Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: NA Test-MockPackages-0.8 v5.8.3 GNU/Linux
Date: 2016-07-11T19:53:53Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Thomas Peters,
This is a computer-generated report for Test-MockPackages-0.8
on perl 5.8.3, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Test::MockPackages;'
# at t/00-load.t line 6.
# Tried to use 'Test::MockPackages'.
# Error: Perl v5.8.500 required--this is only v5.8.3, stopped at /tmp/loop_over_bdir-23391-nPps19/Test-MockPackages-0.8-0/blib/lib/Test/MockPackages.pm line 5.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23391-nPps19/Test-MockPackages-0.8-0/blib/lib/Test/MockPackages.pm line 5.
# Compilation failed in require at t/00-load.t line 6.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Testing Test::MockPackages , Perl 5.008003, /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/bin/perl
# Looks like you failed 1 test of 1.
t/00-load.t ..........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Perl v5.8.500 required--this is only v5.8.3, stopped at /tmp/loop_over_bdir-23391-nPps19/Test-MockPackages-0.8-0/blib/lib/Test/MockPackages.pm line 5.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23391-nPps19/Test-MockPackages-0.8-0/blib/lib/Test/MockPackages.pm line 5.
Compilation failed in require at t/01-mockpackages.t line 10.
BEGIN failed--compilation aborted at t/01-mockpackages.t line 10.
t/01-mockpackages.t ..
Dubious, test returned 9 (wstat 2304, 0x900)
No subtests run
t/02-packages.t ...... ok
t/03-returns.t ....... ok
# Failed test 'exception when called() used with multiple returns()'
# at t/04-mock.t line 646.
# expecting: Regexp ((?-xism:called\(\)\ cannot\ be\ used\ if\ expects\(\)\ or\ returns\(\)\ have\ been\ defined\ more\ than\ once))
# found: normal exit
# Failed test 'exception when never_called() used with returns()'
# at t/04-mock.t line 664.
# expecting: Regexp ((?-xism:never_called\(\)\ cannot\ be\ used\ if\ called\(\)\,\ expects\(\)\,\ or\ returns\(\)\ have\ been\ defined))
# found: normal exit
# Looks like you failed 2 tests of 5.
# Failed test '_validate'
# at t/04-mock.t line 675.
# Looks like you failed 1 test of 6.
t/04-mock.t ..........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/6 subtests
Perl v5.8.500 required--this is only v5.8.3, stopped at /tmp/loop_over_bdir-23391-nPps19/Test-MockPackages-0.8-0/blib/lib/Test/MockPackages.pm line 5.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-23391-nPps19/Test-MockPackages-0.8-0/blib/lib/Test/MockPackages.pm line 5.
Compilation failed in require at t/05-mock_export.t line 8.
BEGIN failed--compilation aborted at t/05-mock_export.t line 8.
t/05-mock_export.t ...
Dubious, test returned 9 (wstat 2304, 0x900)
No subtests run
# Failed test 'Pod coverage on Test::MockPackages'
# at /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/lib/site_perl/5.8.3/Test/Pod/Coverage.pm line 133.
# Test::MockPackages: requiring 'Test::MockPackages' failed
# Looks like you failed 1 test of 4.
t/pod-coverage.t .....
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
t/pod.t .............. ok
Test Summary Report
-------------------
t/00-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/01-mockpackages.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: No plan found in TAP output
t/04-mock.t (Wstat: 256 Tests: 6 Failed: 1)
Failed test: 6
Non-zero exit status: 1
t/05-mock_export.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: No plan found in TAP output
t/pod-coverage.t (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=8, Tests=25, 2 wallclock secs ( 0.06 usr 0.05 sys + 0.69 cusr 0.18 csys = 0.98 CPU)
Result: FAIL
Failed 5/8 test programs. 3/25 subtests failed.
Makefile:870: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Const::Fast 0 0.014
Lingua::EN::Inflect 0 1.899
Test::Deep 0 1.120
Test::Exception 0 0.43
Test::More 0 1.302041
Test::Pod 1.22 1.51
Test::Pod::Coverage 1.08 1.10
Test::Tester 0 1.302041
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.19_05
configure_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.19_05
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 23392
PERL5_CPAN_IS_RUNNING = 23392
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.14
CPAN::Meta 2.150009
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.19_05
ExtUtils::Install 1.54
ExtUtils::MakeMaker 7.19_05
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
JSON 2.90
JSON::PP 2.27400
Module::Build 0.4218
Module::Signature 0.80
Parse::CPAN::Meta 2.150009
Test::Harness 3.36
Test::More 1.302041
YAML 1.18
YAML::Syck 1.29
version 0.9917
--
Summary of my perl5 (revision 5.0 version 8 subversion 3) configuration:
Platform:
osname=linux, osvers=4.3.0-1-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux k83 4.3.0-1-amd64 #1 smp debian 4.3.3-7 (2016-01-19) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Duseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='5.3.1 20160121', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
libc=libc-2.21.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.21'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS USE_64_BIT_INT USE_64_BIT_ALL USE_LONG_DOUBLE USE_LARGE_FILES PERL_IMPLICIT_CONTEXT
Locally applied patches:
Devel::PatchPerl 1.40
Built under linux
Compiled at Feb 27 2016 09:24:41
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="23392"
PERL5_CPAN_IS_RUNNING="23392"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/lib/5.8.3/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/lib/5.8.3
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/lib/site_perl/5.8.3/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/lib/site_perl/5.8.3
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.8.3/109d/lib/site_perl
.