Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Data-Babel-Client-0.01_02 v5.8.9 GNU/Linux
Date: 2010-12-13T23:25:21Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Victor Cassen,
This is a computer-generated report for Data-Babel-Client-0.01_02
on perl 5.8.9, created by CPAN-Reporter-1.18_06.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build test':
Can't locate t/Build.pm in @INC (@INC contains: /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/lib /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/arch /usr/local/perl-5.8.9/lib/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/5.8.9 /usr/local/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/site_perl/5.8.9 .) at t/00-load.t line 5.
BEGIN failed--compilation aborted at t/00-load.t line 5.
# Looks like your test exited with 2 before it could output anything.
t/00-load.t ...............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Can't locate t/Build.pm in @INC (@INC contains: /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/lib /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/arch /usr/local/perl-5.8.9/lib/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/5.8.9 /usr/local/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/site_perl/5.8.9 .) at t/10-test_idtypes.t line 12.
BEGIN failed--compilation aborted at t/10-test_idtypes.t line 12.
t/10-test_idtypes.t .......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate t/Build.pm in @INC (@INC contains: /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/lib /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/arch /usr/local/perl-5.8.9/lib/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/5.8.9 /usr/local/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/site_perl/5.8.9 .) at t/11-test_translate.t line 12.
BEGIN failed--compilation aborted at t/11-test_translate.t line 12.
t/11-test_translate.t .....
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate t/Build.pm in @INC (@INC contains: /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/lib /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/arch /usr/local/perl-5.8.9/lib/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/5.8.9 /usr/local/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/site_perl/5.8.9 .) at t/12-test_missing_args.t line 12.
BEGIN failed--compilation aborted at t/12-test_missing_args.t line 12.
t/12-test_missing_args.t ..
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate t/lib.pm in @INC (@INC contains: /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/lib /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/arch /usr/local/perl-5.8.9/lib/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/5.8.9 /usr/local/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/site_perl/5.8.9 .) at t/13-test_bad_args.t line 12.
BEGIN failed--compilation aborted at t/13-test_bad_args.t line 12.
t/13-test_bad_args.t ......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/manifest.t .............. skipped: Author tests not required for installation
Can't locate t/Build.pm in @INC (@INC contains: /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/lib /home/sand/.cpan/build/Data-Babel-Client-0.01_02-gYYEl2/blib/arch /usr/local/perl-5.8.9/lib/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/5.8.9 /usr/local/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux /usr/local/perl-5.8.9/lib/site_perl/5.8.9 .) at t/pod-coverage.t line 6.
BEGIN failed--compilation aborted at t/pod-coverage.t line 6.
t/pod-coverage.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/pod.t ................... ok
Test Summary Report
-------------------
t/00-load.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/10-test_idtypes.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/11-test_translate.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/12-test_missing_args.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/13-test_bad_args.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/pod-coverage.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=8, Tests=1, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.21 cusr 0.06 csys = 0.32 CPU)
Result: FAIL
Failed 6/8 test programs. 0/1 subtests failed.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
build_requires:
Module Need Have
------------- ---- -------
Test::More 0 0.96
configure_requires:
Module Need Have
------------- ---- -------
Module::Build 0.36 0.36_20
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 22178
PERL5_CPAN_IS_RUNNING = 22178
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/local/perl-5.8.9/bin/perl
$UID/$EUID = 1001 / 1001
$GID = 1001 1001
$EGID = 1001 1001
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.94_62
Cwd 3.33
ExtUtils::CBuilder 0.2802
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.57_06
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.36_20
Module::Signature 0.66
Test::Harness 3.23
Test::More 0.96
YAML 0.72
YAML::Syck 1.17
version 0.87
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=2.6.26-1-amd64, archname=x86_64-linux
uname='linux k81 2.6.26-1-amd64 #1 smp sat jan 10 17:57:00 utc 2009 x86_64 gnulinux '
config_args='-Dprefix=/usr/local/perl-5.8.9 -des -Ui_db'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.3.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at May 17 2009 07:12:37
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="22178"
PERL5_CPAN_IS_RUNNING="22178"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/local/perl-5.8.9/lib/5.8.9/x86_64-linux
/usr/local/perl-5.8.9/lib/5.8.9
/usr/local/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux
/usr/local/perl-5.8.9/lib/site_perl/5.8.9
.