Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: PASS POE-1.362 v5.16.1 NetBSD
Date: 2014-07-15T00:37:55Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear RCAPUTO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9152. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
/home/cpan/pit/thr/perl-5.16.1/bin/perl mylib/gen-tests.perl lib/POE.pm
PERL_DL_NONLAZY=1 /home/cpan/pit/thr/perl-5.16.1/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/*/*/*.t
# Testing POE 1.362, POE::Test::Loops 1.358, Perl 5.016001, /home/cpan/pit/thr/perl-5.16.1/bin/perl on netbsd
# pogomips: 16731019
t/00_info.t ........................................ ok
t/10_units/01_pod/01_pod.t ......................... skipped: enable by setting RELEASE_TESTING
t/10_units/01_pod/02_pod_coverage.t ................ skipped: enable by setting RELEASE_TESTING
t/10_units/01_pod/03_pod_no404s.t .................. skipped: enable by setting RELEASE_TESTING
t/10_units/01_pod/04_pod_linkcheck.t ............... skipped: enable by setting RELEASE_TESTING
t/10_units/02_pipes/01_base.t ...................... skipped: not implemented yet
t/10_units/02_pipes/02_oneway.t .................... ok
t/10_units/02_pipes/03_twoway.t .................... ok
t/10_units/03_base/01_poe.t ........................ ok
t/10_units/03_base/03_component.t .................. ok
t/10_units/03_base/04_driver.t ..................... ok
t/10_units/03_base/05_filter.t ..................... ok
t/10_units/03_base/06_loop.t ....................... ok
t/10_units/03_base/07_queue.t ...................... ok
t/10_units/03_base/08_resource.t ................... ok
t/10_units/03_base/09_resources.t .................. ok
t/10_units/03_base/10_wheel.t ...................... ok
t/10_units/03_base/11_assert_usage.t ............... ok
t/10_units/03_base/12_assert_retval.t .............. ok
t/10_units/03_base/13_assert_data.t ................ ok
t/10_units/03_base/14_kernel.t ..................... ok
t/10_units/03_base/15_kernel_internal.t ............ ok
t/10_units/03_base/16_nfa_usage.t .................. ok
t/10_units/03_base/17_detach_start.t ............... ok
t/10_units/04_drivers/01_sysrw.t ................... ok
t/10_units/05_filters/01_block.t ................... ok
t/10_units/05_filters/02_grep.t .................... ok
t/10_units/05_filters/03_http.t .................... skipped: HTTP::Request is needed for these tests.
t/10_units/05_filters/04_line.t .................... ok
t/10_units/05_filters/05_map.t ..................... ok
t/10_units/05_filters/06_recordblock.t ............. ok
t/10_units/05_filters/07_reference.t ............... ok
t/10_units/05_filters/08_stream.t .................. ok
t/10_units/05_filters/50_stackable.t ............... ok
t/10_units/05_filters/51_reference_die.t ........... skipped: YAML module not available
t/10_units/05_filters/99_filterchange.t ............ ok
t/10_units/06_queues/01_array.t .................... ok
t/10_units/07_exceptions/01_normal.t ............... ok
t/10_units/07_exceptions/02_turn_off.t ............. ok
t/10_units/07_exceptions/03_not_handled.t .......... ok
t/10_units/08_loops/01_explicit_loop.t ............. ok
t/10_units/08_loops/02_explicit_loop_fail.t ........ ok
t/10_units/08_loops/03_explicit_loop_poll.t ........ ok
t/10_units/08_loops/04_explicit_loop_envvar.t ...... ok
t/10_units/08_loops/05_kernel_loop.t ............... ok
t/10_units/08_loops/06_kernel_loop_poll.t .......... ok
t/10_units/08_loops/07_kernel_loop_fail.t .......... ok
t/10_units/08_loops/08_kernel_loop_search_poll.t ... ok
t/10_units/08_loops/09_naive_loop_load.t ........... ok
t/10_units/08_loops/10_naive_loop_load_poll.t ...... ok
t/10_units/08_loops/11_double_loop.t ............... ok
t/20_resources/10_perl/aliases.t ................... ok
t/20_resources/10_perl/caller_state.t .............. ok
t/20_resources/10_perl/events.t .................... ok
t/20_resources/10_perl/extrefs.t ................... ok
t/20_resources/10_perl/extrefs_gc.t ................ ok
t/20_resources/10_perl/filehandles.t ............... ok
t/20_resources/10_perl/sessions.t .................. ok
t/20_resources/10_perl/sids.t ...................... ok
t/20_resources/10_perl/signals.t ................... ok
# Testing POE 1.362, POE::Test::Loops 1.358, Using Loop(POE::Loop::IO_Poll), Perl 5.016001, /home/cpan/pit/thr/perl-5.16.1/bin/perl on netbsd
t/30_loops/io_poll/00_info.t ....................... ok
t/30_loops/io_poll/all_errors.t .................... skipped: most of these should move into other test files
