App-Cme v1.034 Perl 5 v5.20.0 amd64-freebsd
- Status
- Na
- From
- Chris Williams (BINGOS)
- Dist
-
App-Cme v1.034
- Platform
- Perl 5 v5.20.0 amd64-freebsd
- Date
- 2022-01-08 01:49:10
- ID
- 2ca333ba-7025-11ec-bc66-57723b537541
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Dominique Dumont,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Array found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 114, at end of line
(Missing operator before ?)
"my" variable $var masks earlier declaration in same scope at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 120.
Array found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 247, at end of line
(Missing operator before ?)
Array found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 277, at end of line
# No tests run!
# Failed test 'No tests run for subtest "list command"'
# at t/cme-command.t line 59.
syntax error at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 114, near "->@*"
syntax error at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 141, near "->%"
syntax error at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 247, near "->@*"
syntax error at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 252, near "->%"
Global symbol "@missing" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 253.
Global symbol "@missing" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 254.
syntax error at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 254, near "@missing)"
Global symbol "$self" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 257.
Global symbol "$opt" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 257.
Global symbol "$app_args" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 257.
Global symbol "$opt" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 261.
Global symbol "$commit_msg" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 262.
Global symbol "$opt" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 262.
Global symbol "$commit_msg" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 266.
Global symbol "$opt" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 273.
Global symbol "$opt" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 273.
Global symbol "$self" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 276.
Global symbol "$opt" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 276.
Global symbol "$app_args" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 276.
Global symbol "$script_data" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm line 277.
/usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib/App/Cme/Command/run.pm has too many errors.
Compilation failed in require at /usr/home/cpan/pit/jail/prPV2BpBIS/lib/perl5/Sub/Exporter/Util.pm line 57.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 1.
t/cme-command.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
t/perl-critic.t .. skipped: Author test. Set $ENV{TEST_AUTHOR} to a true value to run.
t/pod.t .......... skipped: these tests are for testing by the author
Test Summary Report
-------------------
t/cme-command.t (Wstat: 512 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=3, Tests=1, 1 wallclock secs ( 0.05 usr 0.00 sys + 0.73 cusr 0.27 csys = 1.05 CPU)
Result: FAIL
Failed 1/3 test programs. 1/1 subtests failed.
[MSG] [Sat Jan 8 01:49:09 2022] 'App::Cme' is a platform specific module, and the test results on your platform are not relevant --sending N/A grade.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
App::Cmd::Setup 0.334 0
App::Cmd::Tester 0.334 0
Config::Model 2.147 2.124
Config::Model::FuseUI 2.147 0
Config::Model::Lister 2.147 0
Config::Model::ObjTreeScanner 2.147 0
Config::Model::SimpleUI 2.147 0
Config::Model::TermUI 2.147 0
Config::Model::Utils::GenClassPod 2.147 0
Data::Dumper 2.151 0
Encode 2.60 0
English 1.09 0
File::HomeDir 1.006 0
File::Spec 3.75 0
JSON 4.04 0
Log::Log4perl 1.54 0
Module::Build 0.4231 0.34
Path::Tiny 0.120 0
Pod::POM 2.01 0
Pod::POM::View::Text 2.01 0
Scalar::Util 1.38 0
Term::ANSIColor 4.02 2.01
Test::File::Contents 0.23 0
Test::More 1.302188 0
Test::Perl::Critic 1.04 0
Test::Pod 1.52 1.00
Tie::Hash 1.05 0
YAML 1.30 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.62
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.62
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.62
Pod::Simple 3.28
Test2 1.302188
Test::Harness 3.42
Test::More 1.302188
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/script:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/prPV2BpBIS/lib/perl5:/usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 23062
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.20.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/prPV2BpBIS
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/prPV2BpBIS"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/prPV2BpBIS
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.20.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 20 subversion 0) configuration:
Platform:
osname=freebsd, osvers=12.3-release, archname=amd64-freebsd
uname='freebsd fforc 12.3-release freebsd 12.3-release r371126 generic amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.20.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='FreeBSD Clang 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib /usr/lib/clang/10.0.1/lib /usr/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 2.08
Built under freebsd
Compiled at Dec 8 2021 10:58:32
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/prPV2BpBIS/lib/perl5:/usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="23062"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.20.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/prPV2BpBIS"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/prPV2BpBIS""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/prPV2BpBIS"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/jail/prPV2BpBIS/lib/perl5/5.20.0/amd64-freebsd
/usr/home/cpan/pit/jail/prPV2BpBIS/lib/perl5/5.20.0
/usr/home/cpan/pit/jail/prPV2BpBIS/lib/perl5/amd64-freebsd
/usr/home/cpan/pit/jail/prPV2BpBIS/lib/perl5
/usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.20.0/.cpanplus/5.20.0/build/GwgHJj2cHi/App-Cme-1.034/blib/arch
/usr/home/cpan/pit/bare/perl-5.20.0/lib/site_perl/5.20.0/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.20.0/lib/site_perl/5.20.0
/usr/home/cpan/pit/bare/perl-5.20.0/lib/5.20.0/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.20.0/lib/5.20.0
.