Lab-Measurement v3.930 Perl 5 v5.34.0 x86_64-linux-thread-multi
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Lab-Measurement v3.930
- Platform
- Perl 5 v5.34.0 x86_64-linux-thread-multi
- Date
- 2025-04-18 14:41:41
- ID
- 3defc960-1c63-11f0-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear AKHUETTEL,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.34.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Lab/Test/*.t t/Moose/*.t t/Moose/Connection/*.t t/Moose/DataFile/*.t t/Moose/DataFile/Gnuplot/*.t t/Moose/Instrument/*.t t/Moose/Instrument/OI_Mercury/*.t
# checking installed modules
# using PDL::IO::CSV
# not using Lab::VISA
# not using Lab::VXI11
# not using USB::TMC
# using Math::Round
# not using Lab::Zhinst
# not using PDL::Graphics::Gnuplot
# not using LinuxGpib
# not using sys/ioctl.ph
# not using linux/usb/tmc.ph
# trying to load Lab/Moose.pm ...
Too late to run INIT block at /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib/Lab/Moose.pm line 157.
# trying to load Lab/Moose/Connection.pm ...
# trying to load Lab/Moose/Sweep.pm ...
# trying to load Lab/Moose/DataFolder.pm ...
# trying to load Lab/Moose/Instrument.pm ...
# trying to load Lab/Moose/Countdown.pm ...
# trying to load Lab/Moose/Catfile.pm ...
# trying to load Lab/Moose/DataFile.pm ...
# trying to load Lab/Moose/Stabilizer.pm ...
# trying to load Lab/Moose/Sweep/Continuous.pm ...
# trying to load Lab/Moose/Sweep/DataFile.pm ...
# trying to load Lab/Moose/Sweep/Step.pm ...
# trying to load Lab/Moose/Sweep/Continuous/Time.pm ...
# trying to load Lab/Moose/Sweep/Continuous/Voltage.pm ...
# trying to load Lab/Moose/Sweep/Continuous/Magnet.pm ...
# trying to load Lab/Moose/Sweep/Step/Voltage.pm ...
# trying to load Lab/Moose/Sweep/Step/Pulsewidth.pm ...
# trying to load Lab/Moose/Sweep/Step/Frequency.pm ...
# trying to load Lab/Moose/Sweep/Step/Temperature.pm ...
# trying to load Lab/Moose/Sweep/Step/Repeat.pm ...
# trying to load Lab/Moose/Sweep/Step/Phase.pm ...
# trying to load Lab/Moose/Sweep/Step/Power.pm ...
# trying to load Lab/Moose/Sweep/Step/Magnet.pm ...
# trying to load Lab/Moose/Sweep/Step/Pulsedelay.pm ...
# trying to load Lab/Moose/DataFile/Read.pm ...
# trying to load Lab/Moose/DataFile/Meta.pm ...
# trying to load Lab/Moose/DataFile/Gnuplot/Compressed.pm ...
# trying to load Lab/Moose/Connection/WWW.pm ...
# trying to load Lab/Moose/Connection/Debug.pm ...
# trying to load Lab/Moose/Connection/HTTP.pm ...
# trying to load Lab/Moose/Connection/Socket.pm ...
# trying to load Lab/Moose/Connection/IsoBus.pm ...
# trying to load Lab/Moose/Connection/Mock.pm ...
# trying to load Lab/Moose/Instrument/Keithley2000.pm ...
# trying to load Lab/Moose/Instrument/Cache.pm ...
# trying to load Lab/Moose/Instrument/Agilent33120A.pm ...
# trying to load Lab/Moose/Instrument/ZI_MFLI.pm ...
# trying to load Lab/Moose/Instrument/RS_FSV.pm ...
# trying to load Lab/Moose/Instrument/Keithley2400.pm ...
# trying to load Lab/Moose/Instrument/RS_RTB2000.pm ...
# trying to load Lab/Moose/Instrument/KeysightDSOS604A.pm ...
# trying to load Lab/Moose/Instrument/AttoCube_AMC.pm ...
# trying to load Lab/Moose/Instrument/Agilent34410A.pm ...
# trying to load Lab/Moose/Instrument/HP34420A.pm ...
# trying to load Lab/Moose/Instrument/KeysightE3633E.pm ...
# trying to load Lab/Moose/Instrument/Yokogawa7651.pm ...
# trying to load Lab/Moose/Instrument/HP3458A.pm ...
# trying to load Lab/Moose/Instrument/Bluefors_Temp.pm ...
Can't locate JSON.pm in @INC (you may need to install the JSON module) (@INC contains: /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/arch /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0/x86_64-linux-thread-multi /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0/x86_64-linux-thread-multi /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0 /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/x86_64-linux-thread-multi /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0/x86_64-linux-thread-multi /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0 /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/x86_64-linux-thread-multi /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5 /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/lib /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/arch /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0/x86_64-linux-thread-multi /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0 /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/x86_64-linux-thread-multi /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5 /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/lib /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/arch /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/arch /home/cpan/pit/thr/perl-5.34.0/lib/site_perl/5.34.0/x86_64-linux-thread-multi /home/cpan/pit/thr/perl-5.34.0/lib/site_perl/5.34.0 /home/cpan/pit/thr/perl-5.34.0/lib/5.34.0/x86_64-linux-thread-multi /home/cpan/pit/thr/perl-5.34.0/lib/5.34.0 .) at /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib/Lab/Moose/Instrument/Bluefors_Temp.pm line 23.
BEGIN failed--compilation aborted at /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib/Lab/Moose/Instrument/Bluefors_Temp.pm line 23.
Compilation failed in require at t/00-load.t line 121.
# Looks like your test exited with 2 just after 47.
t/00-load.t .............................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 70/117 subtests
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.70
#
# === Build Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.70
#
# === Test Requires ===
#
# Module Want Have
# ----------------------- -------- --------
# ExtUtils::MakeMaker any 7.70
# File::Find any 1.39
# File::Glob any 1.33
# File::Slurper any 0.014
# File::Spec any 3.80
# File::Spec::Functions any 3.80
# File::Temp any 0.2311
# Getopt::Long any 2.52
# IO::Uncompress::Bunzip2 any 2.212
# PDL::Ufunc any undef
# Test::Builder::Module any 1.302210
# Test::Fatal any 0.017
# Test::File any 1.995
# Test::More 1.001014 1.302210
# Test::Tester any 1.302210
# Text::Diff any 1.45
# aliased any 0.34
# lib any 0.65
# parent any 0.238
#
# === Test Recommends ===
#
# Module Want Have
# ---------- -------- --------
# CPAN::Meta 2.120900 2.150010
#
# === Runtime Requires ===
#
# Module Want Have
# ---------------------------- -------- --------
# Carp any 1.52
# Class::Method::Modifiers 2.11 2.15
# Clone 0.31 0.47
# Data::Dumper any 2.179
# DateTime any 1.66
# Encode any 3.08
# Exception::Class 1.0 1.45
# Exporter any 5.76
# Fcntl any 1.14
# File::Basename any 2.85
# File::Copy any 2.35
# File::Path any 2.18
# HTTP::Request any 7.00
# IO::Handle any 1.46
# IO::Select any 1.46
# IO::Socket::INET any 1.46
# JSON::PP any 4.06
# LWP::Simple any 6.78
# LWP::UserAgent any 6.78
# List::MoreUtils any 0.430
# List::Util any 1.69
# Math::Round any 0.08
# Module::Load 0.26 0.36
# Moose 2.1213 2.2207
# Moose::Role any 2.2207
# Moose::Util::TypeConstraints any 2.2207
# MooseX::Params::Validate 0.18 0.21
# MooseX::StrictConstructor any 0.21
# Net::RFC3161::Timestamp any 0.020
# PDL 2.007 2.100
# PDL::Core any 2.096
# PDL::IO::CSV any 0.011
# PDL::NiceSlice any 1.001
# POSIX any 1.97
# Role::Tiny 1.003004 2.002004
# Scalar::Util any 1.69
# Socket any 2.031
# Statistics::Descriptive any 3.0801
# Sys::Hostname any 1.23
# Term::ReadKey 2.30 2.38
# Test::More 1.001014 1.302210
# Tie::IxHash any 1.23
# Time::HiRes any 1.9767
# Time::Seconds any 1.3401
# Try::Tiny 0.22 0.32
# YAML::XS 0.41 v0.903.0
# constant any 1.33
# integer any 1.01
# namespace::autoclean 0.20 0.31
# strict any 1.12
# utf8 any 1.24
# warnings any 1.51
#
t/00-report-prereqs.t ................... ok
t/Dataset.t ............................. skipped: known to fail
t/Lab/Test/test.t ....................... ok
t/Meta.t ................................ skipped: known to fail
t/Moose/Connection/Socket.t ............. ok
t/Moose/DataFile/Gnuplot.t .............. skipped: test requires PDL::Graphics::Gnuplot
t/Moose/DataFile/Gnuplot/Compressed.t ... ok
t/Moose/DataFile/Read.t ................. ok
t/Moose/DataFolder.t .................... ok
Use of uninitialized value in string ne at /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib/Lab/Moose/Instrument.pm line 141.
