Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Test-Continuous-0.75 v5.23.1 GNU/Linux
Date: 2015-07-09T04:01:52Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Liu Kang Min,
This is a computer-generated report for Test-Continuous-0.75
on perl 5.23.1, created by CPAN-Reporter-1.2014.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/tmp/basesmoker-reloperl-N6jX/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
# Testing Test::Continuous 0.75
t/00.load.t ................................. ok
cannot remove path when cwd is /tmp/GGB5MgyFdL/ignorewfiles for /tmp/GGB5MgyFdL: at /home/sand/src/perl/repoperls/installed-perls/perl/v5.23.0-93-g779c45c/165a/lib/5.23.1/File/Temp.pm line 784.
t/01.exclude-list.t ......................... ok
t/simpleapp-diag.t .......................... ok
t/simpleapp-dubious.t ....................... ok
t/simpleapp-simple.t ........................ ok
# Failed test 'tests pass'
# at t/testclassapp-argv-contains-foo-and-bar.t line 21.
# '0 planned, only 0 passed.
# Non-zero exit status: t/runtests.t
# '
# doesn't match '(?^:ALL PASSED)'
# Failed test 'Bar tests run'
# at t/testclassapp-argv-contains-foo-and-bar.t line 22.
# 't/runtests.t:
# Can't locate Test/Class/Load.pm in @INC (you may need to install the Test::Class::Load module) (@INC contains: /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/../lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/inc /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.0 /usr/local/share/perl/5.20.0 .) at t/runtests.t line 1.
# BEGIN failed--compilation aborted at t/runtests.t line 1.
# No subtests run '
# doesn't match '(?^:Bar\->addition)'
# Failed test 'Foo tests run'
# at t/testclassapp-argv-contains-foo-and-bar.t line 23.
# 't/runtests.t:
# Can't locate Test/Class/Load.pm in @INC (you may need to install the Test::Class::Load module) (@INC contains: /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/../lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/inc /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.0 /usr/local/share/perl/5.20.0 .) at t/runtests.t line 1.
# BEGIN failed--compilation aborted at t/runtests.t line 1.
# No subtests run '
# doesn't match '(?^:Foo\->concatination)'
# Looks like you failed 3 tests of 3.
t/testclassapp-argv-contains-foo-and-bar.t ..
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/3 subtests
# Failed test 'tests pass'
# at t/testclassapp-argv-contains-nothing.t line 21.
# '0 planned, only 0 passed.
# Non-zero exit status: t/runtests.t
# '
# doesn't match '(?^:ALL PASSED)'
# Failed test 'Bar tests run'
# at t/testclassapp-argv-contains-nothing.t line 22.
# 't/runtests.t:
# Can't locate Test/Class/Load.pm in @INC (you may need to install the Test::Class::Load module) (@INC contains: /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/../lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/inc /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.0 /usr/local/share/perl/5.20.0 .) at t/runtests.t line 1.
# BEGIN failed--compilation aborted at t/runtests.t line 1.
# No subtests run '
# doesn't match '(?^:Bar\->addition)'
# Failed test 'Foo tests run'
# at t/testclassapp-argv-contains-nothing.t line 23.
# 't/runtests.t:
# Can't locate Test/Class/Load.pm in @INC (you may need to install the Test::Class::Load module) (@INC contains: /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/../lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/inc /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.0 /usr/local/share/perl/5.20.0 .) at t/runtests.t line 1.
# BEGIN failed--compilation aborted at t/runtests.t line 1.
# No subtests run '
# doesn't match '(?^:Foo\->concatination)'
# Looks like you failed 3 tests of 3.
t/testclassapp-argv-contains-nothing.t ......
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/3 subtests
# Failed test 'tests pass'
# at t/testclassapp-argv-contains-only-bar.t line 21.
# '0 planned, only 0 passed.
# Non-zero exit status: t/runtests.t
# '
# doesn't match '(?^:ALL PASSED)'
# Failed test 'Bar tests run'
# at t/testclassapp-argv-contains-only-bar.t line 22.
# 't/runtests.t:
# Can't locate Test/Class/Load.pm in @INC (you may need to install the Test::Class::Load module) (@INC contains: /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/../lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/inc /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.0 /usr/local/share/perl/5.20.0 .) at t/runtests.t line 1.
