Biblio-RFID v0.05 Perl 5 v5.18.0 OpenBSD.amd64-openbsd-thread-multi
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Biblio-RFID v0.05
- Platform
- Perl 5 v5.18.0 OpenBSD.amd64-openbsd-thread-multi
- Date
- 2023-02-17 11:43:31
- ID
- 4d975844-aeb8-11ed-aba6-9a79f339625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear DPAVLIN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.18.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00-load.t t/05-RFID501.t t/06-SmartX.t t/10-3M-810.t t/20-CPR-M02.t t/30-librfid.t t/50-Readers.t t/boilerplate.t t/manifest.t t/pod.t t/readme.t
# Testing Biblio::RFID 0.05, Perl 5.018000, /home/cpan/pit/thr/perl-5.18.0/bin/perl
t/00-load.t ...... ok
## to_hash pack("H*","0411000032303039303130313031323300000000ffffffff7fffffff00000000") at lib/Biblio/RFID/RFID501.pm line 126.
# {
# branch => 4095,
# content => 200901010123,
# custom => 2147483647,
# library => 1048575,
# set => 1,
# total => 1,
# type => 0,
# type_label => "Other",
# u1 => 4,
# u2 => 0,
# }
## from_hash {
branch => 4095,
content => 200901010123,
custom => 2147483647,
library => 1048575,
set => 1,
total => 1,
type => 0,
type_label => "Other",
u1 => 4,
u2 => 0,
} at lib/Biblio/RFID/RFID501.pm line 157.
# (
# pack("H*","0411000032303039303130313031323300000000ffffffff7fffffff00000000"),
# pack("H*","0411000032303039303130313031323300000000ffffffff7fffffff00000000"),
# )
## to_hash "\4\21\0\x011302003767\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" at lib/Biblio/RFID/RFID501.pm line 126.
# {
# branch => 0,
# content => 1302003767,
# custom => 0,
# library => 0,
# set => 1,
# total => 1,
# type => 1,
# type_label => "Book",
# u1 => 4,
# u2 => 0,
# }
## from_hash {
branch => 0,
content => 1302003767,
custom => 0,
library => 0,
set => 1,
total => 1,
type => 1,
type_label => "Book",
u1 => 4,
u2 => 0,
} at lib/Biblio/RFID/RFID501.pm line 157.
# (
# "\4\21\0\x011302003767\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0",
# "\4\21\0\x011302003767\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0",
# )
# "\0\0\0\0\0\0\0\0\0\0\0\0"
t/05-RFID501.t ... ok
# 4: 99887766554433221100001222222221 at lib/Biblio/RFID/SmartX.pm line 35.
# 5: 32303133343536319111111111906d00 at lib/Biblio/RFID/SmartX.pm line 35.
# 6: 33333300000000060030325352434504 at lib/Biblio/RFID/SmartX.pm line 35.
## hash = {
CARD_V => "0006",
INST_ID => 333333000000,
JMBAG => 1222222221,
OIB => 91111111119,
SPOL => "m",
SXID => "99887766554433221100",
} at lib/Biblio/RFID/SmartX.pm line 47.
# {
# CARD_V => "0006",
# INST_ID => 333333000000,
# JMBAG => 1222222221,
# OIB => 91111111119,
# SPOL => "m",
# SXID => "99887766554433221100",
# }
# 4: 00112233445566778899002111111112 at lib/Biblio/RFID/SmartX.pm line 35.
# 5: 32303134313030318111111111806600 at lib/Biblio/RFID/SmartX.pm line 35.
# 6: 32323200000000050030325352434504 at lib/Biblio/RFID/SmartX.pm line 35.
## hash = {
CARD_V => "0005",
INST_ID => 323232000000,
JMBAG => 2111111112,
OIB => 81111111118,
SPOL => "f",
SXID => "00112233445566778899",
} at lib/Biblio/RFID/SmartX.pm line 47.
# {
# CARD_V => "0005",
# INST_ID => 323232000000,
# JMBAG => 2111111112,
# OIB => 81111111118,
# SPOL => "f",
# SXID => "00112233445566778899",
# }
t/06-SmartX.t .... ok
# Failed test 'new'
# at t/10-3M-810.t line 12.
Can't call method "inventory" on an undefined value at t/10-3M-810.t line 14.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 2.
t/10-3M-810.t ....
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/2 subtests
# Failed test 'new'
# at t/20-CPR-M02.t line 12.
Can't call method "inventory" on an undefined value at t/20-CPR-M02.t line 14.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 2.
t/20-CPR-M02.t ...
