Report for POE-Loop-Kqueue-0.02

Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: UNKNOWN POE-Loop-Kqueue-0.02 v5.13.7 Dragonfly BSD
Date: 2010-12-06T12:49:36Z

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear GDSL,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9010. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'fetch':

[ERROR] [Mon Dec  6 12:49:36 2010] MAKE failed: No such file or directory cp Kqueue.pm blib/lib/POE/Loop/Kqueue.pm
/usr/home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7 /usr/home/cpan/pit/thr/perl-5.13.7/lib/5.13.7/ExtUtils/xsubpp  -typemap /usr/home/cpan/pit/thr/perl-5.13.7/lib/5.13.7/ExtUtils/typemap  Kqueue.xs > Kqueue.xsc && mv Kqueue.xsc Kqueue.c
cc -c    -Wall -Wpointer-arith -Winline -Wstrict-prototypes -Wconversion -O    -DVERSION=\"0.02\"  -DXS_VERSION=\"0.02\" -DPIC -fPIC "-I/usr/home/cpan/pit/thr/perl-5.13.7/lib/5.13.7/x86_64-dragonfly-thread-multi/CORE"   Kqueue.c
In file included from Kqueue.xs:20:
ppport.h:2979:1: warning: "PERL_UNUSED_DECL" redefined
In file included from Kqueue.xs:9:
/usr/home/cpan/pit/thr/perl-5.13.7/lib/5.13.7/x86_64-dragonfly-thread-multi/CORE/perl.h:328:1: warning: this is the location of the previous definition
Kqueue.xs:181: error: 'void' must be the only parameter
Kqueue.xs: In function 'kevent_update':
Kqueue.xs:191: warning: passing argument 1 of 'Perl_croak_nocontext' from incompatible pointer type
Kqueue.xs: In function 'do_timeslice':
Kqueue.xs:308: warning: passing argument 1 of 'Perl_croak_nocontext' from incompatible pointer type
Kqueue.xs:343: warning: passing argument 1 of 'strerror' with different width due to prototype
Kqueue.xs:343: warning: passing argument 1 of 'Perl_croak_nocontext' from incompatible pointer type
Kqueue.xs:367: warning: passing argument 1 of 'Perl_croak_nocontext' from incompatible pointer type
Kqueue.c: In function 'XS_POE__Kernel_CLONE':
Kqueue.c:519: warning: unused variable 'items'
Kqueue.c:519: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_initialize':
Kqueue.xs:483: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.xs:483: error: (Each undeclared identifier is reported only once
Kqueue.xs:483: error: for each function it appears in.)
Kqueue.c:538: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_finalize':
Kqueue.xs:513: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:582: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_resume_time_watcher':
Kqueue.xs:535: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:619: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_reset_time_watcher':
Kqueue.xs:548: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:646: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_pause_time_watcher':
Kqueue.xs:562: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:673: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_watch_filehandle':
Kqueue.xs:579: warning: passing argument 2 of 'push_event' with different width due to prototype
Kqueue.xs:579: warning: passing argument 6 of 'push_event' with different width due to prototype
Kqueue.xs:581: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:699: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_ignore_filehandle':
Kqueue.xs:605: warning: passing argument 2 of 'push_event' with different width due to prototype
Kqueue.xs:605: warning: passing argument 6 of 'push_event' with different width due to prototype
Kqueue.c:739: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_pause_filehandle':
Kqueue.xs:632: warning: passing argument 2 of 'push_event' with different width due to prototype
Kqueue.xs:632: warning: passing argument 6 of 'push_event' with different width due to prototype
Kqueue.xs:634: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:780: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_resume_filehandle':
Kqueue.xs:660: warning: passing argument 2 of 'push_event' with different width due to prototype
Kqueue.xs:660: warning: passing argument 6 of 'push_event' with different width due to prototype
Kqueue.xs:662: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:822: warning: unused variable 'Perl___notused'
Kqueue.c: In function 'XS_POE__Kernel_loop_do_timeslice':
Kqueue.c:864: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_run':
Kqueue.xs:694: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:887: warning: unused variable 'Perl___notused'
Kqueue.xs: In function 'XS_POE__Kernel_loop_halt':
Kqueue.xs:733: error: 'my_cxtp' undeclared (first use in this function)
Kqueue.c:941: warning: unused variable 'Perl___notused'
Kqueue.c: In function 'boot_POE__Loop__Kqueue':
Kqueue.c:985: warning: passing argument 2 of 'Perl_xs_version_bootcheck' as unsigned due to prototype
Kqueue.c:985: warning: passing argument 3 of 'Perl_xs_version_bootcheck' as unsigned due to prototype
Kqueue.xs:455: warning: passing argument 3 of 'Perl_newSVpv' with different width due to prototype
Kqueue.xs:456: warning: passing argument 3 of 'Perl_newSVpv' with different width due to prototype
Kqueue.xs:457: warning: passing argument 3 of 'Perl_newSVpv' with different width due to prototype
Kqueue.xs:458: warning: passing argument 3 of 'Perl_newSVpv' with different width due to prototype
Kqueue.xs:459: warning: passing argument 3 of 'Perl_newSVpv' with different width due to prototype
Kqueue.c:970: warning: unused variable 'Perl___notused'
*** Error code 1

