Benchmark-Perl-Formance v0.55 Perl 5 v5.36.0 x86_64-linux-thread-multi
- Status
- Pass
- From
- Andreas J. König (ANDK)
- Dist
-
Benchmark-Perl-Formance v0.55
- Platform
- Perl 5 v5.36.0 x86_64-linux-thread-multi
- Date
- 2022-06-10 02:58:18
- ID
- 2e2ce11a-e869-11ec-9645-2bb5f2263042
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Steffen Schwigon,
This is a computer-generated report for Benchmark-Perl-Formance-0.55
on perl 5.36.0, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/tmp/basesmoker-reloperl-IKow/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ......... ok
#
# Testing Benchmark::Perl::Formance 0.55, Perl 5.036000, /tmp/basesmoker-reloperl-IKow/bin/perl
t/00-load.t ............ ok
t/author-eol.t ......... skipped: these tests are for testing by the author
t/author-pod-syntax.t .. skipped: these tests are for testing by the author
t/basic.t .............. ok
#
# Sample run. May take some seconds...
# Run DPath...
# Run Fib...
# Run FibOO...
# Run Mem...
# Run MatrixReal...
# Run Prime...
# Run Rx...
# Skip plugin 'Rx':Illegal division by zero at lib/Benchmark/Perl/Formance/Plugin/Rx.pm line 97.
# Run RxMicro...
# Run Shootout::fasta...
# Run Shootout::regexdna...
# Run Shootout::binarytrees...
# Run Shootout::revcomp...
# Run Shootout::nbody...
# Run Shootout::spectralnorm...
#
# perlformance.perl5.DPath.dpath : 0.083576
# perlformance.perl5.Fib : 0.034042
# perlformance.perl5.FibOO : 0.037995
# perlformance.perl5.MatrixReal.det.005 : 0.110891
# perlformance.perl5.MatrixReal.det_LR.005 : 0.099425
# perlformance.perl5.MatrixReal.inverse.005 : 0.355963
# perlformance.perl5.MatrixReal.invert_LR.005 : 0.352626
# perlformance.perl5.MatrixReal.matrix_squared.005 : 0.097335
# perlformance.perl5.MatrixReal.matrix_times_itself.005 : 0.086482
# perlformance.perl5.MatrixReal.to_negative_one.005 : 0.395719
# perlformance.perl5.Mem.allocate : 0.238321
# perlformance.perl5.Mem.copy : 0.418942
# perlformance.perl5.Prime.math_primality : 0.002563
# perlformance.perl5.RxMicro.code-literal : 0.344800
# perlformance.perl5.RxMicro.code-runtime : 0.250293
# perlformance.perl5.RxMicro.precompile-access : 0.435942
# perlformance.perl5.RxMicro.runtime-compile : 0.571385
# perlformance.perl5.RxMicro.runtime-compile-nocache : 0.500636
# perlformance.perl5.Shootout.binarytrees : 0.134054
# perlformance.perl5.Shootout.fasta : 0.102069
# perlformance.perl5.Shootout.nbody : 0.045705
# perlformance.perl5.Shootout.spectralnorm : 0.300500
t/samplerun.t .......... ok
All tests successful.
Files=6, Tests=21, 9 wallclock secs ( 0.06 usr 0.07 sys + 8.48 cusr 1.16 csys = 9.77 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
----------------------------------------- ---- --------
Config::Perl::V 0 0.33
Data::DPath 0 0.58
Data::Structure::Util 0 0.16
Data::YAML::Writer 0 0.0.7
Devel::Platform::Info 0 1.00
JSON 0 4.06
List::Util 0 1.62
Math::MatrixReal 0 2.13
Math::Primality 0 0.08
Module::Pluggable 0 5.2
Module::Runtime 0 0.016
Sys::Hostname 0 1.24
Sys::Info 0 0.7811
build_requires:
Module Need Have
----------------------------------------- ---- --------
Data::YAML::Reader 0 0.0.7
ExtUtils::MakeMaker 0 7.64
File::Spec 0 3.84
IO::Handle 0 1.48
IPC::Open3 0 1.22
Test::More 0.88 1.302190
configure_requires:
Module Need Have
----------------------------------------- ---- --------
ExtUtils::MakeMaker 0 7.64
opt_requires:
Module Need Have
----------------------------------------- ---- --------
BenchmarkAnything::Storage::Frontend::Lib 0 0.023
Clone 0 0.45
experimental 0 0.028
File::Copy::Recursive 0 0.45
File::ShareDir 0 1.118
Math::GMPz 0 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LC_ADDRESS = de_DE.UTF-8
LC_IDENTIFICATION = de_DE.UTF-8
LC_MEASUREMENT = de_DE.UTF-8
LC_MONETARY = de_DE.UTF-8
