Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL X11-Protocol-0.56 v5.12.0 Dragonfly BSD
Date: 2011-06-29T03:17:02Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Stephen McCamant,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9105. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Jun 29 04:16:26 2011] Checking if your kit is complete...
Looks good
Warning: prerequisite X11::Protocol 0 not found.
Writing Makefile for X11-Protocol-Other
[MSG] [Wed Jun 29 04:16:26 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Jun 29 04:16:26 2011] Checking for previous PASS result for "X11-Protocol-Other-11"
[MSG] [Wed Jun 29 04:16:26 2011] Module 'X11::Protocol::Other' requires 'X11::Protocol' version '0' to be installed
[MSG] [Wed Jun 29 04:16:26 2011] Trying to get 'ftp://cpan.bingosnet.co.uk/CPAN/authors/id/S/SM/SMCCAM/CHECKSUMS'
[MSG] [Wed Jun 29 04:16:27 2011] Checksum matches for 'X11-Protocol-0.56.tar.gz'
[MSG] [Wed Jun 29 04:16:27 2011] Extracted 'X11::Protocol' to '/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/X11-Protocol-0.56'
[MSG] [Wed Jun 29 04:16:27 2011] CPANPLUS is prefering Build.PL
[MSG] [Wed Jun 29 04:16:27 2011] Checking if your kit is complete...
Looks good
Writing Makefile for X11::Protocol
[MSG] [Wed Jun 29 04:16:27 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Jun 29 04:16:27 2011] Checking for previous PASS result for "X11-Protocol-0.56"
[MSG] [Wed Jun 29 04:16:29 2011] cp Protocol.pm blib/lib/X11/Protocol.pm
cp Protocol/Ext/XC_MISC.pm blib/lib/X11/Protocol/Ext/XC_MISC.pm
cp Protocol/Ext/SHAPE.pm blib/lib/X11/Protocol/Ext/SHAPE.pm
cp Protocol/Ext/BIG_REQUESTS.pm blib/lib/X11/Protocol/Ext/BIG_REQUESTS.pm
cp Protocol/Connection/UNIXFH.pm blib/lib/X11/Protocol/Connection/UNIXFH.pm
cp Protocol/Connection/INETSocket.pm blib/lib/X11/Protocol/Connection/INETSocket.pm
cp Keysyms.pm blib/lib/X11/Keysyms.pm
cp Protocol/Ext/XFree86_Misc.pm blib/lib/X11/Protocol/Ext/XFree86_Misc.pm
cp Protocol/Connection/Socket.pm blib/lib/X11/Protocol/Connection/Socket.pm
cp Protocol/Constants.pm blib/lib/X11/Protocol/Constants.pm
cp Auth.pm blib/lib/X11/Auth.pm
cp Protocol/Connection/UNIXSocket.pm blib/lib/X11/Protocol/Connection/UNIXSocket.pm
cp Protocol/Ext/DPMS.pm blib/lib/X11/Protocol/Ext/DPMS.pm
cp Protocol/Ext/RENDER.pm blib/lib/X11/Protocol/Ext/RENDER.pm
cp Protocol/Connection/INETFH.pm blib/lib/X11/Protocol/Connection/INETFH.pm
cp Protocol/Connection.pm blib/lib/X11/Protocol/Connection.pm
cp Protocol/Connection/FileHandle.pm blib/lib/X11/Protocol/Connection/FileHandle.pm
Manifying blib/man3/X11::Protocol::Ext::SHAPE.3
Manifying blib/man3/X11::Protocol::Ext::XC_MISC.3
Manifying blib/man3/X11::Protocol.3
Manifying blib/man3/X11::Protocol::Ext::BIG_REQUESTS.3
Manifying blib/man3/X11::Protocol::Connection::UNIXFH.3
Manifying blib/man3/X11::Protocol::Connection::INETSocket.3
Manifying blib/man3/X11::Keysyms.3
Manifying blib/man3/X11::Protocol::Ext::XFree86_Misc.3
Manifying blib/man3/X11::Protocol::Connection::Socket.3
Manifying blib/man3/X11::Auth.3
Manifying blib/man3/X11::Protocol::Connection::UNIXSocket.3
Manifying blib/man3/X11::Protocol::Ext::DPMS.3
Manifying blib/man3/X11::Protocol::Ext::RENDER.3
Manifying blib/man3/X11::Protocol::Connection::INETFH.3
Manifying blib/man3/X11::Protocol::Connection.3
Manifying blib/man3/X11::Protocol::Connection::FileHandle.3
[ERROR] [Wed Jun 29 04:16:29 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare/perl-5.12.0/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..3
ok 1
Can't find DISPLAY -- guessing `unix:0' at test.pl line 32
Can't connect to display `unix:0': No such file or directory at blib/lib/X11/Protocol.pm line 2264
*** Error code 2
Stop in /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/X11-Protocol-0.56.
[MSG] [Wed Jun 29 04:16:29 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9105
CPANPLUS::Dist::Build 0.56
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.91
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.62.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/pkg/sbin:/usr/pkg/bin:/usr/pkg/xorg/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/X11-Protocol-0.56/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/X11-Protocol-0.56/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 47756
PERL5_CPANPLUS_IS_VERSION = 0.9105
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.12.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.12.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1003 1003
EGID: $) = 1003 1003
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 0) configuration:
Platform:
osname=dragonfly, osvers=2.10-release, archname=i386-dragonfly
uname='dragonfly diktat.bingosnet.co.uk 2.10-release dragonfly v2.10.1.1.gf7ba0-release #1: mon apr 25 19:48:10 utc 2011 root@pkgbox32.dragonflybsd.org:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.12.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Built under dragonfly
Compiled at Jun 16 2011 12:13:07
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/X11-Protocol-0.56/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/X11-Protocol-0.56/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="47756"
PERL5_CPANPLUS_IS_VERSION="0.9105"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.12.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/X11-Protocol-0.56/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/X11-Protocol-0.56/blib/arch
/usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/i386-dragonfly
/usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0
/usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/i386-dragonfly
/usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0
.