PAR-Packer v1.062_001 Perl 5 v5.8.9 x86_64-linux-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
PAR-Packer v1.062_001
- Platform
- Perl 5 v5.8.9 x86_64-linux-thread-multi
- Date
- 2024-03-17 14:40:33
- ID
- 4f3b5796-e46c-11ee-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear RSCHUPP,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
make[1]: Entering directory '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/t/data/XSFoo'
"/home/cpan/pit/thr/perl-5.8.9/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XSFoo.bs ../blib/arch/auto/XSFoo/XSFoo.bs 644
make[1]: Leaving directory '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/t/data/XSFoo'
make[1]: Entering directory '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/myldr'
Makefile:838: warning: overriding recipe for target '.c.o'
Makefile:341: warning: ignoring old recipe for target '.c.o'
make[1]: Leaving directory '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/myldr'
make[1]: Entering directory '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/t/data/XSFoo'
"/home/cpan/pit/thr/perl-5.8.9/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- XSFoo.bs ../blib/arch/auto/XSFoo/XSFoo.bs 644
No tests defined for XSFoo extension.
make[1]: Leaving directory '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/t/data/XSFoo'
make[1]: Entering directory '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/myldr'
Makefile:838: warning: overriding recipe for target '.c.o'
Makefile:341: warning: ignoring old recipe for target '.c.o'
No tests defined for myldr extension.
make[1]: Leaving directory '/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/myldr'
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.8.9/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-pod.t ............... skipped: Set environment variable PERL_TEST_POD=1 to test POD
t/10-parl-generation.t ... ok
/tmp/1O1FA6DLtL syntax OK
t/20-pp.t ................ ok
t/30-current_exec.t ...... ok
t/40-packer_cd_option.t .. ok
t/80-doublecolon.t ....... ok
t/85-crt-glob.t .......... ok
t/85-myfile.t ............ ok
# greetings from XSFoo
# dl_shared_objects = /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/3dcc3b2c.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/7e52e070.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/eb236e7b.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/c61eb958.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/bb61dd9d.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/f6f58ab3.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/42107bcd.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/aa63af8c.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/1c5b3bf1.so /tmp/OGDe87K5Xi/par-6370616e/cache-cc336195746d97490d8acc871db13748bf147dd9/inc/lib/auto/XSFoo/XSFoo.so
# dl_modules = IO Fcntl Cwd Compress::Raw::Zlib List::Util Encode File::Glob Digest::SHA PerlIO::scalar XSFoo
t/86-xs-exe.t ............ ok
t/86-xs-par.t ............ ok
t/87-xs-cross.t .......... skipped: Tests only relevant on Windows
t/90-exitcode.t .......... ok
t/90-gh41.t .............. skipped: Tests only relevant on Windows
t/90-gh66.t .............. ok
# PAR_TEMP = /tmp/rXiDZ40i52/par-6370616e/cache-0caa8f677c8df29e5bcc2a9acba62d0db5c36695
# running /tmp/rXiDZ40i52/pp000 a second time
# running /tmp/rXiDZ40i52/pp000 a third time
t/90-rt101800.t .......... ok
t/90-rt103861.t .......... ok
t/90-rt104560.t .......... ok
t/90-rt104635.t .......... ok
t/90-rt122949.t .......... skipped: Tests only relevant on Windows
t/90-rt127064.t .......... skipped: Tests only relevant on Windows
t/90-rt129312.t .......... ok
# found core module Carp in /home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/Carp.pm
# found core module Exporter in /home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/Exporter.pm
# found core module File::Glob in /home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/x86_64-linux-thread-multi/File/Glob.pm
# found core module List::Util in /home/cpan/pit/jail/X09z2ofUIE/lib/perl5/x86_64-linux-thread-multi/List/Util.pm
t/90-rt130685.t .......... ok
t/90-rt59710.t ........... ok
All tests successful.
Files=23, Tests=158, 90 wallclock secs ( 0.07 usr 0.06 sys + 61.11 cusr 21.82 csys = 83.06 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Archive::Zip 1.68 1.02
Compress::Zlib 2.204 1.30
Digest::SHA 6.04 5.40
ExtUtils::MakeMaker 7.70 0
File::Temp 0.2311 0.05
Getopt::ArgvFile 1.11 1.07
IO::Compress::Gzip 2.204 0
IPC::Run3 0.049 0.048
Module::ScanDeps 1.35 1.21
PAR 1.020 1.020
PAR::Dist 0.52 0.22
Test::More 1.302195 0
Text::ParseWords 3.27 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4234
Pod::Parser 1.35
Pod::Simple 3.42
Test2 1.302195
Test::Harness 3.44
Test::More 1.302195
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/blib/script:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/X09z2ofUIE/lib/perl5:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 6388
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/X09z2ofUIE
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/X09z2ofUIE"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/X09z2ofUIE
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.8.9/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=5.10.16-0-lts, archname=x86_64-linux-thread-multi
uname='linux agaric 5.10.16-0-lts #1-alpine smp wed, 17 feb 2021 08:17:06 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.8.9 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe'
ccversion='', gccversion='10.2.1 20201203', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
libc=/usr/lib/libc.a, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
USE_64_BIT_ALL USE_64_BIT_INT USE_FAST_STDIO
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Mar 12 2021 11:02:56
%ENV:
PERL5LIB="/home/cpan/pit/jail/X09z2ofUIE/lib/perl5:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="6388"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/X09z2ofUIE"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/X09z2ofUIE""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/X09z2ofUIE"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/X09z2ofUIE/lib/perl5/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/jail/X09z2ofUIE/lib/perl5/5.8.9
/home/cpan/pit/jail/X09z2ofUIE/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/X09z2ofUIE/lib/perl5
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/blib/lib
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/24xlZTVZPa/PAR-Packer-1.062_001/blib/arch
/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9
/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9
.