Sys-Filesystem-MountPoint v1.02 Perl 5 v5.31.5 x86_64-linux-thread-multi
- Status
- Pass
- From
- Andreas J. König (ANDK)
- Dist
-
Sys-Filesystem-MountPoint v1.02
- Platform
- Perl 5 v5.31.5 x86_64-linux-thread-multi
- Date
- 2019-10-22 07:18:40
- ID
- 2c47f11e-f49c-11e9-81b2-8e4834af9b2c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Leo Charre,
This is a computer-generated report for Sys-Filesystem-MountPoint-1.02
on perl 5.31.5, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/tmp/basesmoker-reloperl-SEz7/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
===================
= PART 0 INTERNAL CHECK
==================
===================
= PART 1 PATHS THAT ARE GOOD
==================
Path: ./MYMETA.yml
Path: ./Makefile
Path: ./MANIFEST
Path: ./bin/mounpointq
Path: ./blib/bin/.exists
Path: ./blib/man1/.exists
Path: ./blib/arch/auto/Sys/Filesystem/MountPoint/.exists
Path: ./blib/arch/.exists
Path: ./blib/script/mounpointq
Path: ./blib/script/.exists
Path: ./blib/man3/Sys::Filesystem::MountPoint.3
Path: ./blib/man3/.exists
Path: ./blib/lib/auto/Sys/Filesystem/MountPoint/.exists
Path: ./blib/lib/Sys/Filesystem/MountPoint.pm
Path: ./blib/lib/Sys/Filesystem/.exists
Path: ./pm_to_blib
Path: ./MYMETA.json
Path: ./Makefile.PL
Path: ./META.yml
Path: ./lib/Sys/Filesystem/MountPoint.pm
Path: ./t/00.t
===================
= PART 2 BOGUS PATHS
==================
Bogus path: 1571728704/sadkhakjsdhfakjsdhgjahgh4a3h4gh
Bogus path: awdfhahh348gh3g/asdgasga/asdgasdg1571728704
===================
= PART 3 DEV TO MOUNT POINT
==================
/dev/snd:0,/dev/vhost-vsock:0,/dev/vhost-net:0,/dev/vfio:0,/dev/btrfs-control:0,/dev/cuse:0,/dev/vcsa6:0,/dev/vcs6:0,/dev/vcsa5:0,/dev/vcs5:0,/dev/vcsa4:0,/dev/vcs4:0,/dev/vcsa3:0,/dev/vcs3:0,/dev/vcsa2:0,/dev/vcs2:0,/dev/initctl:0,/dev/log:0,/dev/mqueue:0,/dev/shm:0,/dev/autofs:0,/dev/disk:0,/dev/block:0,/dev/char:0,/dev/stderr:0,/dev/stdout:0,/dev/stdin:0,/dev/fd:0,/dev/core:0,/dev/pts:0,/dev/memory_bandwidth:0,/dev/network_throughput:0,/dev/network_latency:0,/dev/cpu_dma_latency:0,/dev/mcelog:0,/dev/mapper:0,/dev/uinput:0,/dev/psaux:0,/dev/input:0,
found mount point for /dev/xvda1: 'none'
found mount point for /dev/xvda2: '/'
/dev/ppp:0,/dev/net:0,/dev/loop7:0,/dev/loop6:0,/dev/loop5:0,/dev/loop4:0,/dev/loop3:0,/dev/loop2:0,/dev/loop1:0,/dev/loop0:0,/dev/loop-control:0,/dev/lightnvm:0,/dev/hwrng:0,/dev/ttyprintk:0,/dev/ttyS31:0,/dev/ttyS30:0,/dev/ttyS29:0,/dev/ttyS28:0,/dev/ttyS27:0,/dev/ttyS26:0,/dev/ttyS25:0,/dev/ttyS24:0,/dev/ttyS23:0,/dev/ttyS22:0,/dev/ttyS21:0,/dev/ttyS20:0,/dev/ttyS19:0,/dev/ttyS18:0,/dev/ttyS17:0,/dev/ttyS16:0,/dev/ttyS15:0,/dev/ttyS14:0,/dev/ttyS13:0,/dev/ttyS12:0,/dev/ttyS11:0,/dev/ttyS10:0,/dev/ttyS9:0,/dev/ttyS8:0,/dev/ttyS7:0,/dev/ttyS6:0,/dev/ttyS5:0,/dev/ttyS4:0,/dev/ttyS3:0,/dev/ttyS2:0,/dev/ttyS1:0,/dev/ttyS0:0,/dev/hvc7:0,/dev/hvc6:0,/dev/hvc5:0,/dev/hvc4:0,/dev/hvc3:0,/dev/hvc2:0,/dev/hvc1:0,/dev/hvc0:0,/dev/ptmx:0,/dev/xen:0,/dev/fuse:0,/dev/ecryptfs:0,/dev/snapshot:0,/dev/tty63:0,/dev/tty62:0,/dev/tty61:0,/dev/tty60:0,/dev/tty59:0,/dev/tty58:0,/dev/tty57:0,/dev/tty56:0,/dev/tty55:0,/dev/tty54:0,/dev/tty53:0,/dev/tty52:0,/dev/tty51:0,/dev/tty50:0,/dev/tty49:0,/dev/tty48:0,/dev/tty47:0,/dev/tty46:0,/dev/tty45:0,/dev/tty44:0,/dev/tty43:0,/dev/tty42:0,/dev/tty41:0,/dev/tty40:0,/dev/tty39:0,/dev/tty38:0,/dev/