Back
From: metabase:user:2382fb92-f565-11e2-8dd3-3b248eff5341
Subject: FAIL Apache-TopicMaps-0.02 v5.18.0 GNU/Linux
Date: 2013-08-01T23:22:18Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear ALGER,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9138. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/tester/pit/rel/perl-5.18.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Array found where operator expected at (eval 4) line 2, at end of line
(Do you need to predeclare TopicMaps?)
# Failed test 'use Apache-TopicMaps;'
# at t/1.t line 9.
# Tried to use 'Apache-TopicMaps'.
# Error: syntax error at (eval 4) line 2, near "TopicMaps @"
# Looks like you failed 1 test of 1.
t/1.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Test Summary Report
-------------------
t/1.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.05 cusr 0.00 csys = 0.09 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 1
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.72 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9138
CPANPLUS::Dist::Build 0.72
Cwd 3.40
ExtUtils::CBuilder 0.280210
ExtUtils::Command 1.17
ExtUtils::Install 1.59
ExtUtils::MakeMaker 6.72
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.18
File::Spec 3.40
Module::Build 0.4007
Pod::Parser 1.60
Pod::Simple 3.28
Test::Harness 3.28
Test::More 0.98
version 0.9902
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.88.
Powered by minismokebox version 0.56
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
NONINTERACTIVE_TESTING = 1
PATH = /home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/perl-5.19.2/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = :/home/tester/pit/rel/conf/perl-5.18.0/.cpanplus/5.18.0/build/Apache-TopicMaps/blib/lib:/home/tester/pit/rel/conf/perl-5.18.0/.cpanplus/5.18.0/build/Apache-TopicMaps/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 31625
PERL5_CPANPLUS_IS_VERSION = 0.9138
PERL5_MINISMOKEBOX = 0.56
PERL5_YACSMOKE_BASE = /home/tester/pit/rel/conf/perl-5.18.0
PERLBREW_BASHRC_VERSION = 0.64
PERLBREW_HOME = /home/tester/.perlbrew
PERLBREW_MANPATH = /home/tester/perl5/perlbrew/perls/perl-5.19.2/man
PERLBREW_PATH = /home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/perl-5.19.2/bin
PERLBREW_PERL = perl-5.19.2
PERLBREW_ROOT = /home/tester/perl5/perlbrew
PERLBREW_VERSION = 0.64
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/tester/pit/rel/perl-5.18.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 0) configuration:
Platform:
osname=linux, osvers=3.2.0-4-amd64, archname=x86_64-linux-thread-multi
uname='linux perlsmoke 3.2.0-4-amd64 #1 smp debian 3.2.46-1 x86_64 gnulinux '
config_args='-des -Dprefix=/home/tester/pit/rel/perl-5.18.0 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.7.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.13'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under linux
Compiled at Jul 29 2013 13:44:38
%ENV:
PERL5LIB=":/home/tester/pit/rel/conf/perl-5.18.0/.cpanplus/5.18.0/build/Apache-TopicMaps/blib/lib:/home/tester/pit/rel/conf/perl-5.18.0/.cpanplus/5.18.0/build/Apache-TopicMaps/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="31625"
PERL5_CPANPLUS_IS_VERSION="0.9138"
PERL5_MINISMOKEBOX="0.56"
PERL5_YACSMOKE_BASE="/home/tester/pit/rel/conf/perl-5.18.0"
PERLBREW_BASHRC_VERSION="0.64"
PERLBREW_HOME="/home/tester/.perlbrew"
PERLBREW_MANPATH="/home/tester/perl5/perlbrew/perls/perl-5.19.2/man"
PERLBREW_PATH="/home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/perl-5.19.2/bin"
PERLBREW_PERL="perl-5.19.2"
PERLBREW_ROOT="/home/tester/perl5/perlbrew"
PERLBREW_VERSION="0.64"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/tester/pit/rel/conf/perl-5.18.0/.cpanplus/5.18.0/build/Apache-TopicMaps/blib/lib
/home/tester/pit/rel/conf/perl-5.18.0/.cpanplus/5.18.0/build/Apache-TopicMaps/blib/arch
/home/tester/pit/rel/perl-5.18.0/lib/site_perl/5.18.0/x86_64-linux-thread-multi
/home/tester/pit/rel/perl-5.18.0/lib/site_perl/5.18.0
/home/tester/pit/rel/perl-5.18.0/lib/5.18.0/x86_64-linux-thread-multi
/home/tester/pit/rel/perl-5.18.0/lib/5.18.0
.