t/Moose/Instrument/base.t ............... ok
t/Moose/Instrument/DummySource.t ........ ok
t/Moose/Instrument/HP34410A.t ........... ok
t/Moose/Instrument/HP34420A.t ........... ok
t/Moose/Instrument/HP8596E.t ............ skipped: test requires PDL::Graphics::Gnuplot
t/Moose/Instrument/HPE4400B.t ........... skipped: test requires PDL::Graphics::Gnuplot
t/Moose/Instrument/Keithley2400.t ....... ok
t/Moose/Instrument/KeysightB2901A.t ..... ok
t/Moose/Instrument/OI_Mercury/Magnet.t .. ok
t/Moose/Instrument/Rigol_DSA815.t ....... skipped: test requires PDL::Graphics::Gnuplot
setting data format: REAL, 32 at /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib/Lab/Moose/Instrument/RS_FSV.pm line 66.
t/Moose/Instrument/RS_FSV.t ............. ok
t/Moose/Instrument/RS_SMB.t ............. ok
setting data format: REAL, 32 at /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib/Lab/Moose/Instrument/VNASweep.pm line 119.
t/Moose/Instrument/RS_ZVA.t ............. ok
setting data format: REAL, 32 at /home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib/Lab/Moose/Instrument/VNASweep.pm line 119.
t/Moose/Instrument/RS_ZVM.t ............. ok
t/Moose/Instrument/SR830.t .............. ok
t/Moose/Instrument/YokogawaGS200.t ...... ok
t/Moose/Instrument/ZI_MFIA.t ............ ok
t/Moose/Instrument/ZI_MFLI.t ............ ok
Name "PDL::Graphics::Gnuplot::gp_version" used only once: possible typo at t/Moose/Plot.t line 30.
t/Moose/Plot.t .......................... skipped: test requires PDL::Graphics::Gnuplot
t/Moose/Stabilizer.t .................... ok
t/Moose/Sweep-Continuous-Time.t ......... ok
Going to sweep start:
Setpoint: 0
Rate: 2
at t/Moose/Sweep-Continuous-Voltage.t line 77.
Starting sweep
Setpoint: 10.5
Rate: 2
at t/Moose/Sweep-Continuous-Voltage.t line 77.
Starting sweep
Setpoint: 0
Rate: 5
at t/Moose/Sweep-Continuous-Voltage.t line 77.
t/Moose/Sweep-Continuous-Voltage.t ...... ok
t/Moose/Sweep-Plot.t .................... skipped: test requires PDL::Graphics::Gnuplot
dir: /tmp/US8DfhBBXw/sweep
t/Moose/Sweep.t ......................... ok
Test Summary Report
-------------------
t/00-load.t (Wstat: 512 (exited 2) Tests: 47 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 117 tests but ran 47.
