Back
From: metabase:user:e3434da8-b236-11df-85ca-0247c6d74bde
Subject: PASS Device-Modem-1.53 v5.12.2 GNU/Linux
Date: 2010-11-25T19:50:09Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Cosimo Streppone,
This is a computer-generated report for Device-Modem-1.53
on perl 5.12.2, created by CPAN-Reporter-1.1803.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/tester/perltest/perl-5.12.2/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..15
ok 1
*** REMEMBER to run these tests as `root' where required!
No serial port set up, so *NO* tests will be executed...
To enable full testing, you can set these environment vars:
DEV_MODEM_PORT=[your serial port] (Ex.: 'COM1', '/dev/ttyS1', ...)
DEV_MODEM_BAUD=[serial link speed] (default is 19200)
On most unix environments, this can be done running:
DEV_MODEM_PORT=/dev/modem DEV_MODEM_BAUD=19200 make test
On Win32 systems, you can do:
set DEV_MODEM_PORT=COM1
set DEV_MODEM_BAUD=19200
nmake test (or make test)
skip 2
skip 3
skip 4
skip 5
skip 6
skip 7
skip 8
skip 9
skip 10
skip 11
skip 12
skip 13
skip 14
skip 15
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- ----
Device::SerialPort 0 1.04
configure_requires:
Module Need Have
------------------- ---- ----
ExtUtils::MakeMaker 0 6.56
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.utf8
PATH = /home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/current/bin:/home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/current/bin:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/tester/bin
PERL5LIB = /home/tester/perltest/perl-5.12.2/.cpan/build/Device-SerialPort-1.04-dzTRvj/blib/arch:/home/tester/perltest/perl-5.12.2/.cpan/build/Device-SerialPort-1.04-dzTRvj/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 8487
PERL5_CPAN_IS_RUNNING = 8487
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 3080,8487
PERL_CR_SMOKER_CURRENT = Device-Gsm-1.56
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/tester/perltest/perl-5.12.2/bin/perl
$UID/$EUID = 501 / 501
$GID = 501 501
$EGID = 501 501
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.94_56
Cwd 3.31
ExtUtils::CBuilder 0.27
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.57
ExtUtils::ParseXS 2.21
File::Spec 3.31_01
Module::Build 0.3603
Module::Signature n/a
Test::Harness 3.17
Test::More 0.94
YAML n/a
YAML::Syck 1.17
version 0.85
--
Summary of my perl5 (revision 5 version 12 subversion 2) configuration:
Platform:
osname=linux, osvers=2.6.35.6-48.fc14.x86_64, archname=x86_64-linux-thread-multi
uname='linux venice 2.6.35.6-48.fc14.x86_64 #1 smp fri oct 22 15:36:08 utc 2010 x86_64 x86_64 x86_64 gnulinux '
config_args='-Dusethreads -Duse64bigint -Dprefix=/home/tester/perltest/perl-5.12.2'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.5.1 20100924 (Red Hat 4.5.1-4)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.12.90'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Nov 24 2010 23:51:50
%ENV:
PERL5LIB="/home/tester/perltest/perl-5.12.2/.cpan/build/Device-SerialPort-1.04-dzTRvj/blib/arch:/home/tester/perltest/perl-5.12.2/.cpan/build/Device-SerialPort-1.04-dzTRvj/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="8487"
PERL5_CPAN_IS_RUNNING="8487"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="3080,8487"
PERL_CR_SMOKER_CURRENT="Device-Gsm-1.56"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/tester/perltest/perl-5.12.2/.cpan/build/Device-SerialPort-1.04-dzTRvj/blib/arch
/home/tester/perltest/perl-5.12.2/.cpan/build/Device-SerialPort-1.04-dzTRvj/blib/lib
/home/tester/perltest/perl-5.12.2/lib/site_perl/5.12.2/x86_64-linux-thread-multi
/home/tester/perltest/perl-5.12.2/lib/site_perl/5.12.2
/home/tester/perltest/perl-5.12.2/lib/5.12.2/x86_64-linux-thread-multi
/home/tester/perltest/perl-5.12.2/lib/5.12.2
.