CAD-Mesh3D v0.003 Perl 5 v5.18.3 x86_64-linux
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
CAD-Mesh3D v0.003
- Platform
- Perl 5 v5.18.3 x86_64-linux
- Date
- 2020-10-26 19:27:14
- ID
- 4095ed6c-17c1-11eb-a9f9-f9eb91108de4
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear PETERCJ,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9908. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.18.3/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-use.t ......... ok
t/10-initialize.t .. ok
t/20-math.t ........ ok
t/40-format.t ...... ok
t/99-fault.t ....... ok
t/STL-inputStl.t ... ok
t/STL-outputStl.t .. ok
All tests successful.
Files=7, Tests=292, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.36 cusr 0.05 csys = 0.46 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
CAD::Format::STL v0.2.1 v0.2.1
Carp 1.29 0
Exporter 5.68 5.57
ExtUtils::MakeMaker 7.48 0
Math::Vector::Real 0.18 0.18
Test::Exception 0.43 0
Test::More 1.302181 0.86
constant 1.27 0
strict 1.07 0
warnings 1.18 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9908
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280234
ExtUtils::Command 7.48
ExtUtils::Install 2.18
ExtUtils::MakeMaker 7.48
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.60
Pod::Simple 3.28
Test2 1.302181
Test::Harness 3.42
Test::More 1.302181
version 0.9928
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin:/var/lib/snapd/snap/bin:/snap/bin:/var/lib/snapd/snap/bin:/snap/bin:/var/lib/snapd/snap/bin
PERL5LIB = /home/cpan/pit/jail/SbP4UAnztO/lib/perl5:/home/cpan/pit/bare/conf/perl-5.18.3/.cpanplus/5.18.3/build/ms5OC0gbSe/CAD-Mesh3D-0.003/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.3/.cpanplus/5.18.3/build/ms5OC0gbSe/CAD-Mesh3D-0.003/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 2273819
PERL5_CPANPLUS_IS_VERSION = 0.9908
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.18.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/SbP4UAnztO
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/SbP4UAnztO"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/SbP4UAnztO
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.18.3/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 3) configuration:
Platform:
osname=linux, osvers=5.4.0-26-generic, archname=x86_64-linux
uname='linux uchder 5.4.0-26-generic #30-ubuntu smp mon apr 20 16:58:30 utc 2020 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.18.3'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='9.3.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.90
Built under linux
Compiled at Apr 26 2020 15:45:04
%ENV:
PERL5LIB="/home/cpan/pit/jail/SbP4UAnztO/lib/perl5:/home/cpan/pit/bare/conf/perl-5.18.3/.cpanplus/5.18.3/build/ms5OC0gbSe/CAD-Mesh3D-0.003/blib/lib:/home/cpan/pit/bare/conf/perl-5.18.3/.cpanplus/5.18.3/build/ms5OC0gbSe/CAD-Mesh3D-0.003/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="2273819"
PERL5_CPANPLUS_IS_VERSION="0.9908"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.18.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/SbP4UAnztO"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/SbP4UAnztO""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/SbP4UAnztO"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/SbP4UAnztO/lib/perl5/5.18.3/x86_64-linux
/home/cpan/pit/jail/SbP4UAnztO/lib/perl5/5.18.3
/home/cpan/pit/jail/SbP4UAnztO/lib/perl5/x86_64-linux
/home/cpan/pit/jail/SbP4UAnztO/lib/perl5
/home/cpan/pit/bare/conf/perl-5.18.3/.cpanplus/5.18.3/build/ms5OC0gbSe/CAD-Mesh3D-0.003/blib/lib
/home/cpan/pit/bare/conf/perl-5.18.3/.cpanplus/5.18.3/build/ms5OC0gbSe/CAD-Mesh3D-0.003/blib/arch
/home/cpan/pit/bare/perl-5.18.3/lib/site_perl/5.18.3/x86_64-linux
/home/cpan/pit/bare/perl-5.18.3/lib/site_perl/5.18.3
/home/cpan/pit/bare/perl-5.18.3/lib/5.18.3/x86_64-linux
/home/cpan/pit/bare/perl-5.18.3/lib/5.18.3
.