Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Code-Generator-Perl-0.03 v5.15.1 GNU/Linux
Date: 2011-09-10T11:22:51Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear NAZRI,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9109. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Sep 10 12:20:47 2011] cp lib/Code/Generator/Perl.pm blib/lib/Code/Generator/Perl.pm
Manifying blib/man3/Code::Generator::Perl.3
[ERROR] [Sat Sep 10 12:20:48 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/pit/bare/perl-5.15.1/bin/perl5.15.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# You can safely ignore the following error message:
Bareword found where operator expected at t/tmp/Broken.pm line 9, near "$broken var"
(Missing operator before var?)
Error while generating t/tmp/Broken.pm:
syntax error at t/tmp/Broken.pm line 9, near "$broken var name "
Compilation failed in require at (eval 16) line 1.
BEGIN failed--compilation aborted at (eval 16) line 1.
# You can now go back to not-ignoring any error messages from here onwards.
Error while generating t/tmp/PackageReadonly.pm:
Can't locate Readonly.pm in @INC (@INC contains: t/tmp /home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/arch /home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1/x86_64-linux /home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1 /home/cpan/pit/bare/perl-5.15.1/lib/5.15.1/x86_64-linux /home/cpan/pit/bare/perl-5.15.1/lib/5.15.1 .) at t/tmp/PackageReadonly.pm line 5.
BEGIN failed--compilation aborted at t/tmp/PackageReadonly.pm line 5.
Compilation failed in require at (eval 24) line 1.
BEGIN failed--compilation aborted at (eval 24) line 1.
# Failed test 'Generate PackageReadonly'
# at t/Code-Generator-Perl.t line 158.
Error while generating t/tmp/VariableReadonly.pm:
Can't locate Readonly.pm in @INC (@INC contains: t/tmp /home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/arch /home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1/x86_64-linux /home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1 /home/cpan/pit/bare/perl-5.15.1/lib/5.15.1/x86_64-linux /home/cpan/pit/bare/perl-5.15.1/lib/5.15.1 .) at t/tmp/VariableReadonly.pm line 5.
BEGIN failed--compilation aborted at t/tmp/VariableReadonly.pm line 5.
Compilation failed in require at (eval 28) line 1.
BEGIN failed--compilation aborted at (eval 28) line 1.
# Failed test 'Generate VariableReadonly'
# at t/Code-Generator-Perl.t line 219.
Error while generating t/tmp/VariableOverrideGlobalReadonly.pm:
Can't locate Readonly.pm in @INC (@INC contains: t/tmp /home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/arch /home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1/x86_64-linux /home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1 /home/cpan/pit/bare/perl-5.15.1/lib/5.15.1/x86_64-linux /home/cpan/pit/bare/perl-5.15.1/lib/5.15.1 .) at t/tmp/VariableOverrideGlobalReadonly.pm line 5.
BEGIN failed--compilation aborted at t/tmp/VariableOverrideGlobalReadonly.pm line 5.
Compilation failed in require at (eval 30) line 1.
BEGIN failed--compilation aborted at (eval 30) line 1.
# Failed test 'Generate VariableOverrideGlobalReadonly'
# at t/Code-Generator-Perl.t line 258.
Error while generating t/tmp/PackageOverrideGlobalReadonly.pm:
Can't locate Readonly.pm in @INC (@INC contains: t/tmp /home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/arch /home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1/x86_64-linux /home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1 /home/cpan/pit/bare/perl-5.15.1/lib/5.15.1/x86_64-linux /home/cpan/pit/bare/perl-5.15.1/lib/5.15.1 .) at t/tmp/PackageOverrideGlobalReadonly.pm line 5.
BEGIN failed--compilation aborted at t/tmp/PackageOverrideGlobalReadonly.pm line 5.
Compilation failed in require at (eval 32) line 1.
BEGIN failed--compilation aborted at (eval 32) line 1.
# Failed test 'Generate PackageOverrideGlobalReadonly'
# at t/Code-Generator-Perl.t line 290.
# Looks like you failed 4 tests of 28.
t/Code-Generator-Perl.t ..
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/28 subtests
Test Summary Report
-------------------
t/Code-Generator-Perl.t (Wstat: 1024 Tests: 28 Failed: 4)
Failed tests: 17, 21, 23, 25
Non-zero exit status: 4
Files=1, Tests=28, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.10 cusr 0.02 csys = 0.14 CPU)
Result: FAIL
Failed 1/1 test programs. 4/28 subtests failed.
make: *** [test_dynamic] Error 4
[MSG] [Sat Sep 10 12:20:48 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Readonly
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'NAZRI (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Readonly' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Data::Dumper 2.131 2.121
ExtUtils::MakeMaker 6.59 0
File::Path 2.08_01 2.07
File::Spec 3.33 3.29
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9109
CPANPLUS::Dist::Build 0.56
Cwd 3.37
ExtUtils::CBuilder 0.280204
ExtUtils::Command 1.17
ExtUtils::Install 1.56
ExtUtils::MakeMaker 6.59
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.03
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.94
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.64.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/qt/bin:/usr/share/texmf/bin:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 31894
PERL5_CPANPLUS_IS_VERSION = 0.9109
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.15.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.15.1/bin/perl5.15.1
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 15 subversion 1) configuration:
Platform:
osname=linux, osvers=2.6.33.4, archname=x86_64-linux
uname='linux slack64 2.6.33.4 #3 smp wed may 12 23:13:09 cdt 2010 x86_64 intel(r) xeon(r) cpu e5520 @ 2.27ghz genuineintel gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.15.1 -Dusedevel'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.4', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib64 /usr/lib/../lib64 /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Jul 21 2011 09:42:45
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="31894"
PERL5_CPANPLUS_IS_VERSION="0.9109"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.15.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/lib
/home/cpan/pit/bare/conf/perl-5.15.1/.cpanplus/5.15.1/build/Code-Generator-Perl-0.03/blib/arch
/home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1/x86_64-linux
/home/cpan/pit/bare/perl-5.15.1/lib/site_perl/5.15.1
/home/cpan/pit/bare/perl-5.15.1/lib/5.15.1/x86_64-linux
/home/cpan/pit/bare/perl-5.15.1/lib/5.15.1
.