Stop in /usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-Loop-Kqueue-0.02.


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  ExtUtils::MakeMaker             6.57_05        0
	  POE                               1.294   0.3009

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9010
	CPANPLUS::Dist::Build              0.50
	Cwd                                3.34
	ExtUtils::CBuilder               0.2703
	ExtUtils::Command                  1.16
	ExtUtils::Install                  1.55
	ExtUtils::MakeMaker             6.57_05
	ExtUtils::Manifest                 1.58
	ExtUtils::ParseXS                2.2207
	File::Spec                         3.33
	Module::Build                    0.3607
	Test::Harness                      3.22
	Test::More                      0.97_01
	version                            0.85

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.58.
Powered by minismokebox version 0.36

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/pkg/sbin:/usr/pkg/bin:/usr/pkg/xorg/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
    PERL5LIB = :/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/IO-Tty-1.10/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/IO-Tty-1.10/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-Test-Loops-1.036/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-Test-Loops-1.036/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-1.294/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-1.294/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 84331
    PERL5_CPANPLUS_IS_VERSION = 0.9010
    PERL5_MINISMOKEBOX = 0.36
    PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.13.7
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 1002 1002
    EGID: $)  = 1002 1002


-------------------------------


--

Summary of my perl5 (revision 5 version 13 subversion 7) configuration:
   
  Platform:
    osname=dragonfly, osvers=2.6-release, archname=x86_64-dragonfly-thread-multi
    uname='dragonfly ddraig64.bingosnet.co.uk 2.6-release dragonfly v2.6.3-release #10: mon may 3 09:57:53 pdt 2010 root@pkgbox64.dragonflybsd.org:usrobjusrsrc-miscsysx86_64_generic x86_64 '
    config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.13.7 -Dusethreads -Dusedevel'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
    optimize='-O',
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
    ccversion='', gccversion='4.1.2 (DragonFly)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -fstack-protector -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib
    libs=-lm -lcrypt -lutil -lc
    perllibs=-lm -lcrypt -lutil -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
                        PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP PERL_USE_DEVEL
                        USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
                        USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
                        USE_REENTRANT_API
  Built under dragonfly
  Compiled at Nov 25 2010 10:29:50
  %ENV:
    PERL5LIB=":/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/IO-Tty-1.10/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/IO-Tty-1.10/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-Test-Loops-1.036/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-Test-Loops-1.036/blib/arch:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-1.294/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-1.294/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="84331"
    PERL5_CPANPLUS_IS_VERSION="0.9010"
    PERL5_MINISMOKEBOX="0.36"
    PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.13.7"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/IO-Tty-1.10/blib/lib
    /usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/IO-Tty-1.10/blib/arch
    /usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-Test-Loops-1.036/blib/lib
    /usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-Test-Loops-1.036/blib/arch
    /usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-1.294/blib/lib
    /usr/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/POE-1.294/blib/arch
    /usr/home/cpan/pit/thr/perl-5.13.7/lib/site_perl/5.13.7/x86_64-dragonfly-thread-multi
    /usr/home/cpan/pit/thr/perl-5.13.7/lib/site_perl/5.13.7
    /usr/home/cpan/pit/thr/perl-5.13.7/lib/5.13.7/x86_64-dragonfly-thread-multi
    /usr/home/cpan/pit/thr/perl-5.13.7/lib/5.13.7
    .