Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Acme-Hello-0.04 v5.10.0 Dragonfly BSD
Date: 2010-10-21T16:56:52Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear AUDREYT,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9007. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Oct 21 17:56:50 2010] Checking prerequisites...
recommends:
* Locale::Maketext::Lexicon is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Creating new 'MYMETA.yml' with configuration results
Creating new 'Build' script for 'Acme-Hello' version '0.04'
[MSG] [Thu Oct 21 17:56:50 2010] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Oct 21 17:56:50 2010] Checking for previous PASS result for "Acme-Hello-0.04"
[MSG] [Thu Oct 21 17:56:51 2010] Building Acme-Hello
[ERROR] [Thu Oct 21 17:56:52 2010] MAKE TEST failed:
t/0-signature.t .. ok
t/1-basic.t ......
Failed 2/3 subtests
Test Summary Report
-------------------
t/1-basic.t (Wstat: 0 Tests: 3 Failed: 2)
Failed tests: 2-3
Files=2, Tests=4, 1 wallclock secs ( 0.03 usr 0.09 sys + 0.02 cusr 0.12 csys = 0.25 CPU)
Result: FAIL
Failed 1/2 test programs. 2/4 subtests failed.
BEGIN failed--compilation aborted at /usr/home/cpan/pit/bare/perl-5.10.0/bin/cpanp-run-perl line 8.
[MSG] [Thu Oct 21 17:56:52 2010] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9007
CPANPLUS::Dist::Build 0.48
Cwd 3.33
ExtUtils::CBuilder 0.2703
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3607
Test::Harness 3.22
Test::More 0.96
version 0.82
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.58.
Powered by minismokebox version 0.32
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/pkg/sbin:/usr/pkg/bin:/usr/pkg/xorg/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-Hello-0.04/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-Hello-0.04/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 98023
PERL5_CPANPLUS_IS_VERSION = 0.9007
PERL5_MINISMOKEBOX = 0.32
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.10.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.10.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=dragonfly, osvers=2.6-release, archname=i386-dragonfly
uname='dragonfly ddraig32.bingosnet.co.uk 2.6-release dragonfly v2.6.3-release #4: mon may 3 09:54:14 pdt 2010 root@test28.backplane.com:usrobjusrsrc-miscsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.10.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 (DragonFly)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_LARGE_FILES USE_PERLIO
Built under dragonfly
Compiled at Sep 26 2010 16:48:03
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-Hello-0.04/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-Hello-0.04/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="98023"
PERL5_CPANPLUS_IS_VERSION="0.9007"
PERL5_MINISMOKEBOX="0.32"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.10.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-Hello-0.04/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/Acme-Hello-0.04/blib/arch
/usr/home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/i386-dragonfly
/usr/home/cpan/pit/bare/perl-5.10.0/lib/5.10.0
/usr/home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/i386-dragonfly
/usr/home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0
.