Platform:
osname=linux, osvers=2.6.32-5-amd64, archname=x86_64-linux-thread-multi
uname='linux k81 2.6.32-5-amd64 #1 smp mon mar 7 21:35:22 utc 2011 x86_64 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/perl-5.8.5/ba65 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duseithreads -Uuselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.11.2.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.2'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS USE_64_BIT_INT USE_64_BIT_ALL USE_LARGE_FILES PERL_IMPLICIT_CONTEXT
Locally applied patches:
MAINT23136
Built under linux
Compiled at May 7 2011 14:04:26
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="31674"
PERL5_CPAN_IS_RUNNING="31674"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.5/ba65/lib/5.8.5/x86_64-linux-thread-multi
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.5/ba65/lib/5.8.5
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.5/ba65/lib/site_perl/5.8.5/x86_64-linux-thread-multi
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.5/ba65/lib/site_perl/5.8.5
/home/src/perl/repoperls/installed-perls/perl/perl-5.8.5/ba65/lib/site_perl
.