t/30_loops/io_poll/comp_tcp.t ...................... ok
# You might see a 'disconnect' error during this test.
# It may be ignored.
t/30_loops/io_poll/comp_tcp_concurrent.t ........... ok
t/30_loops/io_poll/connect_errors.t ................ ok
t/30_loops/io_poll/k_alarms.t ...................... ok
t/30_loops/io_poll/k_aliases.t ..................... ok
t/30_loops/io_poll/k_detach.t ...................... ok
t/30_loops/io_poll/k_run_returns.t ................. ok
t/30_loops/io_poll/k_selects.t ..................... ok
t/30_loops/io_poll/k_sig_child.t ................... ok
t/30_loops/io_poll/k_signals.t ..................... ok
t/30_loops/io_poll/k_signals_rerun.t ............... ok
t/30_loops/io_poll/sbk_signal_init.t ............... ok
t/30_loops/io_poll/ses_nfa.t ....................... ok
# This test generates some STDERR during trace testing.
=== 2852 === 23 -> _start (from /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/lib/POE/Kernel.pm at 1479)
=== 2852 === 23 -> woot (from /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/lib/POE/Test/Loops/ses_session.pm at 691)
=== 2852 === 23 -> narf (from /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/lib/POE/Test/Loops/ses_session.pm at 692)
t/30_loops/io_poll/ses_session.t ................... ok
=== 2852 === 23 -> _stop (from /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/lib/POE/Resource/Sessions.pm at 571)
t/30_loops/io_poll/wheel_accept.t .................. ok
t/30_loops/io_poll/wheel_curses.t .................. skipped: Curses not available
t/30_loops/io_poll/wheel_readline.t ................ skipped: This test requires Term::ReadKey
t/30_loops/io_poll/wheel_readwrite.t ............... ok
t/30_loops/io_poll/wheel_run.t ..................... ok
t/30_loops/io_poll/wheel_run_size.t ................ skipped: This test requires Term::Size
t/30_loops/io_poll/wheel_sf_ipv6.t ................. skipped: Socket::GetAddrInfo is needed for IPv6 tests
t/30_loops/io_poll/wheel_sf_tcp.t .................. ok
t/30_loops/io_poll/wheel_sf_udp.t .................. ok
t/30_loops/io_poll/wheel_sf_unix.t ................. ok
t/30_loops/io_poll/wheel_tail.t .................... ok
t/30_loops/io_poll/z_kogman_sig_order.t ............ ok
t/30_loops/io_poll/z_leolo_wheel_run.t ............. ok
# Using '/usr/bin/true' as our thing to run under system()
t/30_loops/io_poll/z_merijn_sigchld_system.t ....... ok
t/30_loops/io_poll/z_rt39872_sigchld.t ............. ok
# Parent 2314 waiting 3sec for slow systems to settle.
# sending sigusr1
# sent sigusr1
t/30_loops/io_poll/z_rt39872_sigchld_stop.t ........ ok
t/30_loops/io_poll/z_rt53302_fh_watchers.t ......... ok
t/30_loops/io_poll/z_rt54319_bazerka_followtail.t .. ok
t/30_loops/io_poll/z_steinert_signal_integrity.t ... ok
# Testing POE 1.362, POE::Test::Loops 1.358, Using Loop(POE::Loop::Select), Perl 5.016001, /home/cpan/pit/thr/perl-5.16.1/bin/perl on netbsd
t/30_loops/select/00_info.t ........................ ok
t/30_loops/select/all_errors.t ..................... skipped: most of these should move into other test files
