Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: NA Sledge-Engine-0.03 v5.15.0 GNU/Linux
Date: 2011-08-08T16:27:30Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear IKEBE,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9109. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Aug 8 17:25:44 2011] cp lib/Module/Install/TestBase.pm blib/lib/Module/Install/TestBase.pm
cp lib/Test/Base/Filter.pm blib/lib/Test/Base/Filter.pm
cp lib/Test/Base.pm blib/lib/Test/Base.pm
Manifying blib/man3/Test::Base::Filter.3
Manifying blib/man3/Module::Install::TestBase.3
Manifying blib/man3/Test::Base.3
[MSG] [Mon Aug 8 17:25:44 2011] Sending test report for 'Test-Base-0.60'
[MSG] [Mon Aug 8 17:25:44 2011] Ok, not sending test report
[MSG] [Mon Aug 8 17:25:45 2011] cp lib/Sledge/Utils.pm blib/lib/Sledge/Utils.pm
Manifying blib/man3/Sledge::Utils.3
[MSG] [Mon Aug 8 17:25:45 2011] Sending test report for 'Sledge-Utils-0.04'
[MSG] [Mon Aug 8 17:25:45 2011] Ok, not sending test report
[MSG] [Mon Aug 8 17:25:45 2011] Building Sledge-Engine
[ERROR] [Mon Aug 8 17:25:45 2011] MAKE TEST failed:
# Failed test 'use Sledge::Engine;'
# at t/00-load.t line 6.
# Tried to use 'Sledge::Engine'.
# Error: Base class package "Class::Data::Inheritable" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/arch /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0 /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0).
# at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4
# BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Use of uninitialized value $Sledge::Engine::VERSION in concatenation (.) or string at t/00-load.t line 9.
# Testing Sledge::Engine , Perl 5.015000, /home/cpan/pit/bare/perl-5.15.0/bin/perl5.15.0
# Looks like you failed 1 test of 1.
t/00-load.t ....
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
# Failed test 'use MyApp;'
# at t/01-use.t line 7.
# Tried to use 'MyApp'.
# Error: Base class package "Class::Data::Inheritable" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains: ./t/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/arch /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0 /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0 .).
# at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4
# BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4.
# Compilation failed in require at t/lib/MyApp.pm line 3.
# BEGIN failed--compilation aborted at t/lib/MyApp.pm line 3.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Looks like you failed 1 test of 1.
t/01-use.t .....
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
# Failed test 'use MyApp;'
# at t/02-map.t line 7.
# Tried to use 'MyApp'.
# Error: Base class package "Class::Data::Inheritable" is empty.
# (Perhaps you need to 'use' the module which defines that package first,
# or make that module available in @INC (@INC contains: ./t/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/arch /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0 /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0 .).
# at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4
# BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4.
# Compilation failed in require at t/lib/MyApp.pm line 3.
# BEGIN failed--compilation aborted at t/lib/MyApp.pm line 3.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Can't locate object method "components" via package "MyApp" at t/02-map.t line 9.
# Looks like you planned 3 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/02-map.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
Base class package "Class::Data::Inheritable" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: ./t/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/arch /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0 /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0 .).
at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4.
Compilation failed in require at t/lib/MyApp.pm line 3.
BEGIN failed--compilation aborted at t/lib/MyApp.pm line 3.
Compilation failed in require at t/03-run.t line 8.
BEGIN failed--compilation aborted at t/03-run.t line 8.
# Looks like your test exited with 255 before it could output anything.
t/03-run.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
Base class package "Class::Data::Inheritable" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: ./t/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/arch /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/lib /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/arch /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0 /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0/x86_64-linux /home/cpan/pit/bare/perl-5.15.0/lib/5.15.0 .).
at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib/Sledge/Engine.pm line 4.
Compilation failed in require at t/lib/MyApp.pm line 3.
BEGIN failed--compilation aborted at t/lib/MyApp.pm line 3.
Compilation failed in require at t/04-static.t line 8.
BEGIN failed--compilation aborted at t/04-static.t line 8.
# Looks like your test exited with 255 before it could output anything.
t/04-static.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/5 subtests
Test Summary Report
-------------------
t/00-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/01-use.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/02-map.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
t/03-run.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/04-static.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 5 tests but ran 0.
Files=5, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.09 cusr 0.03 csys = 0.14 CPU)
Result: FAIL
Failed 5/5 test programs. 3/3 subtests failed.
BEGIN failed--compilation aborted at /home/cpan/pit/bare/perl-5.15.0/bin/cpanp-run-perl5.15.0 line 8.
[MSG] [Mon Aug 8 17:25:45 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.64.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/qt/bin:/usr/share/texmf/bin:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 15284
PERL5_CPANPLUS_IS_VERSION = 0.9109
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.15.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.15.0/bin/perl5.15.0
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 15 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.33.4, archname=x86_64-linux
uname='linux slack64 2.6.33.4 #3 smp wed may 12 23:13:09 cdt 2010 x86_64 intel(r) xeon(r) cpu e5520 @ 2.27ghz genuineintel gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.15.0 -Dusedevel'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.4', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib64 /usr/lib/../lib64 /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_USE_DEVEL USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Jun 21 2011 13:17:57
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/arch:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib:/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="15284"
PERL5_CPANPLUS_IS_VERSION="0.9109"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.15.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/lib
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Class-Inspector-1.25/blib/arch
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/lib
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/String-CamelCase-0.02/blib/arch
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/lib
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Spiffy-0.30/blib/arch
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/lib
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Test-Base-0.60/blib/arch
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/lib
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Utils-0.04/blib/arch
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/lib
/home/cpan/pit/bare/conf/perl-5.15.0/.cpanplus/5.15.0/build/Sledge-Engine-0.03/blib/arch
/home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0/x86_64-linux
/home/cpan/pit/bare/perl-5.15.0/lib/site_perl/5.15.0
/home/cpan/pit/bare/perl-5.15.0/lib/5.15.0/x86_64-linux
/home/cpan/pit/bare/perl-5.15.0/lib/5.15.0
.