Back
From: Chris Williams (BINGOS)
Subject: FAIL my_app-0.01 v5.20.2 Debian GNU/kFreeBSD
Date: 2015-02-20T10:36:04Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear DGRAEVEJ,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9152. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/rel/perl-5.20.2/bin/perl5.20.2" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test '200 OK'
# at t/basic.t line 7.
# got: '404'
# expected: '200'
# Looks like you failed 1 test of 3.
t/basic.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/3 subtests
Test Summary Report
-------------------
t/basic.t (Wstat: 256 Tests: 3 Failed: 1)
Failed test: 2
Non-zero exit status: 1
Files=1, Tests=3, 1 wallclock secs ( 0.00 usr 0.02 sys + 0.33 cusr 0.05 csys = 0.40 CPU)
Result: FAIL
Failed 1/1 test programs. 1/3 subtests failed.
make: *** [test_dynamic] Error 1
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.04 0
Mojolicious 5.80 5.77
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9152
CPANPLUS::Dist::Build 0.78
Cwd 3.48_01
ExtUtils::CBuilder 0.280220
ExtUtils::Command 1.18
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.04
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.24
File::Spec 3.48_01
Module::Build 0.4211
Pod::Parser 1.62
Pod::Simple 3.28
Test::Harness 3.35
Test::More 1.001014
version 0.9912
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.90.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mojolicious-5.80/blib/script:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = :/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mojolicious-5.80/blib/lib:/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mojolicious-5.80/blib/arch:/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/my_app-0.01/blib/lib:/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/my_app-0.01/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 61173
PERL5_CPANPLUS_IS_VERSION = 0.9152
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /home/cpan/pit/rel/conf/perl-5.20.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/rel/perl-5.20.2/bin/perl5.20.2
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 20 subversion 2) configuration:
Platform:
osname=gnukfreebsd, osvers=8.1-1-686, archname=i686-gnukfreebsd-thread-multi-64int
uname='gnukfreebsd kaiser 8.1-1-686 #0 sun feb 17 17:09:24 utc 2013 i686 i386 intel(r) pentium(r) cpu g840 @ 2.80ghz gnukfreebsd '
config_args='-des -Dprefix=/home/cpan/pit/rel/perl-5.20.2 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/i486-kfreebsd-gnu/4.4.5/include-fixed /usr/lib /lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/usr/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.3'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.30
Built under gnukfreebsd
Compiled at Feb 19 2015 13:31:10
%ENV:
PERL5LIB=":/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mojolicious-5.80/blib/lib:/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mojolicious-5.80/blib/arch:/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/my_app-0.01/blib/lib:/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/my_app-0.01/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="61173"
PERL5_CPANPLUS_IS_VERSION="0.9152"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/home/cpan/pit/rel/conf/perl-5.20.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mojolicious-5.80/blib/lib
/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mojolicious-5.80/blib/arch
/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/my_app-0.01/blib/lib
/home/cpan/pit/rel/conf/perl-5.20.2/.cpanplus/5.20.2/build/my_app-0.01/blib/arch
/home/cpan/pit/rel/perl-5.20.2/lib/site_perl/5.20.2/i686-gnukfreebsd-thread-multi-64int
/home/cpan/pit/rel/perl-5.20.2/lib/site_perl/5.20.2
/home/cpan/pit/rel/perl-5.20.2/lib/5.20.2/i686-gnukfreebsd-thread-multi-64int
/home/cpan/pit/rel/perl-5.20.2/lib/5.20.2
.