t/30_loops/select/comp_tcp.t ....................... ok
# You might see a 'disconnect' error during this test.
# It may be ignored.
t/30_loops/select/comp_tcp_concurrent.t ............ ok
t/30_loops/select/connect_errors.t ................. ok
t/30_loops/select/k_alarms.t ....................... ok
t/30_loops/select/k_aliases.t ...................... ok
t/30_loops/select/k_detach.t ....................... ok
t/30_loops/select/k_run_returns.t .................. ok
t/30_loops/select/k_selects.t ...................... ok
t/30_loops/select/k_sig_child.t .................... ok
t/30_loops/select/k_signals.t ...................... ok
t/30_loops/select/k_signals_rerun.t ................ ok
t/30_loops/select/sbk_signal_init.t ................ ok
t/30_loops/select/ses_nfa.t ........................ ok
# This test generates some STDERR during trace testing.
=== 2849 === 23 -> _start (from /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/lib/POE/Kernel.pm at 1479)
=== 2849 === 23 -> woot (from /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/lib/POE/Test/Loops/ses_session.pm at 691)
=== 2849 === 23 -> narf (from /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/lib/POE/Test/Loops/ses_session.pm at 692)
t/30_loops/select/ses_session.t .................... ok
=== 2849 === 23 -> _stop (from /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/lib/POE/Resource/Sessions.pm at 571)
t/30_loops/select/wheel_accept.t ................... ok
t/30_loops/select/wheel_curses.t ................... skipped: Curses not available
t/30_loops/select/wheel_readline.t ................. skipped: This test requires Term::ReadKey
t/30_loops/select/wheel_readwrite.t ................ ok
t/30_loops/select/wheel_run.t ...................... ok
t/30_loops/select/wheel_run_size.t ................. skipped: This test requires Term::Size
t/30_loops/select/wheel_sf_ipv6.t .................. skipped: Socket::GetAddrInfo is needed for IPv6 tests
t/30_loops/select/wheel_sf_tcp.t ................... ok
t/30_loops/select/wheel_sf_udp.t ................... ok
t/30_loops/select/wheel_sf_unix.t .................. ok
t/30_loops/select/wheel_tail.t ..................... ok
t/30_loops/select/z_kogman_sig_order.t ............. ok
t/30_loops/select/z_leolo_wheel_run.t .............. ok
# Using '/usr/bin/true' as our thing to run under system()
t/30_loops/select/z_merijn_sigchld_system.t ........ ok
t/30_loops/select/z_rt39872_sigchld.t .............. ok
# Parent 16856 waiting 3sec for slow systems to settle.
# sending sigusr1
# sent sigusr1
t/30_loops/select/z_rt39872_sigchld_stop.t ......... ok
t/30_loops/select/z_rt53302_fh_watchers.t .......... ok
t/30_loops/select/z_rt54319_bazerka_followtail.t ... ok
t/30_loops/select/z_steinert_signal_integrity.t .... ok
t/90_regression/agaran-filter-httpd.t .............. skipped: - HTTP::Request needed to test POE::Filter::HTTPD
t/90_regression/averell-callback-ret.t ............. ok
t/90_regression/bingos-followtail.t ................ ok
t/90_regression/broeren-win32-nbio.t ............... skipped: This test examines ActiveState Perl behavior.
t/90_regression/cfedde-filter-httpd.t .............. skipped: - HTTP::Request needed to test POE::Filter::HTTPD
t/90_regression/ferrari-server-unix.t .............. ok
Died at t/90_regression/hinrik-wheel-run-die.t line 21.
t/90_regression/hinrik-wheel-run-die.t ............. ok
# This test can take up to 10 seconds
t/90_regression/kjeldahl-stop-start-polling.t ...... ok
# This test can take up to 10 seconds
t/90_regression/kjeldahl-stop-start-sig-nopipe.t ... ok
# This test can take up to 10 seconds
t/90_regression/kjeldahl-stop-start-sig-pipe.t ..... ok
t/90_regression/leolo-sig-die.t .................... ok
t/90_regression/meh-startstop-return.t ............. ok
t/90_regression/neyuki_detach.t .................... ok
t/90_regression/pipe-followtail.t .................. ok
t/90_regression/prumike-win32-stat.t ............... skipped: This test examines Strawberry/ActiveState Perl behavior.
