Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Math-LongDouble-0.17 v5.12.4 Dragonfly BSD
Date: 2016-02-02T16:15:56Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SISYPHUS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9156. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Running Mkbootstrap for Math::LongDouble ()
chmod 644 "LongDouble.bs"
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/bare/perl-5.12.4/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
No tests with this file. Instead, mainly for the benefit
of the author, we (hopefully) see some diagnostics from some
test executables that were run during the Makefile.PL stage.
CC = cc
OPTMIZE = -O
erfl & isnanl check (build): try.in: In function 'main':
try.in:13:8: warning: incompatible implicit declaration of built-in function 'erfl' [enabled by default]
/tmp//ccCJxCbn.o: In function `main':
try.in:(.text+0x1c): warning: erfl has lower than advertised precision
erfl & isnanl check (run): rop is set to a sane value
op is set to the correct value
build output (nanl check):
execution output (nanl check): rop set as expected
build output (nan**0 check):
try2.in: In function 'main':
try2.in:24:10: warning: incompatible implicit declaration of built-in function 'powl' [enabled by default]
/tmp//ccT65hxq.o: In function `main':
try2.in:(.text+0x4e): warning: powl has lower than advertised precision
nan**0 check diagnostic: 1.0L
build output (signbitl check):
execution output (signbitl check): ret set as expected
build output (sincosl check): try5.in: In function 'main':
try5.in:18:2: warning: incompatible implicit declaration of built-in function 'sincosl' [enabled by default]
/tmp//ccpEwwkM.o: In function `main':
try5.in:(.text+0x20): undefined reference to `sincosl'
t/01config_xtra.t .......... ok
NAN_POW_BUG is NOT defined
NANL_IS_UNAVAILABLE is NOT defined
ISNANL_IS_UNAVAILABLE is NOT defined
SIGNBITL_IS_UNAVAILABLE is NOT defined
SINCOSL_IS_UNAVAILABLE is defined
t/aab_basic.t .............. ok
Math::LongDouble::_have_isnanl() returns 1
Math::LongDouble::_have_nanl() returns 1
Math::LongDouble::_have_signbitl() returns 1
t/abs.t .................... ok
t/arith.t .................. ok
t/base_conversion.t ........ ok
t/bool.t ................... ok
t/cmp.t .................... ok
LD_DBL_DENORM_MIN not implemented
LD_LDBL_DENORM_MIN not implemented
t/constants.t .............. ok
t/inc_dec.t ................ ok
Ignoring that ceill(-0.6257) returned '0' instead of '-0'
t/int.t .................... ok
t/log_exp.t ................ ok
Math:LongDouble::_nan_pow_bug() returns 0
t/nan_pow.t ................ ok
t/new.t .................... ok
t/nnum.t ................... ok
t/overload.t ............... ok
12d: Expected 18446744073709551615 got 1.8446744073709551616e+19
$ok: abcefgh
t/overload_cmp_reversal.t ..
Failed 1/13 subtests
Skipping test 1 - no recent version of Test::Pod installed
t/pod.t .................... ok
Ignoring small discrepancy (bug) between sqrt(2) and 2**0.5
t/pow.t .................... ok
FYI:
DBL_DIG = 15
LDBL_DIG = 18
Default precison = 21
t/prec.t ................... ok
t/signbit.t ................ ok
Expected complementary values
but erf returned 7.88577197708907468021e-02
and erfc returned 9.21142280229109267076e-01
t/special.t ................
Failed 1/5 subtests
t/stringification.t ........ ok
using own implementation of sincosl function
t/trig.t ................... ok
Test Summary Report
-------------------
t/overload_cmp_reversal.t (Wstat: 0 Tests: 13 Failed: 1)
Failed test: 12
t/special.t (Wstat: 0 Tests: 5 Failed: 1)
Failed test: 2
Files=23, Tests=288, 1 wallclock secs ( 0.06 usr 0.07 sys + 0.29 cusr 0.30 csys = 0.72 CPU)
Result: FAIL
Failed 2/23 test programs. 2/288 subtests failed.
*** Error code 255
Stop.
make: stopped in /usr/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/QbLQRgGZ0e/Math-LongDouble-0.17
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.10 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9156
CPANPLUS::Dist::Build 0.78
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.10
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.10
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
Module::Build 0.4214
Pod::Parser 1.37
Pod::Simple 3.14
Test::Harness 3.36
Test::More 1.001014
version 0.9912
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.94.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/pkg/sbin:/usr/pkg/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/QbLQRgGZ0e/Math-LongDouble-0.17/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/QbLQRgGZ0e/Math-LongDouble-0.17/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 560355
PERL5_CPANPLUS_IS_VERSION = 0.9156
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.12.4
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.12.4/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 4) configuration:
Platform:
osname=dragonfly, osvers=4.0-release, archname=x86_64-dragonfly
uname='dragonfly dogn.bingosnet.co.uk 4.0-release dragonfly v4.0.6-release #0: sat jun 13 22:10:08 bst 2015 root@dogn.bingosnet.co.uk:usrobjusrsrcsysx86_64_generic x86_64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.12.4'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.7.4 [DragonFly] Release/2014-06-12', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.34
Built under dragonfly
Compiled at Jun 15 2015 16:11:08
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/QbLQRgGZ0e/Math-LongDouble-0.17/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/QbLQRgGZ0e/Math-LongDouble-0.17/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="560355"
PERL5_CPANPLUS_IS_VERSION="0.9156"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.12.4"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/QbLQRgGZ0e/Math-LongDouble-0.17/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.12.4/.cpanplus/5.12.4/build/QbLQRgGZ0e/Math-LongDouble-0.17/blib/arch
/usr/home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4/x86_64-dragonfly
/usr/home/cpan/pit/bare/perl-5.12.4/lib/site_perl/5.12.4
/usr/home/cpan/pit/bare/perl-5.12.4/lib/5.12.4/x86_64-dragonfly
/usr/home/cpan/pit/bare/perl-5.12.4/lib/5.12.4
.