App-Cme v1.035 Perl 5 v5.24.1 i686-linux-thread-multi-ld
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
App-Cme v1.035
- Platform
- Perl 5 v5.24.1 i686-linux-thread-multi-ld
- Date
- 2022-01-14 23:33:02
- ID
- 5112ae20-7592-11ec-bc66-57723b537541
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear DDUMONT,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
# Failed test 'run "180: modification with a script and args" stderr content'
# at t/cme-command.t line 292.
# got: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar'
# '
# expected: ''
# Failed test 'run "180: modification with a script and args": stdout content'
# at t/cme-command.t line 293.
# got: ''
# expected: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar'
#
# '
# Looks like you failed 2 tests of 5.
# Failed test '180: modification with a script and args'
# at t/cme-command.t line 294.
# Failed test 'run "line 187: modification with a script and a default value" stderr content'
# at t/cme-command.t line 292.
# got: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar'
# '
# expected: ''
# Failed test 'run "line 187: modification with a script and a default value": stdout content'
# at t/cme-command.t line 293.
# got: ''
# expected: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar'
#
# '
# Looks like you failed 2 tests of 5.
# Failed test 'line 187: modification with a script and a default value'
# at t/cme-command.t line 294.
# Failed test 'run "line 193: modification with a script and a var that uses a default value" stderr content'
# at t/cme-command.t line 292.
# got: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar'
# '
# expected: ''
# Failed test 'run "line 193: modification with a script and a var that uses a default value": stdout content'
# at t/cme-command.t line 293.
# got: ''
# expected: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar'
#
# '
# Looks like you failed 2 tests of 5.
# Failed test 'line 193: modification with a script and a var that uses a default value'
# at t/cme-command.t line 294.
# Failed test 'run "line 210: modification with a script and var section which uses args" stderr content'
# at t/cme-command.t line 292.
# got: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar2'
# '
# expected: ''
# Failed test 'run "line 210: modification with a script and var section which uses args": stdout content'
# at t/cme-command.t line 293.
# got: ''
# expected: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar2'
#
# '
# Looks like you failed 2 tests of 5.
# Failed test 'line 210: modification with a script and var section which uses args'
# at t/cme-command.t line 294.
# Failed test 'run "line 221: modification with a script with load =~ regex and quotes and \s" stderr content'
# at t/cme-command.t line 292.
# got: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> 'afoofoo'
# '
# expected: ''
# Failed test 'run "line 221: modification with a script with load =~ regex and quotes and \s": stdout content'
# at t/cme-command.t line 293.
# got: ''
# expected: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> 'afoofoo'
#
# '
# Looks like you failed 2 tests of 5.
# Failed test 'line 221: modification with a script with load =~ regex and quotes and \s'
# at t/cme-command.t line 294.
# Failed test 'run "line 241: modification with a Perl script run by cme run with args" stderr content'
# at t/cme-command.t line 292.
# got: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> '$namefoobar3'
# '
# expected: ''
# Looks like you failed 1 test of 5.
# Failed test 'line 241: modification with a Perl script run by cme run with args'
# at t/cme-command.t line 294.
# Failed test 'run "line 251: modification with a script and var section which uses regexp and capture" stderr content'
# at t/cme-command.t line 292.
# got: 'command '!': Going from root node to root node
# command 'MY_HOSTID=aaaaab': Setting leaf 'MY_HOSTID' uniline to 'aaaaab'.
# command 'MY_HOSTID=~s/(a{4})/$1x4/': Applying regexp 's/(a{4})/$1x4/' to leaf 'MY_HOSTID' uniline. Result is 'aaaax4ab'.
#
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> 'aaaaab'
# - MY_HOSTID: 'aaaaab' -> 'aaaax4ab'
# '
# expected: 'command '!': Going from root node to root node
# command 'MY_HOSTID=aaaaab': Setting leaf 'MY_HOSTID' uniline to 'aaaaab'.
# command 'MY_HOSTID=~s/(a{4})/$1x4/': Applying regexp 's/(a{4})/$1x4/' to leaf 'MY_HOSTID' uniline. Result is 'aaaax4ab'.
# '
# Failed test 'run "line 251: modification with a script and var section which uses regexp and capture": stdout content'
# at t/cme-command.t line 293.
# got: ''
# expected: '
# Changes applied to popcon configuration:
# - MY_HOSTID: 'aaaaaaaaaaaaaaaaaaaa' -> 'aaaaab'
# - MY_HOSTID: 'aaaaab' -> 'aaaax4ab'
#
# '
# Looks like you failed 2 tests of 5.
# Failed test 'line 251: modification with a script and var section which uses regexp and capture'
# at t/cme-command.t line 294.
# Looks like you failed 7 tests of 21.
t/cme-command.t ...
