Sys-Mknod v0.02 Perl 5 v5.12.1 i386-freebsd-thread-multi-64int
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Sys-Mknod v0.02
- Platform
- Perl 5 v5.12.1 i386-freebsd-thread-multi-64int
- Date
- 2010-05-28 03:30:29
- ID
- 5d3cabac-6a09-11df-90a1-b2af90befd91
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SAMV,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9004. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri May 28 04:30:27 2010] Using cached file '/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/authors/id/S/SA/SAMV/CHECKSUMS' on disk; ttl (3600s) is not exceeded
[MSG] [Fri May 28 04:30:27 2010] Checksum matches for 'Sys-Mknod-0.02.tar.gz'
[MSG] [Fri May 28 04:30:27 2010] Extracted 'Sys::Mknod' to '/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02'
[MSG] [Fri May 28 04:30:27 2010] CPANPLUS is prefering Build.PL
[MSG] [Fri May 28 04:30:27 2010] Loading YACSmoke database "/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/cpansmoke.dat"
[MSG] [Fri May 28 04:30:28 2010] Checking if your kit is complete...
Looks good
Writing Makefile for Sys::Mknod
[MSG] [Fri May 28 04:30:28 2010] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri May 28 04:30:28 2010] Checking for previous PASS result for "Sys-Mknod-0.02"
[MSG] [Fri May 28 04:30:29 2010] cp Mknod.pm blib/lib/Sys/Mknod.pm
Manifying blib/man3/Sys::Mknod.3
[ERROR] [Fri May 28 04:30:29 2010] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/home/cpan/pit/rel/perl-5.12.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Sys::Mknod;'
# at t/01-mknod.t line 8.
# Tried to use 'Sys::Mknod'.
# Error: Can't locate sys/sysmacros.ph in @INC (@INC contains: /usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/lib /usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/arch /usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/lib /usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/arch /usr/home/cpan/pit/rel/perl-5.12.1/lib/site_perl/5.12.1/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/rel/perl-5.12.1/lib/site_perl/5.12.1 /usr/home/cpan/pit/rel/perl-5.12.1/lib/5.12.1/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/rel/perl-5.12.1/lib/5.12.1 .) at /usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/lib/Sys/Mknod.pm line 51.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Failed test 'make_dev(1,2)'
# at t/01-mknod.t line 13.
# got: 'Undefined subroutine &Sys::Mknod::makedev called at /usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/lib/Sys/Mknod.pm line 99.
# '
# expected: ''
Use of uninitialized value $val in concatenation (.) or string at t/01-mknod.t line 14.
# Failed test 'make_dev returns a value ()'
# at t/01-mknod.t line 14.
# Looks like you failed 3 tests of 11.
t/01-mknod.t ..
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/11 subtests
(less 8 skipped subtests: 0 okay)
Test Summary Report
-------------------
t/01-mknod.t (Wstat: 768 Tests: 11 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 3
Files=1, Tests=11, 0 wallclock secs ( 0.05 usr 0.02 sys + 0.02 cusr 0.04 csys = 0.14 CPU)
Result: FAIL
Failed 1/1 test programs. 3/11 subtests failed.
*** Error code 3
Stop in /usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02.
[MSG] [Fri May 28 04:30:29 2010] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
sys::sysmacros.ph
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'SAMV (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'sys::sysmacros.ph' => '0', # or a minimum working version
}
);
Thanks! :-)
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9004
CPANPLUS::Dist::Build 0.46
Cwd 3.31
ExtUtils::CBuilder 0.2703
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2205
File::Spec 3.31
Module::Build 0.3607
Test::Harness 3.21
Test::More 0.94
version 0.82
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.56.
Powered by minismokebox version 0.26
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/lib:/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 57587
PERL5_CPANPLUS_IS_VERSION = 0.9004
PERL5_MINISMOKEBOX = 0.26
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/rel/conf/perl-5.12.1/
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/rel/perl-5.12.1/bin/perl
UID: $< = 1003
EUID: $> = 1003
GID: $( = 1003 1003 1003
EGID: $) = 1003 1003 1003
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 1) configuration:
Platform:
osname=freebsd, osvers=7.2-release, archname=i386-freebsd-thread-multi-64int
uname='freebsd wintermute.staffordshire.gov.uk 7.2-release freebsd 7.2-release #0: fri may 1 08:49:13 utc 2009 root@walker.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/rel/perl-5.12.1 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt
perllibs=-lm -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under freebsd
Compiled at May 21 2010 12:29:02
%ENV:
PERL5LIB=":/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/lib:/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="57587"
PERL5_CPANPLUS_IS_VERSION="0.9004"
PERL5_MINISMOKEBOX="0.26"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/rel/conf/perl-5.12.1/"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/lib
/usr/home/cpan/pit/rel/conf/perl-5.12.1/.cpanplus/5.12.1/build/Sys-Mknod-0.02/blib/arch
/usr/home/cpan/pit/rel/perl-5.12.1/lib/site_perl/5.12.1/i386-freebsd-thread-multi-64int
/usr/home/cpan/pit/rel/perl-5.12.1/lib/site_perl/5.12.1
/usr/home/cpan/pit/rel/perl-5.12.1/lib/5.12.1/i386-freebsd-thread-multi-64int
/usr/home/cpan/pit/rel/perl-5.12.1/lib/5.12.1
.