Image-Synchronize v2.002 Perl 5 v5.30.1 x86_64-linux-thread-multi-ld
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Image-Synchronize v2.002
- Platform
- Perl 5 v5.30.1 x86_64-linux-thread-multi-ld
- Date
- 2020-11-19 08:29:20
- ID
- 520370dc-2a41-11eb-84bc-edd243e66a77
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear LSTROUS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9908. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr-ld/perl-5.30.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Can't locate Clone.pm in @INC (you may need to install the Clone module) (@INC contains: /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1 /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1 .) at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/CameraOffsets.pm line 17.
BEGIN failed--compilation aborted at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/CameraOffsets.pm line 17.
Compilation failed in require at t/Image-Synchronize-CameraOffsets.t line 4.
BEGIN failed--compilation aborted at t/Image-Synchronize-CameraOffsets.t line 4.
t/Image-Synchronize-CameraOffsets.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Clone.pm in @INC (you may need to install the Clone module) (@INC contains: /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1 /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1 .) at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/Timerange.pm line 116.
BEGIN failed--compilation aborted at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/Timerange.pm line 116.
Compilation failed in require at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/GpsPositionCollection.pm line 8.
BEGIN failed--compilation aborted at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/GpsPositionCollection.pm line 8.
Compilation failed in require at t/Image-Synchronize-GpsPositionCollection.t line 3.
BEGIN failed--compilation aborted at t/Image-Synchronize-GpsPositionCollection.t line 3.
t/Image-Synchronize-GpsPositionCollection.t ..
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/Image-Synchronize-Logger.t ................. ok
Can't locate Clone.pm in @INC (you may need to install the Clone module) (@INC contains: /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1 /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1 .) at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/Timerange.pm line 116.
BEGIN failed--compilation aborted at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/Timerange.pm line 116.
Compilation failed in require at t/Image-Synchronize-Timerange.t line 3.
BEGIN failed--compilation aborted at t/Image-Synchronize-Timerange.t line 3.
t/Image-Synchronize-Timerange.t ..............
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Clone.pm in @INC (you may need to install the Clone module) (@INC contains: /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1 /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1 .) at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/Timestamp.pm line 131.
BEGIN failed--compilation aborted at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize/Timestamp.pm line 131.
Compilation failed in require at t/Image-Synchronize-Timestamp.t line 7.
BEGIN failed--compilation aborted at t/Image-Synchronize-Timestamp.t line 7.
t/Image-Synchronize-Timestamp.t ..............
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Clone.pm in @INC (you may need to install the Clone module) (@INC contains: /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1 /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5 /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1 /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1/x86_64-linux-thread-multi-ld /home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1 .) at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize.pm line 45.
BEGIN failed--compilation aborted at /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib/Image/Synchronize.pm line 45.
Compilation failed in require at t/Image-Synchronize.t line 3.
BEGIN failed--compilation aborted at t/Image-Synchronize.t line 3.
t/Image-Synchronize.t ........................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Test Summary Report
-------------------
t/Image-Synchronize-CameraOffsets.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Image-Synchronize-GpsPositionCollection.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Image-Synchronize-Timerange.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Image-Synchronize-Timestamp.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Image-Synchronize.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=6, Tests=10, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.13 cusr 0.03 csys = 0.19 CPU)
Result: FAIL
Failed 5/6 test programs. 0/10 subtests failed.
make: *** [Makefile:916: test_dynamic] Error 2
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Clone
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'LSTROUS (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Clone' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.48 0
IO::Interactive 1.022 0
Image::ExifTool 12.00 10.14
Modern::Perl 1.20200211 0
Path::Class 0.37 0
Path::Iterator::Rule 1.014 0
Term::ProgressBar 2.22 0
XML::Twig 3.52 0
YAML::Any 1.30 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9908
CPANPLUS::Dist::Build 0.90
Cwd 3.78
ExtUtils::CBuilder 0.280234
ExtUtils::Command 7.48
ExtUtils::Install 2.18
ExtUtils::MakeMaker 7.48
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.40
File::Spec 3.78
Module::Build 0.4231
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302181
Test::Harness 3.42
Test::More 1.302181
version 0.9928
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/script:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/snap/bin:/var/lib/snapd/snap/bin:/snap/bin:/var/lib/snapd/snap/bin:/snap/bin:/var/lib/snapd/snap/bin
PERL5LIB = /home/cpan/pit/jail/bzVyoy3S7q/lib/perl5:/home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 1511828
PERL5_CPANPLUS_IS_VERSION = 0.9908
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr-ld/conf/perl-5.30.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/bzVyoy3S7q
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/bzVyoy3S7q"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/bzVyoy3S7q
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr-ld/perl-5.30.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 30 subversion 1) configuration:
Platform:
osname=linux
osvers=5.4.0-26-generic
archname=x86_64-linux-thread-multi-ld
uname='linux uchder 5.4.0-26-generic #30-ubuntu smp mon apr 20 16:58:30 utc 2020 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr-ld/perl-5.30.1 -Dusethreads -Duselongdouble'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='9.3.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Locally applied patches:
Devel::PatchPerl 1.90
Built under linux
Compiled at Apr 26 2020 23:45:06
%ENV:
PERL5LIB="/home/cpan/pit/jail/bzVyoy3S7q/lib/perl5:/home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib:/home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="1511828"
PERL5_CPANPLUS_IS_VERSION="0.9908"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr-ld/conf/perl-5.30.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/bzVyoy3S7q"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/bzVyoy3S7q""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/bzVyoy3S7q"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1/x86_64-linux-thread-multi-ld
/home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/5.30.1
/home/cpan/pit/jail/bzVyoy3S7q/lib/perl5/x86_64-linux-thread-multi-ld
/home/cpan/pit/jail/bzVyoy3S7q/lib/perl5
/home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/lib
/home/cpan/pit/thr-ld/conf/perl-5.30.1/.cpanplus/5.30.1/build/ZTdrfxMdKY/Image-Synchronize-2.002/blib/arch
/home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.30.1/lib/site_perl/5.30.1
/home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1/x86_64-linux-thread-multi-ld
/home/cpan/pit/thr-ld/perl-5.30.1/lib/5.30.1