homebank2ledger v0.001 Perl 5 v5.10.0 x86_64-gnukfreebsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
homebank2ledger v0.001
- Platform
- Perl 5 v5.10.0 x86_64-gnukfreebsd
- Date
- 2019-06-13 09:40:18
- ID
- 418889c4-8dbf-11e9-9066-e374b0ba08e8
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear CCM,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9176. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.10.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'App/HomeBank2Ledger.pm loaded ok'
# at t/00-compile.t line 51.
# got: '65280'
# expected: '0'
syntax error at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger/Formatter.pm line 39, near "..."
Compilation failed in require at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger.pm line 8.
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger.pm line 8.
Compilation failed in require at -e line 1.
# Failed test 'App/HomeBank2Ledger/Formatter.pm loaded ok'
# at t/00-compile.t line 51.
# got: '65280'
# expected: '0'
syntax error at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger/Formatter.pm line 39, near "..."
Compilation failed in require at -e line 1.
# Failed test 'App/HomeBank2Ledger/Formatter/Beancount.pm loaded ok'
# at t/00-compile.t line 51.
# got: '65280'
# expected: '0'
syntax error at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger/Formatter.pm line 39, near "..."
Compilation failed in require at /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/parent.pm line 16.
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger/Formatter/Beancount.pm line 10.
Compilation failed in require at -e line 1.
# Failed test 'App/HomeBank2Ledger/Formatter/Ledger.pm loaded ok'
# at t/00-compile.t line 51.
# got: '65280'
# expected: '0'
syntax error at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger/Formatter.pm line 39, near "..."
Compilation failed in require at /home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/parent.pm line 16.
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger/Formatter/Ledger.pm line 10.
Compilation failed in require at -e line 1.
t/00-compile.t .........
Dubious, test returned 5 (wstat 1280, 0x500)
Failed 5/8 subtests
# Failed test 'bin/homebank2ledger compiled ok'
# at t/00-compile.t line 84.
# got: '65280'
# expected: '0'
syntax error at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger/Formatter.pm line 39, near "..."Compilation failed in require at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger.pm line 8.BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib/App/HomeBank2Ledger.pm line 8.Compilation failed in require at bin/homebank2ledger line 9.BEGIN failed--compilation aborted at bin/homebank2ledger line 9. at t/00-compile.t line 93, <GEN28> line 5.
# Looks like you failed 5 tests of 8.
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.36
#
# === Build Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.36
#
# === Test Requires ===
#
# Module Want Have
# ------------------- ---- --------
# ExtUtils::MakeMaker any 7.36
# File::Spec any 3.75
# IO::Handle any 1.27
# IPC::Open3 any 1.02
# Test::More any 1.302164
#
# === Test Recommends ===
#
# Module Want Have
# ---------- -------- --------
# CPAN::Meta 2.120900 2.150010
#
# === Runtime Requires ===
#
# Module Want Have
# ----------------- ---- ------
# Carp any 1.08
# Exporter any 5.62
# Getopt::Long 2.38 2.5
# Module::Load any 0.34
# Module::Pluggable any 5.2
# Pod::Usage any 1.35
# Scalar::Util any 1.19
# Time::Piece any 1.12
# XML::Entities any 1.0002
# XML::Parser::Lite any 0.722
# parent any 0.234
# strict any 1.04
# warnings any 1.06
#
t/00-report-prereqs.t .. ok
Test Summary Report
-------------------
t/00-compile.t (Wstat: 1280 Tests: 8 Failed: 5)
Failed tests: 1-4, 8
Non-zero exit status: 5
Files=2, Tests=9, 1 wallclock secs ( 0.03 usr 0.00 sys + 0.22 cusr 0.08 csys = 0.33 CPU)
Result: FAIL
Failed 1/2 test programs. 5/9 subtests failed.
make: *** [test_dynamic] Error 255
Makefile:926: recipe for target 'test_dynamic' failed
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.08 0
Exporter 5.62 0
ExtUtils::MakeMaker 7.36 0
File::Spec 3.75 0
Getopt::Long 2.5 2.38
IO::Handle 1.27 0
IPC::Open3 1.02 0
Module::Load 0.34 0
Module::Pluggable 5.2 0
Pod::Usage 1.35 0
Scalar::Util 1.19 0
Test::More 1.302164 0
Time::Piece 1.12 0
XML::Entities 1.0002 0
XML::Parser::Lite 0.722 0
parent 0.234 0
strict 1.04 0
warnings 1.06 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9176
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280231
ExtUtils::Command 7.36
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.36
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4229
Pod::Parser 1.35
Pod::Simple 3.32
Test2 1.302164
Test::Harness 3.42
Test::More 1.302164
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/script:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/pXrVRkGcxI/lib/perl5:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 91960
PERL5_CPANPLUS_IS_VERSION = 0.9176
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.10.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/pXrVRkGcxI
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/pXrVRkGcxI"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/pXrVRkGcxI
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.10.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=gnukfreebsd, osvers=10.1-0-amd64, archname=x86_64-gnukfreebsd
uname='gnukfreebsd kondor 10.1-0-amd64 #0 wed, 16 mar 2016 23:16:33 +0000 x86_64 amd64 qemu virtual cpu version 2.0.0 gnukfreebsd '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.10.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.9.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-kfreebsd-gnu /lib/../lib /usr/lib/x86_64-kfreebsd-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
libc=/usr/lib/x86_64-kfreebsd-gnu/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
Locally applied patches:
Devel::PatchPerl 1.42
Built under gnukfreebsd
Compiled at May 6 2016 22:25:21
%ENV:
PERL5LIB="/home/cpan/pit/jail/pXrVRkGcxI/lib/perl5:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib:/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="91960"
PERL5_CPANPLUS_IS_VERSION="0.9176"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.10.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/pXrVRkGcxI"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/pXrVRkGcxI""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/pXrVRkGcxI"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/pXrVRkGcxI/lib/perl5/5.10.0/x86_64-gnukfreebsd
/home/cpan/pit/jail/pXrVRkGcxI/lib/perl5/5.10.0
/home/cpan/pit/jail/pXrVRkGcxI/lib/perl5/x86_64-gnukfreebsd
/home/cpan/pit/jail/pXrVRkGcxI/lib/perl5
/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/lib
/home/cpan/pit/bare/conf/perl-5.10.0/.cpanplus/5.10.0/build/HwAQfVdgSo/homebank2ledger-0.001/blib/arch
/home/cpan/pit/bare/perl-5.10.0/lib/5.10.0/x86_64-gnukfreebsd
/home/cpan/pit/bare/perl-5.10.0/lib/5.10.0
/home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0/x86_64-gnukfreebsd
/home/cpan/pit/bare/perl-5.10.0/lib/site_perl/5.10.0
.