Starman v0.4017 Perl 5 v5.20.2 x86_64-linux-ld
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Starman v0.4017
- Platform
- Perl 5 v5.20.2 x86_64-linux-ld
- Date
- 2024-03-30 13:13:55
- ID
- 5cb23702-ee97-11ee-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Tatsuhiko Miyagawa,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00_compile.t ........... ok
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
2024/03/30-13:13:21 Starman::Server (type Net::Server::PreFork) starting! pid(2166563)
Binding to TCP port 39285 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:21 Server closing!
t/chunked_req.t .......... ok
t/chunked_termination.t .. ok
2024/03/30-13:13:21 Starman::Server (type Net::Server::PreFork) starting! pid(2166571)
Binding to TCP port 45433 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:22 Server closing!
t/chunked_zero_length.t .. ok
2024/03/30-13:13:22 Starman::Server (type Net::Server::PreFork) starting! pid(2166578)
Binding to TCP port 43791 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:22 Server closing!
t/early-hints.t .......... ok
2024/03/30-13:13:22 Starman::Server (type Net::Server::PreFork) starting! pid(2166585)
Binding to TCP port 36471 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:23 Server closing!
Accept failed with 29 tries left: Invalid argument
Accept failed with 28 tries left: Invalid argument
Accept failed with 27 tries left: Invalid argument
Accept failed with 26 tries left: Invalid argument
Accept failed with 25 tries left: Invalid argument
Accept failed with 24 tries left: Invalid argument
Accept failed with 23 tries left: Invalid argument
Accept failed with 22 tries left: Invalid argument
Accept failed with 21 tries left: Invalid argument
Accept failed with 20 tries left: Invalid argument
Accept failed with 19 tries left: Invalid argument
Accept failed with 18 tries left: Invalid argument
Accept failed with 17 tries left: Invalid argument
Accept failed with 16 tries left: Invalid argument
Accept failed with 15 tries left: Invalid argument
Accept failed with 14 tries left: Invalid argument
Accept failed with 13 tries left: Invalid argument
Accept failed with 12 tries left: Invalid argument
Accept failed with 11 tries left: Invalid argument
Accept failed with 10 tries left: Invalid argument
Accept failed with 9 tries left: Invalid argument
Accept failed with 8 tries left: Invalid argument
Accept failed with 7 tries left: Invalid argument
Accept failed with 6 tries left: Invalid argument
Accept failed with 5 tries left: Invalid argument
Accept failed with 4 tries left: Invalid argument
Accept failed with 3 tries left: Invalid argument
Accept failed with 2 tries left: Invalid argument
Accept failed with 1 tries left: Invalid argument
Accept failed with 0 tries left: Invalid argument
Ran out of accept retries!
t/eintr.t ................ ok
2024/03/30-13:13:53 Starman::Server (type Net::Server::PreFork) starting! pid(2166593)
Binding to TCP port 36719 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:53 Server closing!
t/expect.t ............... ok
2024/03/30-13:13:53 Starman::Server (type Net::Server::PreFork) starting! pid(2166600)
Binding to TCP port 36499 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:53 Server closing!
2024/03/30-13:13:53 Starman::Server (type Net::Server::PreFork) starting! pid(2166606)
Binding to TCP port 36921 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:54 Server closing!
t/harakiri.t ............. ok
2024/03/30-13:13:54 Starman::Server (type Net::Server::PreFork) starting! pid(2166633)
Binding to TCP port 45625 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:54 Server closing!
t/lf_only_request.t ...... ok
2024/03/30-13:13:54 Starman::Server (type Net::Server::PreFork) starting! pid(2166640)
Binding to TCP port 42625 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:54 Server closing!
t/no_chunked_head.t ...... ok
t/release-findbin.t ...... skipped: these tests are for release candidate testing
t/release-rand.t ......... skipped: these tests are for release candidate testing
2024/03/30-13:13:54 Starman::Server (type Net::Server::PreFork) starting! pid(2166649)
Binding to TCP port 42405 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:54 Server closing!
t/single_zero.t .......... ok
t/ssl.t .................. skipped: Test requires module 'LWP::Protocol::https' but it's not found
t/ssl_largebody.t ........ skipped: Test requires module 'LWP::Protocol::https' but it's not found
2024/03/30-13:13:54 Starman::Server (type Net::Server::PreFork) starting! pid(2166658)
Binding to TCP port 40027 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2024/03/30-13:13:55 Server closing!
t/suite.t ................ ok
All tests successful.
Files=17, Tests=121, 34 wallclock secs ( 0.06 usr 0.02 sys + 1.49 cusr 0.49 csys = 2.06 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Data::Dump 1.25 0
HTTP::Date 6.06 0
HTTP::Parser::XS 0.17 0
HTTP::Status 6.45 0
LWP::UserAgent 6.77 0
Net::Server 2.014 2.007
Plack 1.0051 0.9971
Test::More 1.302198 0
Test::Requires 0.11 0
Test::TCP 2.22 2.00
parent 0.228 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.75
Module::Build 0.4234
Pod::Parser 1.62
Pod::Simple 3.28
Test2 1.302198
Test::Harness 3.48
Test::More 1.302198
version 0.9930
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/bare-ld/conf/perl-5.20.2/.cpanplus/5.20.2/build/MYeEJWJzzc/Starman-0.4017/blib/script:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/n65EtPShMf/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.20.2/.cpanplus/5.20.2/build/MYeEJWJzzc/Starman-0.4017/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.20.2/.cpanplus/5.20.2/build/MYeEJWJzzc/Starman-0.4017/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 2153500
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-ld/conf/perl-5.20.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/n65EtPShMf
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/n65EtPShMf"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/n65EtPShMf
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-ld/perl-5.20.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 20 subversion 2) configuration:
Platform:
osname=linux, osvers=5.4.0-26-generic, archname=x86_64-linux-ld
uname='linux uchder 5.4.0-26-generic #30-ubuntu smp mon apr 20 16:58:30 utc 2020 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-ld/perl-5.20.2 -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='9.3.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.90
Built under linux
Compiled at Apr 27 2020 14:23:37
%ENV:
PERL5LIB="/home/cpan/pit/jail/n65EtPShMf/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.20.2/.cpanplus/5.20.2/build/MYeEJWJzzc/Starman-0.4017/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.20.2/.cpanplus/5.20.2/build/MYeEJWJzzc/Starman-0.4017/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="2153500"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-ld/conf/perl-5.20.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/n65EtPShMf"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/n65EtPShMf""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/n65EtPShMf"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpan/pit/jail/n65EtPShMf/lib/perl5/5.20.2/x86_64-linux-ld
/home/cpan/pit/jail/n65EtPShMf/lib/perl5/5.20.2
/home/cpan/pit/jail/n65EtPShMf/lib/perl5/x86_64-linux-ld
/home/cpan/pit/jail/n65EtPShMf/lib/perl5
/home/cpan/pit/bare-ld/conf/perl-5.20.2/.cpanplus/5.20.2/build/MYeEJWJzzc/Starman-0.4017/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.20.2/.cpanplus/5.20.2/build/MYeEJWJzzc/Starman-0.4017/blib/arch
/home/cpan/pit/bare-ld/perl-5.20.2/lib/site_perl/5.20.2/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.20.2/lib/site_perl/5.20.2
/home/cpan/pit/bare-ld/perl-5.20.2/lib/5.20.2/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.20.2/lib/5.20.2
.