# BEGIN failed--compilation aborted at t/runtests.t line 1.
# No subtests run '
# doesn't match '(?^:Bar\->addition)'
# Looks like you failed 2 tests of 3.
t/testclassapp-argv-contains-only-bar.t .....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/3 subtests
# Failed test 'tests pass'
# at t/testclassapp-argv-contains-only-foo.t line 21.
# '0 planned, only 0 passed.
# Non-zero exit status: t/runtests.t
# '
# doesn't match '(?^:ALL PASSED)'
# Failed test 'Foo tests run'
# at t/testclassapp-argv-contains-only-foo.t line 23.
# 't/runtests.t:
# Can't locate Test/Class/Load.pm in @INC (you may need to install the Test::Class::Load module) (@INC contains: /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/t/../lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/inc /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/lib /tmp/loop_over_bdir-19054-5Jov8I/Test-Continuous-0.75-4hk6Tx/blib/arch /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.0 /usr/local/share/perl/5.20.0 .) at t/runtests.t line 1.
# BEGIN failed--compilation aborted at t/runtests.t line 1.
# No subtests run '
# doesn't match '(?^:Foo\->concatination)'
# Looks like you failed 2 tests of 3.
t/testclassapp-argv-contains-only-foo.t .....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/3 subtests
Test Summary Report
-------------------
t/testclassapp-argv-contains-foo-and-bar.t (Wstat: 768 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 3
t/testclassapp-argv-contains-nothing.t (Wstat: 768 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 3
t/testclassapp-argv-contains-only-bar.t (Wstat: 512 Tests: 3 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
t/testclassapp-argv-contains-only-foo.t (Wstat: 512 Tests: 3 Failed: 2)
Failed tests: 1, 3
Non-zero exit status: 2
Files=9, Tests=19, 8 wallclock secs ( 0.05 usr 0.06 sys + 5.37 cusr 1.48 csys = 6.96 CPU)
Result: FAIL
Failed 4/9 test programs. 10/19 subtests failed.
Makefile:810: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ----- --------
App::Prove 3.23 3.35
File::ChangeNotify 0.12 0.24
File::Spec 3.29 3.56
File::Temp 0.21 0.2304
Git::Repository 0 1.314
List::MoreUtils 0.22 0.413
Log::Dispatch 2.22 2.45
Module::ExtractUse 0.23 0.33
perl 5.008 5.023001
TAP::Harness 3.16 3.35
Test::More 0.42 1.001014
build_requires:
Module Need Have
------------------- ----- --------
CPAN::Meta 0 2.150005
ExtUtils::MakeMaker 6.59 7.04_01
Test::Class 0.41 0.50
YAML 0.77 1.15
configure_requires:
Module Need Have
------------------- ----- --------
CPAN::Meta 0 2.150005
ExtUtils::MakeMaker 6.59 7.04_01
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 19058
PERL5_CPAN_IS_RUNNING = 19058
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-N6jX/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.11
CPAN::Meta 2.150005
Cwd 3.56
ExtUtils::CBuilder 0.280223
ExtUtils::Command 1.20
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.04_01
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.28
File::Spec 3.56
JSON 2.90
JSON::PP 2.27300
Module::Build 0.4214
Module::Signature 0.79
Parse::CPAN::Meta 1.4417
Test::Harness 3.35
Test::More 1.001014
YAML 1.15
YAML::Syck 1.29
version 0.9909
--
Summary of my perl5 (revision 5 version 23 subversion 1) configuration:
Commit id: 779c45cea2b7a1f170504381f3de6b4ba0d8e7ee
Platform:
osname=linux, osvers=4.0.0-2-amd64, archname=x86_64-linux
uname='linux k83 4.0.0-2-amd64 #1 smp debian 4.0.5-1 (2015-06-16) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.23.0-93-g779c45c/165a -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Uuselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2 -g',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='4.9.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.19.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_USE_DEVEL USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jul 8 2015 19:35:11
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="19058"
PERL5_CPAN_IS_RUNNING="19058"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.23.0-93-g779c45c/165a/lib/site_perl/5.23.1/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/perl/v5.23.0-93-g779c45c/165a/lib/site_perl/5.23.1
/home/sand/src/perl/repoperls/installed-perls/perl/v5.23.0-93-g779c45c/165a/lib/5.23.1/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/perl/v5.23.0-93-g779c45c/165a/lib/5.23.1
.