Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: PASS Net-Stripe-Simple-0.001 v5.18.2 GNU/Linux
Date: 2014-08-11T20:58:18Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Grant Street Group,
This is a computer-generated report for Net-Stripe-Simple-0.001
on perl 5.18.2, created by CPAN-Reporter-1.2011.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/127e/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 44.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 47.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 52.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 554.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 563.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 652.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 653.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 44.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 47.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 52.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 44.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 47.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 52.
t/00-compile.t ................ ok
#
# Generated by Dist::Zilla::Plugin::ReportVersions::Tiny v1.10
# perl: 5.018002 (wanted v5.10.0) on linux from /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/127e/bin/perl
#
# DateTime => 1.10 (want any version)
# Devel::StackTrace => 1.34 (want any version)
# Exporter => 5.68 (want any version)
# ExtUtils::MakeMaker => 6.98 (want any version)
# File::Spec => 3.47 (want any version)
# HTTP::Request::Common => 6.04 (want any version)
# IO::Handle => 1.34 (want any version)
# IPC::Open3 => 1.13 (want any version)
# JSON => 2.90 (want any version)
# LWP::UserAgent => 6.06 (want any version)
# MIME::Base64 => 3.13 (want any version)
# Scalar::Util => 1.39 (want any version)
# Test::More => 1.30100103 (want 0.88)
# URI::Escape => 3.31 (want any version)
# autodie => 2.13 (want any version)
# constant => 1.27 (want any version)
# overload => 1.22 (want any version)
# parent => 0.225 (want any version)
# strict => 1.07 (want any version)
# warnings => 1.18 (want any version)
#
# Thanks for using my code. I hope it works for you.
# If not, please try and include this output in the bug report.
# That will help me reproduce the issue and solve your problem.
#
t/000-report-versions-tiny.t .. ok
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 44.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 47.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 52.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 554.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 563.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 652.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 653.
t/basic.t ..................... ok
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 44.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 47.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 52.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 554.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 563.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 652.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 653.
t/data.t ...................... ok
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 44.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 47.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple/Data.pm line 52.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 554.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 563.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 652.
when is experimental at /tmp/loop_over_bdir-24242-OLUO7A/Net-Stripe-Simple-0.001-QLtewc/blib/lib/Net/Stripe/Simple.pm line 653.
t/errors.t .................... ok
t/release-pod-coverage.t ...... skipped: these tests are for release candidate testing
t/release-pod-syntax.t ........ skipped: these tests are for release candidate testing
All tests successful.
Files=7, Tests=35, 106 wallclock secs ( 0.05 usr 0.00 sys + 2.57 cusr 0.12 csys = 2.74 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------------- ---- ------------
constant 0 1.27
Devel::StackTrace 0 1.34
Exporter 0 5.68
HTTP::Request::Common 0 6.04
JSON 0 2.90
LWP::UserAgent 0 6.06
MIME::Base64 0 3.13
overload 0 1.22
parent 0 0.225
Scalar::Util 0 1.39
strict 0 1.07
URI::Escape 0 3.31
warnings 0 1.18
build_requires:
Module Need Have
--------------------- ---- ------------
autodie 0 2.13
DateTime 0 1.10
ExtUtils::MakeMaker 0 6.98
File::Spec 0 3.47
IO::Handle 0 1.34
IPC::Open3 0 1.13
Test::More 0.88 1.301001_030
configure_requires:
Module Need Have
--------------------- ---- ------------
ExtUtils::MakeMaker 0 6.98
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 24243
PERL5_CPAN_IS_RUNNING = 24243
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/127e/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ------------
CPAN 2.05
CPAN::Meta 2.142060
Cwd 3.47
ExtUtils::CBuilder 0.280216
ExtUtils::Command 1.17
ExtUtils::Install 1.59
ExtUtils::MakeMaker 6.98
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.24
File::Spec 3.47
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4206
Module::Signature 0.73
Parse::CPAN::Meta 1.4414
Test::Harness 3.32
Test::More 1.301001_030
YAML 1.01
YAML::Syck 1.27
version 0.9902
--
Summary of my perl5 (revision 5 version 18 subversion 2) configuration:
Commit id: e2a4306ace4a19cb3a434e4eb9fedad6ff1248b4
Platform:
osname=linux, osvers=3.14-2-amd64, archname=x86_64-linux-ld
uname='linux k83 3.14-2-amd64 #1 smp debian 3.14.13-2 (2014-07-24) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/127e -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.9.1', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Aug 11 2014 04:45:25
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="24243"
PERL5_CPAN_IS_RUNNING="24243"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/127e/lib/site_perl/5.18.2/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/127e/lib/site_perl/5.18.2
/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/127e/lib/5.18.2/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/127e/lib/5.18.2
.