t/90_regression/rt14444-arg1.t ..................... ok
t/90_regression/rt1648-tied-stderr.t ............... ok
t/90_regression/rt19908-merlyn-stop.t .............. ok
t/90_regression/rt23181-sigchld-rc.t ............... ok
t/90_regression/rt47966-sigchld.t .................. skipped: enable by setting RELEASE_TESTING
t/90_regression/rt56417-wheel-run.t ................ ok
t/90_regression/rt65460-forking.t .................. ok
t/90_regression/socketfactory-timeout.t ............ ok
t/90_regression/somni-poco-server-tcp.t ............ ok
t/90_regression/steinert-passed-wheel.t ............ ok
t/90_regression/suzman_windows.t ................... ok
t/90_regression/ton-stop-corruption.t .............. ok
t/90_regression/tracing-sane-exit.t ................ ok
t/90_regression/whelan-dieprop.t ................... ok
t/90_regression/whjackson-followtail.t ............. ok
All tests successful.
Files=160, Tests=4068, 109 wallclock secs ( 0.88 usr 0.30 sys + 20.30 cusr 5.83 csys = 27.31 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.26 0
Exporter 5.66 0
File::Spec 3.47 0.87
IO 1.25_06 1.24
IO::Handle 1.33 1.27
IO::Pipely 0.005 0.005
IO::Tty 1.11 1.08
POE::Test::Loops 1.358 1.356
POSIX 1.30 1.02
Socket 2.001 1.7
Storable 2.51 2.16
Test::Harness 3.32 2.26
Time::HiRes 1.9726 1.59
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9152
CPANPLUS::Dist::Build 0.78
Cwd 3.47
ExtUtils::CBuilder 0.280216
ExtUtils::Command 1.17
ExtUtils::Install 1.68
ExtUtils::MakeMaker 6.98
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.24
File::Spec 3.47
Module::Build 0.4205
Pod::Parser 1.51
Pod::Simple 3.20
Test::Harness 3.32
Test::More 1.001003
version 0.9908
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/script:/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Exporter-5.70/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Exporter-5.70/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Scalar-List-Utils-1.39/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Scalar-List-Utils-1.39/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Pipely-0.005/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Pipely-0.005/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Tty-1.11/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Tty-1.11/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 22154
PERL5_CPANPLUS_IS_VERSION = 0.9152
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.16.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.16.1/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 16 subversion 1) configuration:
Platform:
osname=netbsd, osvers=6.1.4, archname=amd64-netbsd-thread-multi
uname='netbsd naboo.bingosnet.co.uk 6.1.4 netbsd 6.1.4 (generic) amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.16.1 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include'
ccversion='', gccversion='4.5.3', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under netbsd
Compiled at May 9 2014 21:34:50
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Exporter-5.70/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Exporter-5.70/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Scalar-List-Utils-1.39/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Scalar-List-Utils-1.39/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Pipely-0.005/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Pipely-0.005/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Tty-1.11/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Tty-1.11/blib/arch:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="22154"
PERL5_CPANPLUS_IS_VERSION="0.9152"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.16.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/lib
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-Test-Loops-1.358/blib/arch
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Exporter-5.70/blib/lib
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Exporter-5.70/blib/arch
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Scalar-List-Utils-1.39/blib/lib
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/Scalar-List-Utils-1.39/blib/arch
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Pipely-0.005/blib/lib
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Pipely-0.005/blib/arch
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Tty-1.11/blib/lib
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/IO-Tty-1.11/blib/arch
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/lib
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/POE-1.362/blib/arch
/home/cpan/pit/thr/perl-5.16.1/lib/site_perl/5.16.1/amd64-netbsd-thread-multi
/home/cpan/pit/thr/perl-5.16.1/lib/site_perl/5.16.1
/home/cpan/pit/thr/perl-5.16.1/lib/5.16.1/amd64-netbsd-thread-multi
/home/cpan/pit/thr/perl-5.16.1/lib/5.16.1
.