Dubious, test returned 7 (wstat 1792, 0x700)
Failed 7/21 subtests
t/parse_script.t .. ok
t/perl-critic.t ... skipped: Author test. Set $ENV{TEST_AUTHOR} to a true value to run.
t/pod.t ........... skipped: these tests are for testing by the author
Test Summary Report
-------------------
t/cme-command.t (Wstat: 1792 Tests: 21 Failed: 7)
Failed tests: 11-13, 15-18
Non-zero exit status: 7
Files=4, Tests=22, 1 wallclock secs ( 0.03 usr 0.00 sys + 0.86 cusr 0.07 csys = 0.96 CPU)
Result: FAIL
Failed 1/4 test programs. 7/22 subtests failed.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
App::Cmd::Setup 0.334 0
App::Cmd::Tester 0.334 0
Config::Model 2.149 2.124
Config::Model::FuseUI 2.149 0
Config::Model::Lister 2.149 0
Config::Model::ObjTreeScanner 2.149 0
Config::Model::SimpleUI 2.149 0
Config::Model::TermUI 2.149 0
Config::Model::Utils::GenClassPod 2.149 0
Data::Dumper 2.160 0
Encode 2.80_01 0
English 1.10 0
File::HomeDir 1.006 0
File::Spec 3.75 0
JSON 4.05 0
Log::Log4perl 1.54 0
Module::Build 0.4231 0.34
Path::Tiny 0.120 0
Pod::POM 2.01 0
Pod::POM::View::Text 2.01 0
Scalar::Util 1.42_02 0
Term::ANSIColor 4.04 2.01
Test::File::Contents 0.23 0
Test::More 1.302188 0
Test::Perl::Critic 1.04 0
Test::Pod 1.52 1.00
Tie::Hash 1.05 0
XXX 0.38 0
YAML 1.30 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.62
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.62
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.63
Pod::Simple 3.32
Test2 1.302188
Test::Harness 3.42
Test::More 1.302188
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/thr-ld/conf/perl-5.24.1/.cpanplus/5.24.1/build/tGFuxOqqEI/App-Cme-1.035/blib/script:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/qEScxdYzNp/lib/perl5:/home/cpan/pit/thr-ld/conf/perl-5.24.1/.cpanplus/5.24.1/build/tGFuxOqqEI/App-Cme-1.035/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.24.1/.cpanplus/5.24.1/build/tGFuxOqqEI/App-Cme-1.035/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 5068
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr-ld/conf/perl-5.24.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/qEScxdYzNp
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/qEScxdYzNp"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/qEScxdYzNp
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr-ld/perl-5.24.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 24 subversion 1) configuration:
Platform:
osname=linux, osvers=4.19.0-16-686, archname=i686-linux-thread-multi-ld
uname='linux dagobah 4.19.0-16-686 #1 smp debian 4.19.181-1 (2021-03-19) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr-ld/perl-5.24.1 -Dusethreads -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=undef, use64bitall=undef, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='8.3.0', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12, longdblkind=3
ivtype='long', ivsize=4, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/i686-linux-gnu/8/include-fixed /usr/include/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.28.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.28'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_COPY_ON_WRITE PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_LONG_DOUBLE
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Jun 12 2021 22:46:02
%ENV:
PERL5LIB="/home/cpan/pit/jail/qEScxdYzNp/lib/perl5:/home/cpan/pit/thr-ld/conf/perl-5.24.1/.cpanplus/5.24.1/build/tGFuxOqqEI/App-Cme-1.035/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.24.1/.cpanplus/5.24.1/build/tGFuxOqqEI/App-Cme-1.035/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="5068"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr-ld/conf/perl-5.24.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/qEScxdYzNp"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/qEScxdYzNp""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/qEScxdYzNp"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/qEScxdYzNp/lib/perl5/5.24.1/i686-linux-thread-multi-ld
/home/cpan/pit/jail/qEScxdYzNp/lib/perl5/5.24.1
/home/cpan/pit/jail/qEScxdYzNp/lib/perl5/i686-linux-thread-multi-ld
/home/cpan/pit/jail/qEScxdYzNp/lib/perl5
/home/cpan/pit/thr-ld/conf/perl-5.24.1/.cpanplus/5.24.1/build/tGFuxOqqEI/App-Cme-1.035/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.24.1/.cpanplus/5.24.1/build/tGFuxOqqEI/App-Cme-1.035/blib/arch
/home/cpan/pit/thr-ld/perl-5.24.1/lib/site_perl/5.24.1/i686-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.24.1/lib/site_perl/5.24.1
/home/cpan/pit/thr-ld/perl-5.24.1/lib/5.24.1/i686-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.24.1/lib/5.24.1
.