tty37:0,/dev/tty36:0,/dev/tty35:0,/dev/tty34:0,/dev/tty33:0,/dev/tty32:0,/dev/tty31:0,/dev/tty30:0,/dev/tty29:0,/dev/tty28:0,/dev/tty27:0,/dev/tty26:0,/dev/tty25:0,/dev/tty24:0,/dev/tty23:0,/dev/tty22:0,/dev/tty21:0,/dev/tty20:0,/dev/tty19:0,/dev/tty18:0,/dev/tty17:0,/dev/tty16:0,/dev/tty15:0,/dev/tty14:0,/dev/tty13:0,/dev/tty12:0,/dev/tty11:0,/dev/tty10:0,/dev/tty9:0,/dev/tty8:0,/dev/tty7:0,/dev/tty6:0,/dev/tty5:0,/dev/tty4:0,/dev/tty3:0,/dev/tty2:0,/dev/tty1:0,/dev/vcsa1:0,/dev/vcs1:0,/dev/vcsa:0,/dev/vcs:0,/dev/tty0:0,/dev/console:0,/dev/tty:0,/dev/kmsg:0,/dev/urandom:0,/dev/random:0,/dev/full:0,/dev/zero:0,/dev/port:0,/dev/null:0,/dev/mem:0,/dev/rfkill:0,/dev/vga_arbiter:0,
===================
= PART 4 DEV AND PATH ARGS TO MOUNT POINT
==================
t/00.t .. ok
All tests successful.
Files=1, Tests=50, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.09 cusr 0.03 csys = 0.15 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Carp 1 1.50
Cwd 3 3.78
Exporter 5 5.74
Getopt::Std::Strict 1.01 1.01
Sys::Filesystem 1.22 1.406
Test::Simple 0 1.302168
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.38
configure_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.38
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/local/sbin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/local/perl/bin:/usr/X11/bin
PERL = /tmp/basesmoker-reloperl-SEz7/bin/perl
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 23096
PERL5_CPAN_IS_RUNNING = 23096
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-SEz7/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.27
CPAN::Meta 2.150010
Cwd 3.78
ExtUtils::CBuilder 0.280233
ExtUtils::Command 7.38
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.38
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.40
File::Spec 3.78
JSON 4.02
JSON::PP 4.04
Module::Build 0.4229
Module::Signature 0.83
Parse::CPAN::Meta 2.150010
Test::Harness 3.42
Test::More 1.302168
YAML 1.29
YAML::Syck 1.31
version 0.9924
--
Summary of my perl5 (revision 5 version 31 subversion 5) configuration:
Commit id: 855bce9a38fe83707e88a27f961aa4a070555df7
Platform:
osname=linux
osvers=4.15.0-65-generic
archname=x86_64-linux-thread-multi
uname='linux k93bionic 4.15.0-65-generic #74-ubuntu smp tue sep 17 17:06:04 utc 2019 x86_64 x86_64 x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93bionic/v5.31.5/7ee9 -Dmyhostname=k93bionic -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Duseithreads -Uuselongdouble -DEBUGGING=-g'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2 -g'
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='7.4.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.27.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.27'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under linux
Compiled at Oct 21 2019 04:39:29
%ENV:
PERL="/tmp/basesmoker-reloperl-SEz7/bin/perl"
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="23096"
PERL5_CPAN_IS_RUNNING="23096"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93bionic/v5.31.5/7ee9/lib/site_perl/5.31.5/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/host/k93bionic/v5.31.5/7ee9/lib/site_perl/5.31.5
/home/sand/src/perl/repoperls/installed-perls/host/k93bionic/v5.31.5/7ee9/lib/5.31.5/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/host/k93bionic/v5.31.5/7ee9/lib/5.31.5
.