Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Test-MonitorSites-0.15 v5.22.2 GNU/Linux
Date: 2017-06-08T19:26:16Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Hugh Esco,
This is a computer-generated report for Test-MonitorSites-0.15
on perl 5.22.2, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.22.2/2d7c/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing Test::MonitorSites 0.15
t/00.load.t ........................ ok
Error GETing http://not.example.com: Can't connect to not.example.com:80 at t/10_exercise_constructor.t line 52.
# Looks like your test exited with 22 just after 19.
t/10_exercise_constructor.t ........
Dubious, test returned 22 (wstat 5632, 0x1600)
Failed 30/49 subtests
Error GETing http://not.example.com: Can't connect to not.example.com:80 at lib/Test/MonitorSites.pm line 481.
t/12_exercise_test_sites_method.t ..
Dubious, test returned 22 (wstat 5632, 0x1600)
Failed 16/33 subtests
Error GETing http://www.campaignfoundations.com: Can't connect to www.campaignfoundations.com:80 at lib/Test/MonitorSites.pm line 481.
t/14_cover_conditions.t ............
Dubious, test returned 113 (wstat 28928, 0x7100)
Failed 17/17 subtests
Error GETing http://www.campaignfoundations.com: Can't connect to www.campaignfoundations.com:80 at lib/Test/MonitorSites.pm line 481.
t/15_report_by_ip.t ................
Dubious, test returned 113 (wstat 28928, 0x7100)
Failed 4/4 subtests
No mailer type specified (and no default available), thus can not find executable program. at lib/Test/MonitorSites.pm line 355.
t/16_monitor_quietly.t .............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 12/18 subtests
# Failed test 'Test::Perl::Critic for "blib/lib/Test/MonitorSites.pm"'
# at /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.22.2/2d7c/lib/site_perl/5.22.2/Test/Perl/Critic.pm line 104.
#
# Private Member Data shouldn't be accessed directly at line 29, column 15. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 30, column 23. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 33, column 19. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 37, column 33. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 48, column 23. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 49, column 13. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 195, column 6. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 222, column 25. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Three-argument form of open used at line 242, column 3. Three-argument open is not available until perl 5.6. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 316, column 26. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
# Three-argument form of open used at line 325, column 5. Three-argument open is not available until perl 5.6. (Severity: 5)
# Three-argument form of open used at line 344, column 5. Three-argument open is not available until perl 5.6. (Severity: 5)
# Private Member Data shouldn't be accessed directly at line 375, column 6. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5)
t/perlcritic.t .....................
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/pod-coverage.t ................... ok
t/pod.t ............................ ok
Test Summary Report
-------------------
t/00.load.t (Wstat: 0 Tests: 5 Failed: 0)
TODO passed: 2-5
t/10_exercise_constructor.t (Wstat: 5632 Tests: 19 Failed: 0)
Non-zero exit status: 22
Parse errors: Bad plan. You planned 49 tests but ran 19.
t/12_exercise_test_sites_method.t (Wstat: 5632 Tests: 17 Failed: 0)
Non-zero exit status: 22
Parse errors: Bad plan. You planned 33 tests but ran 17.
t/14_cover_conditions.t (Wstat: 28928 Tests: 0 Failed: 0)
Non-zero exit status: 113
Parse errors: Bad plan. You planned 17 tests but ran 0.
t/15_report_by_ip.t (Wstat: 28928 Tests: 0 Failed: 0)
Non-zero exit status: 113
Parse errors: Bad plan. You planned 4 tests but ran 0.
t/16_monitor_quietly.t (Wstat: 512 Tests: 6 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 18 tests but ran 6.
t/perlcritic.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=9, Tests=50, 16 wallclock secs ( 0.02 usr 0.05 sys + 2.07 cusr 0.56 csys = 2.70 CPU)
Result: FAIL
Failed 6/9 test programs. 1/50 subtests failed.
Makefile:874: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------------- ---- --------
Carp 0 1.38
Config::Simple 0 4.58
Cwd 0 3.62
Data::Dumper 0 2.161
HTML::Tidy 0 1.56
HTTP::Request::Common 0 6.11
Mail::Mailer 0 2.18
Test::Builder 0 1.302085
Test::Builder::Tester 0 1.302085
Test::HTML::Tidy 0 1.00
Test::More 0 1.302085
Test::Perl::Critic 0 1.03
Test::Pod 1.14 1.51
Test::Pod::Coverage 1.04 1.10
Test::WWW::Mechanize 0 1.48
WWW::Mechanize 0 1.84
build_requires:
Module Need Have
--------------------- ---- --------
ExtUtils::MakeMaker 0 7.27_02
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 24055
PERL5_CPAN_IS_RUNNING = 24055
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.22.2/2d7c/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.18
CPAN::Meta 2.150010
Cwd 3.62
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.27_02
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.27_02
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.62
JSON 2.94
JSON::PP 2.94
Module::Build 0.42_23
Module::Signature 0.81
Parse::CPAN::Meta 1.4422
Test::Harness 3.39
Test::More 1.302085
YAML 1.23_001
YAML::Syck 1.30
version 0.9918
--
Summary of my perl5 (revision 5 version 22 subversion 2) configuration:
Derived from: 9cbffb38735712e3a34e6f537892b6ef06fb815f
Platform:
osname=linux, osvers=4.9.0-2-amd64, archname=x86_64-linux-ld
uname='linux k93msid 4.9.0-2-amd64 #1 smp debian 4.9.18-1 (2017-03-30) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.22.2/2d7c -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='6.3.0 20170406', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/6/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.24'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
PERL_USE_DEVEL USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LOCALE_TIME
USE_LONG_DOUBLE USE_PERLIO USE_PERL_ATOF
Locally applied patches:
uncommitted-changes
Built under linux
Compiled at Apr 17 2017 02:15:45
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="24055"
PERL5_CPAN_IS_RUNNING="24055"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.22.2/2d7c/lib/site_perl/5.22.2/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.22.2/2d7c/lib/site_perl/5.22.2
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.22.2/2d7c/lib/5.22.2/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.22.2/2d7c/lib/5.22.2
.