Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: NA Device-WebIO-0.008 v5.10.0 GNU/Linux
Date: 2014-11-30T15:34:11Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Timm Murray,
This is a computer-generated report for Device-WebIO-0.008
on perl 5.10.0, created by CPAN-Reporter-1.2011.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.10.0/5da8/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Perl v5.12.0 required--this is only v5.10.0, stopped at t/001_load.t line 25.
BEGIN failed--compilation aborted at t/001_load.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/001_load.t ....................
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 14/14 subtests
t/002_pod.t ..................... ok
Perl v5.12.0 required--this is only v5.10.0, stopped at t/010_digital_input.t line 25.
BEGIN failed--compilation aborted at t/010_digital_input.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/010_digital_input.t ...........
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 12/12 subtests
Perl v5.12.0 required--this is only v5.10.0, stopped at t/020_digital_output.t line 25.
BEGIN failed--compilation aborted at t/020_digital_output.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/020_digital_output.t ..........
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 13/13 subtests
Perl v5.12.0 required--this is only v5.10.0, stopped at t/030_adc_input.t line 25.
BEGIN failed--compilation aborted at t/030_adc_input.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/030_adc_input.t ...............
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 20/20 subtests
Perl v5.12.0 required--this is only v5.10.0, stopped at t/040_pwm_output.t line 25.
BEGIN failed--compilation aborted at t/040_pwm_output.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/040_pwm_output.t ..............
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 13/13 subtests
Perl v5.12.0 required--this is only v5.10.0, stopped at t/060_video_output.t line 25.
BEGIN failed--compilation aborted at t/060_video_output.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/060_video_output.t ............
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 13/13 subtests
Perl v5.14.0 required--this is only v5.10.0, stopped at t/070_description.t line 25.
BEGIN failed--compilation aborted at t/070_description.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/070_description.t .............
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 3/3 subtests
Perl v5.12.0 required--this is only v5.10.0, stopped at t/080_still_image_output.t line 25.
BEGIN failed--compilation aborted at t/080_still_image_output.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/080_still_image_output.t ......
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 9/9 subtests
Perl v5.14.0 required--this is only v5.10.0, stopped at t/090_i2c.t line 25.
BEGIN failed--compilation aborted at t/090_i2c.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/090_i2c.t .....................
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 2/2 subtests
Perl v5.14.0 required--this is only v5.10.0, stopped at t/100_temp_sensors.t line 25.
BEGIN failed--compilation aborted at t/100_temp_sensors.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/100_temp_sensors.t ............
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 6/6 subtests
Perl v5.12.0 required--this is only v5.10.0, stopped at t/110_digital_input_callback.t line 25.
BEGIN failed--compilation aborted at t/110_digital_input_callback.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/110_digital_input_callback.t ..
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 16/16 subtests
Perl v5.12.0 required--this is only v5.10.0, stopped at t/120_video_output_callback.t line 25.
BEGIN failed--compilation aborted at t/120_video_output_callback.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/120_video_output_callback.t ...
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 5/5 subtests
Perl v5.12.0 required--this is only v5.10.0, stopped at t/200_two_types_one_obj.t line 25.
BEGIN failed--compilation aborted at t/200_two_types_one_obj.t line 25.
# Looks like your test exited with 9 before it could output anything.
t/200_two_types_one_obj.t .......
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 12/12 subtests
Test Summary Report
-------------------
t/001_load.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 14 tests but ran 0.
t/010_digital_input.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 12 tests but ran 0.
t/020_digital_output.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/030_adc_input.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 20 tests but ran 0.
t/040_pwm_output.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/060_video_output.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/070_description.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 3 tests but ran 0.
t/080_still_image_output.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/090_i2c.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/100_temp_sensors.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 6 tests but ran 0.
t/110_digital_input_callback.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 16 tests but ran 0.
t/120_video_output_callback.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 5 tests but ran 0.
t/200_two_types_one_obj.t (Wstat: 2304 Tests: 0 Failed: 0)
Non-zero exit status: 9
Parse errors: Bad plan. You planned 12 tests but ran 0.
Files=14, Tests=17, 2 wallclock secs ( 0.03 usr 0.02 sys + 0.48 cusr 0.05 csys = 0.58 CPU)
Result: FAIL
Failed 13/14 test programs. 0/17 subtests failed.
Makefile:924: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 9
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Exception::Tiny 0 0.2.1
Moo 0 1.006001
namespace::clean 0 0.25
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.03_05
Test::Pod 0 1.48
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 20068
PERL5_CPAN_IS_RUNNING = 20068
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/perl-5.10.0/5da8/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ------------
CPAN 2.05
CPAN::Meta 2.143240
Cwd 3.47
ExtUtils::CBuilder 0.280220
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 7.03_05
ExtUtils::Manifest 1.69
ExtUtils::ParseXS 3.24
File::Spec 3.47
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4210
Module::Signature 0.73
Parse::CPAN::Meta 1.4414
Test::Harness 3.34
Test::More 1.301001_079
YAML 1.13
YAML::Syck 1.27
version 0.9909
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=3.16-2-amd64, archname=x86_64-linux
uname='linux k83 3.16-2-amd64 #1 smp debian 3.16.3-2 (2014-09-20) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.10.0/5da8 -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Uuselongdouble -DDEBUGGING=-g -Dusedl -Ddlsrc=dl_dlopen.xs -Dlibs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc -Dlibpth=/usr/lib/x86_64-linux-gnu /usr/local/lib /lib /usr/lib'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.9.1', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/lib/x86_64-linux-gnu /usr/local/lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at Oct 17 2014 13:25:33
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="20068"
PERL5_CPAN_IS_RUNNING="20068"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.10.0/5da8/lib/5.10.0/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.10.0/5da8/lib/5.10.0
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.10.0/5da8/lib/site_perl/5.10.0/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/perl/perl-5.10.0/5da8/lib/site_perl/5.10.0
.