Files=34, Tests=522, 41 wallclock secs ( 0.13 usr 0.06 sys + 13.54 cusr 2.29 csys = 16.02 CPU)
Result: FAIL
Failed 1/34 test programs. 0/522 subtests failed.
make: *** [Makefile:1557: test_dynamic] Error 255
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
JSON
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'AKHUETTEL (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'JSON' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.52 0
Class::Method::Modifiers 2.15 2.11
Clone 0.47 0.31
Data::Dumper 2.179 0
DateTime 1.66 0
Encode 3.08 0
Exception::Class 1.45 1.0
Exporter 5.76 0
ExtUtils::MakeMaker 7.70 0
Fcntl 1.14 0
File::Basename 2.85 0
File::Copy 2.35 0
File::Find 1.39 0
File::Glob 1.33 0
File::Path 2.18 0
File::Slurper 0.014 0
File::Spec 3.80 0
File::Spec::Functions 3.80 0
File::Temp 0.2311 0
Getopt::Long 2.52 0
HTTP::Request 7.00 0
IO::Handle 1.46 0
IO::Select 1.46 0
IO::Socket::INET 1.46 0
IO::Uncompress::Bunzip2 2.212 0
JSON::PP 4.06 0
LWP::Simple 6.78 0
LWP::UserAgent 6.78 0
List::MoreUtils 0.430 0
List::Util 1.69 0
Math::Round 0.08 0
Module::Load 0.36 0.26
Moose 2.2207 2.1213
Moose::Role 2.2207 0
Moose::Util::TypeConstraints 2.2207 0
MooseX::Params::Validate 0.21 0.18
MooseX::StrictConstructor 0.21 0
Net::RFC3161::Timestamp 0.020 0
PDL 2.100 2.007
PDL::Core 2.096 0
PDL::IO::CSV 0.011 0
PDL::NiceSlice 1.001 0
PDL::Ufunc 0 0
POSIX 1.97 0
Role::Tiny 2.002004 1.003004
Scalar::Util 1.69 0
Socket 2.031 0
Statistics::Descriptive 3.0801 0
Sys::Hostname 1.23 0
Term::ReadKey 2.38 2.30
Test::Builder::Module 1.302210 0
Test::Fatal 0.017 0
Test::File 1.995 0
Test::More 1.302210 1.001014
Test::Tester 1.302210 0
Text::Diff 1.45 0
Tie::IxHash 1.23 0
Time::HiRes 1.9767 0
Time::Seconds 1.3401 0
Try::Tiny 0.32 0.22
YAML::XS v0.903.0 0.41
aliased 0.34 0
constant 1.33 0
integer 1.01 0
lib 0.65 0
namespace::autoclean 0.31 0.20
parent 0.238 0
strict 1.12 0
utf8 1.24 0
warnings 1.51 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.80
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.80
Module::Build 0.4234
Pod::Parser 1.67
Pod::Simple 3.42
Test2 1.302210
Test::Harness 3.48
Test::More 1.302210
version 0.9932
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/lib:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/arch:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 25359
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.34.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/4Ewt1EaLzm
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/4Ewt1EaLzm"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/4Ewt1EaLzm
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.34.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 34 subversion 0) configuration:
Platform:
osname=linux
osvers=5.10.38-0-lts
archname=x86_64-linux-thread-multi
uname='linux agaric 5.10.38-0-lts #1-alpine smp fri, 21 may 2021 11:41:13 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.34.0 -Dusethreads'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong'
ccversion=''
gccversion='10.2.1 20201203'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib /lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -ldl -lm -lcrypt -lutil -lc
libc=/usr/lib/libc.a
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under linux
Compiled at May 22 2021 14:46:13
%ENV:
PERL5LIB="/home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/lib:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/arch:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="25359"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.34.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/4Ewt1EaLzm"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/4Ewt1EaLzm""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/4Ewt1EaLzm"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0/x86_64-linux-thread-multi
/home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/5.34.0
/home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/4Ewt1EaLzm/lib/perl5
/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/lib
/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/ek9qBK2BiW/aliased-0.34/blib/arch
/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/lib
/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/OWfL2icwc0/Lab-Measurement-3.930/blib/arch
/home/cpan/pit/thr/perl-5.34.0/lib/site_perl/5.34.0/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.34.0/lib/site_perl/5.34.0
/home/cpan/pit/thr/perl-5.34.0/lib/5.34.0/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.34.0/lib/5.34.0