LC_NAME = de_DE.UTF-8
LC_NUMERIC = de_DE.UTF-8
LC_PAPER = de_DE.UTF-8
LC_TELEPHONE = de_DE.UTF-8
LC_TIME = de_DE.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/local/sbin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/usr/local/perl/bin:/usr/X11/bin
PERL = /tmp/basesmoker-reloperl-IKow/bin/perl
PERL5LIB = /tmp/loop_over_bdir-226700-yecXbJ/ProjectBuilder-0.14.1-0/blib/arch:/tmp/loop_over_bdir-226700-yecXbJ/ProjectBuilder-0.14.1-0/blib/lib:/tmp/loop_over_bdir-226700-yecXbJ/mmds-1.902-0/blib/arch:/tmp/loop_over_bdir-226700-yecXbJ/mmds-1.902-0/blib/lib:/tmp/loop_over_bdir-226700-yecXbJ/Serge-1.4-0/blib/arch:/tmp/loop_over_bdir-226700-yecXbJ/Serge-1.4-0/blib/lib:/tmp/loop_over_bdir-226700-yecXbJ/Net-OpenVPN-DDNS-0.1-0/blib/arch:/tmp/loop_over_bdir-226700-yecXbJ/Net-OpenVPN-DDNS-0.1-0/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 226708
PERL5_CPAN_IS_RUNNING = 226708
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-IKow/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.34
CPAN::Meta 2.150010
Cwd 3.84
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.45
File::Spec 3.84
JSON 4.06
JSON::PP 4.09
Module::Build 0.4231
Module::Signature 0.88
Parse::CPAN::Meta 2.150010
Test::Harness 3.44
Test::More 1.302190
YAML 1.30
YAML::Syck 1.34
version 0.9929
--
Summary of my perl5 (revision 5 version 36 subversion 0) configuration:
Commit id: b3c502b607191da0e743a4fa34501a05442305b3
Platform:
osname=linux
osvers=5.15.0-35-generic
archname=x86_64-linux-thread-multi
uname='linux k93jammy 5.15.0-35-generic #36-ubuntu smp sat may 21 02:24:07 utc 2022 x86_64 x86_64 x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.36.0/b4f3 -Dmyhostname=k93jammy -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Duseithreads -Uuselongdouble -DEBUGGING=-g'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2 -g'
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='11.2.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/x86_64-linux-gnu /usr/lib /usr/lib64
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/x86_64-linux-gnu/libc.so.6
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.35'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under linux
Compiled at Jun 8 2022 05:53:36
%ENV:
PERL="/tmp/basesmoker-reloperl-IKow/bin/perl"
PERL5LIB="/tmp/loop_over_bdir-226700-yecXbJ/ProjectBuilder-0.14.1-0/blib/arch:/tmp/loop_over_bdir-226700-yecXbJ/ProjectBuilder-0.14.1-0/blib/lib:/tmp/loop_over_bdir-226700-yecXbJ/mmds-1.902-0/blib/arch:/tmp/loop_over_bdir-226700-yecXbJ/mmds-1.902-0/blib/lib:/tmp/loop_over_bdir-226700-yecXbJ/Serge-1.4-0/blib/arch:/tmp/loop_over_bdir-226700-yecXbJ/Serge-1.4-0/blib/lib:/tmp/loop_over_bdir-226700-yecXbJ/Net-OpenVPN-DDNS-0.1-0/blib/arch:/tmp/loop_over_bdir-226700-yecXbJ/Net-OpenVPN-DDNS-0.1-0/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="226708"
PERL5_CPAN_IS_RUNNING="226708"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/tmp/loop_over_bdir-226700-yecXbJ/ProjectBuilder-0.14.1-0/blib/arch
/tmp/loop_over_bdir-226700-yecXbJ/ProjectBuilder-0.14.1-0/blib/lib
/tmp/loop_over_bdir-226700-yecXbJ/mmds-1.902-0/blib/arch
/tmp/loop_over_bdir-226700-yecXbJ/mmds-1.902-0/blib/lib
/tmp/loop_over_bdir-226700-yecXbJ/Serge-1.4-0/blib/arch
/tmp/loop_over_bdir-226700-yecXbJ/Serge-1.4-0/blib/lib
/tmp/loop_over_bdir-226700-yecXbJ/Net-OpenVPN-DDNS-0.1-0/blib/arch
/tmp/loop_over_bdir-226700-yecXbJ/Net-OpenVPN-DDNS-0.1-0/blib/lib
/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.36.0/b4f3/lib/site_perl/5.36.0/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.36.0/b4f3/lib/site_perl/5.36.0
/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.36.0/b4f3/lib/5.36.0/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/host/k93jammy/v5.36.0/b4f3/lib/5.36.0
.