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/2 subtests
Can't exec "librfid-tool": No such file or directory at lib/Biblio/RFID/Reader/librfid.pm line 53.
Can't exec "lsusb": No such file or directory at lib/Biblio/RFID/Reader/librfid.pm line 86.
Use of uninitialized value $lsusb in pattern match (m//) at lib/Biblio/RFID/Reader/librfid.pm line 87.
Use of uninitialized value $lsusb in concatenation (.) or string at lib/Biblio/RFID/Reader/librfid.pm line 92.
can't reset device at lib/Biblio/RFID/Reader/librfid.pm line 92.
# inventory = ()
t/30-librfid.t ... ok
Can't exec "librfid-tool": No such file or directory at lib/Biblio/RFID/Reader/librfid.pm line 53.
Can't exec "lsusb": No such file or directory at lib/Biblio/RFID/Reader/librfid.pm line 86.
Use of uninitialized value $lsusb in pattern match (m//) at lib/Biblio/RFID/Reader/librfid.pm line 87.
Use of uninitialized value $lsusb in concatenation (.) or string at lib/Biblio/RFID/Reader/librfid.pm line 92.
can't reset device at lib/Biblio/RFID/Reader/librfid.pm line 92.
# tags: []
t/50-Readers.t ... ok
t/boilerplate.t .. ok
t/manifest.t ..... skipped: Author tests not required for installation
t/pod.t .......... ok
t/readme.t ....... ok
Test Summary Report
-------------------
t/10-3M-810.t (Wstat: 65280 (exited 255) Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/20-CPR-M02.t (Wstat: 65280 (exited 255) Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
TODO passed: 1, 3
Files=11, Tests=44, 8 wallclock secs ( 0.21 usr 0.19 sys + 5.36 cusr 2.18 csys = 7.94 CPU)
Result: FAIL
Failed 2/11 test programs. 2/44 subtests failed.
*** Error 255 in /home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Hp0n7Zc9JJ/Biblio-RFID-0.05 (Makefile:815 'test_dynamic')
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.29 0
Data::Dump 1.25 0
Device::SerialPort 1.04 0
Digest::CRC 0.24 0
ExtUtils::MakeMaker 7.64 6.36
Pod::Readme v1.2.3 0
Test::More 1.302191 0
Time::HiRes 1.9725 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.60
Pod::Simple 3.28
Test2 1.302191
Test::Harness 3.44
Test::More 1.302191
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games
PERL5LIB = /home/cpan/pit/jail/K2XuLYxIu2/lib/perl5:/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Hp0n7Zc9JJ/Biblio-RFID-0.05/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Hp0n7Zc9JJ/Biblio-RFID-0.05/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 62499
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.18.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/K2XuLYxIu2
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/K2XuLYxIu2"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/K2XuLYxIu2
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.18.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 0) configuration:
Platform:
osname=openbsd, osvers=6.6, archname=OpenBSD.amd64-openbsd-thread-multi
uname='openbsd outrage.bingosnet.co.uk 6.6 generic#4 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.18.0 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible OpenBSD Clang 8.0.1 (tags/RELEASE_801/final)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.95.1, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.80
Built under openbsd
Compiled at Jan 23 2020 22:56:46
%ENV:
PERL5LIB="/home/cpan/pit/jail/K2XuLYxIu2/lib/perl5:/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Hp0n7Zc9JJ/Biblio-RFID-0.05/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Hp0n7Zc9JJ/Biblio-RFID-0.05/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="62499"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.18.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/K2XuLYxIu2"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/K2XuLYxIu2""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/K2XuLYxIu2"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/K2XuLYxIu2/lib/perl5/5.18.0/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/jail/K2XuLYxIu2/lib/perl5/5.18.0
/home/cpan/pit/jail/K2XuLYxIu2/lib/perl5/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/jail/K2XuLYxIu2/lib/perl5
/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Hp0n7Zc9JJ/Biblio-RFID-0.05/blib/lib
/home/cpan/pit/thr/conf/perl-5.18.0/.cpanplus/5.18.0/build/Hp0n7Zc9JJ/Biblio-RFID-0.05/blib/arch
/home/cpan/pit/thr/perl-5.18.0/lib/site_perl/5.18.0/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.18.0/lib/site_perl/5.18.0
/home/cpan/pit/thr/perl-5.18.0/lib/5.18.0/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.18.0/lib/5.18.0
.