Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL VFSsimple-0.03 v5.10.1 OpenBSD
Date: 2011-06-06T00:59:53Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Olivier Thauvin,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9105. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Jun 6 01:59:49 2011] Module 'VFSsimple::Drv::Ftp' requires 'VFSsimple::Base' version '0.0' to be installed
[MSG] [Mon Jun 6 01:59:50 2011] Using cached file '/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/authors/id/N/NA/NANARDON/VFSsimple/CHECKSUMS' on disk; ttl (3600s) is not exceeded
[MSG] [Mon Jun 6 01:59:50 2011] Checksum matches for 'VFSsimple-0.03.tar.gz'
[MSG] [Mon Jun 6 01:59:51 2011] Extracted 'VFSsimple::Base' to '/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03'
[MSG] [Mon Jun 6 01:59:51 2011] CPANPLUS is prefering Build.PL
[MSG] [Mon Jun 6 01:59:51 2011] Checking if your kit is complete...
Looks good
Writing Makefile for VFSsimple
[MSG] [Mon Jun 6 01:59:51 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Jun 6 01:59:51 2011] Checking for previous PASS result for "VFSsimple-0.03"
[MSG] [Mon Jun 6 01:59:53 2011] cp lib/VFSsimple.pm blib/lib/VFSsimple.pm
cp lib/VFSsimple/Base.pm blib/lib/VFSsimple/Base.pm
cp bin/vfsget blib/script/vfsget
/home/cpan/pit/thr/perl-5.10.1/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/vfsget
cp bin/listmedia blib/script/listmedia
/home/cpan/pit/thr/perl-5.10.1/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/listmedia
Manifying blib/man3/VFSsimple.3
Manifying blib/man3/VFSsimple::Base.3
[ERROR] [Mon Jun 6 01:59:53 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/pit/thr/perl-5.10.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01.t ..............
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
# Failed test 'use VFSsimple;'
# at t/01.t line 5.
# Tried to use 'VFSsimple'.
# Error: Can't locate URI.pm in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/arch /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/arch /home/cpan/pit/thr/perl-5.10.1/lib/5.10.1/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.10.1/lib/5.10.1 /home/cpan/pit/thr/perl-5.10.1/lib/site_perl/5.10.1/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib/VFSsimple.pm line 5.
# BEGIN failed--compilation aborted at /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib/VFSsimple.pm line 5.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Looks like you failed 1 test of 1.
Can't locate URI.pm in @INC (@INC contains: /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/arch /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/arch /home/cpan/pit/thr/perl-5.10.1/lib/5.10.1/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.10.1/lib/5.10.1 /home/cpan/pit/thr/perl-5.10.1/lib/site_perl/5.10.1/OpenBSD.amd64-openbsd-thread-multi /home/cpan/pit/thr/perl-5.10.1/lib/site_perl/5.10.1 .) at /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib/VFSsimple.pm line 5.
BEGIN failed--compilation aborted at /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib/VFSsimple.pm line 5.
Compilation failed in require at (eval 9) line 3.
...propagated at /home/cpan/pit/thr/perl-5.10.1/lib/5.10.1/base.pm line 94.
BEGIN failed--compilation aborted at /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib/VFSsimple/Base.pm line 7.
Compilation failed in require at t/02-instanciate.t line 5.
BEGIN failed--compilation aborted at t/02-instanciate.t line 5.
t/02-instanciate.t ..
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Test Summary Report
-------------------
t/01.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/02-instanciate.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=2, Tests=1, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.06 cusr 0.02 csys = 0.12 CPU)
Result: FAIL
*** Error code 2
Stop in /home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03 (line 800 of Makefile).
Failed 2/2 test programs. 1/1 subtests failed.
[MSG] [Mon Jun 6 01:59:53 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
URI
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Olivier Thauvin (nanardon@nanardon.zarb.org)',
... # other information
PREREQ_PM => {
'URI' => '0', # or a minimum working version
}
);
Thanks! :-)
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9105
CPANPLUS::Dist::Build 0.56
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.88
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.62.
Powered by minismokebox version 0.48
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib:/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 31455
PERL5_CPANPLUS_IS_VERSION = 0.9105
PERL5_MINISMOKEBOX = 0.48
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.10.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.10.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
Platform:
osname=openbsd, osvers=4.9, archname=OpenBSD.amd64-openbsd-thread-multi
uname='openbsd ostrich.bingosnet.co.uk 4.9 generic#477 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.10.1 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd4.9'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.58.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY MYMALLOC PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API
Built under openbsd
Compiled at May 4 2011 19:47:46
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib:/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="31455"
PERL5_CPANPLUS_IS_VERSION="0.9105"
PERL5_MINISMOKEBOX="0.48"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.10.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/lib
/home/cpan/pit/thr/conf/perl-5.10.1/.cpanplus/5.10.1/build/VFSsimple-0.03/blib/arch
/home/cpan/pit/thr/perl-5.10.1/lib/5.10.1/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.10.1/lib/5.10.1
/home/cpan/pit/thr/perl-5.10.1/lib/site_perl/5.10.1/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.10.1/lib/site_perl/5.10.1
.