Inline-C v0.79_001 Perl 5 v5.16.1 amd64-netbsd-thread-multi
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Inline-C v0.79_001
- Platform
- Perl 5 v5.16.1 amd64-netbsd-thread-multi
- Date
- 2019-01-26 12:03:25
- ID
- 62d034fc-2162-11e9-86e3-404589cf513b
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TINITA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9176. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.16.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t ................ ok
t/01syntax.t ........................... ok
t/02config.t ........................... ok
t/03typemap.t .......................... ok
t/04perlapi.t .......................... ok
t/05xsmode.t ........................... ok
t/06parseregexp.t ...................... ok
t/07typemap_multi.t .................... ok
t/08taint.t ............................ ok
This test could take a couple of minutes to run
t/09parser.t ........................... ok
t/10callback.t ......................... ok
t/11default_readonly.t ................. ok
t/14void_arg.t ......................... ok
t/14void_arg_PRD.t ..................... ok
t/15ccflags.t .......................... ok
t/16ccflagsex.t ........................ ok
t/17prehead.t .......................... ok
t/18quote_space.t ...................... ok
t/19INC.t .............................. ok
t/20eval.t ............................. ok
t/21read_DATA.t ........................ ok
t/22read_DATA_2.t ...................... ok
t/23validate.t ......................... ok
t/24prefix.t ........................... ok
t/25proto.t ............................ ok
t/26fork.t ............................. ok
t/27inline_maker.t ..................... ok
t/28autowrap.t ......................... ok
t/30cppflags.t ......................... ok
t/31include_dirs_angle_brackets.t ...... ok
Expected:
[[[ BEGIN EXPECTED ERRORS ]]]
PURPOSEFUL COMPILER ERROR!
A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
"make > out.make 2>&1" with error code 2
[[[ END EXPECTED ERRORS ]]]
Got:
[[[ BEGIN RECEIVED ERRORS ]]]
Running Mkbootstrap for eval_4_8023 ()
chmod 644 "eval_4_8023.bs"
"/home/cpan/pit/thr/perl-5.16.1/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- eval_4_8023.bs blib/arch/auto/eval_4_8023/eval_4_8023.bs 644
"/home/cpan/pit/thr/perl-5.16.1/bin/perl" "/home/cpan/pit/thr/perl-5.16.1/lib/site_perl/5.16.1/ExtUtils/xsubpp" -typemap "/home/cpan/pit/thr/perl-5.16.1/lib/5.16.1/ExtUtils/typemap" -typemap "/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/t/typemap" eval_4_8023.xs > eval_4_8023.xsc
mv eval_4_8023.xsc eval_4_8023.c
cc -c -iquote"/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/t" -fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include -O -DVERSION=\"0.00\" -DXS_VERSION=\"0.00\" -DPIC -fPIC "-I/home/cpan/pit/thr/perl-5.16.1/lib/5.16.1/amd64-netbsd-thread-multi/CORE" eval_4_8023.c
In file included from eval_4_8023.xs:5:0:
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/t/stdio.h:1:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'COMPILER'
*** Error code 1
Stop.
make: stopped in /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/_Inline_32include_dirs_double_quotes_bad.22071/build/eval_4_8023
A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
"make > out.make 2>&1" with error code 1
The build directory was:
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/_Inline_32include_dirs_double_quotes_bad.22071/build/eval_4_8023
To debug the problem, cd to the build directory, and inspect the output files.
Environment MAKEFLAGS = ''
Environment PATH = '/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin'
at (eval 4) line 10.
...propagated at /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/blib/lib/Inline/C.pm line 882.
BEGIN failed--compilation aborted at (eval 4) line 13.
[[[ END RECEIVED ERRORS ]]]
t/32include_dirs_double_quotes_bad.t ...
Failed 1/1 subtests
t/33include_dirs_double_quotes_good.t .. ok
t/author-pod-syntax.t .................. skipped: these tests are for testing by the author
t/parse-pegex.t ........................ ok
t/pegex-parser.t ....................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
Test Summary Report
-------------------
t/32include_dirs_double_quotes_bad.t (Wstat: 0 Tests: 1 Failed: 1)
Failed test: 1
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=35, Tests=157, 68 wallclock secs ( 0.10 usr 0.08 sys + 51.53 cusr 12.32 csys = 64.03 CPU)
Result: FAIL
Failed 1/35 test programs. 1/157 subtests failed.
*** Error code 255
Stop.
make: stopped in /home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.34 7.00
File::Copy::Recursive 0.38 0
File::Path 2.16 0
File::Spec 3.75 0.8
Inline 0.80 0.79
Parse::RecDescent 1.967015 1.967009
Pegex 0.70 0.58
Test::More 1.302141 0.88
Test::Warn 0.36 0.23
YAML::XS 0.76 0
autodie 2.10 0
version 0.9924 0.77
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9176
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.34
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.71
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4224
Pod::Parser 1.51
Pod::Simple 3.20
Test2 1.302141
Test::Harness 3.42
Test::More 1.302141
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.06.
Powered by minismokebox version 0.68
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = /home/cpan/pit/jail/08ODlUSLdf/lib/perl5:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 26771
PERL5_CPANPLUS_IS_VERSION = 0.9176
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.16.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/08ODlUSLdf
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/08ODlUSLdf"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/08ODlUSLdf
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.16.1/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 16 subversion 1) configuration:
Platform:
osname=netbsd, osvers=6.1.4, archname=amd64-netbsd-thread-multi
uname='netbsd naboo.bingosnet.co.uk 6.1.4 netbsd 6.1.4 (generic) amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.16.1 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include'
ccversion='', gccversion='4.5.3', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under netbsd
Compiled at May 9 2014 21:34:50
%ENV:
PERL5LIB="/home/cpan/pit/jail/08ODlUSLdf/lib/perl5:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/blib/lib:/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="26771"
PERL5_CPANPLUS_IS_VERSION="0.9176"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.16.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/08ODlUSLdf"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/08ODlUSLdf""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/08ODlUSLdf"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/08ODlUSLdf/lib/perl5/5.16.1/amd64-netbsd-thread-multi
/home/cpan/pit/jail/08ODlUSLdf/lib/perl5/5.16.1
/home/cpan/pit/jail/08ODlUSLdf/lib/perl5/amd64-netbsd-thread-multi
/home/cpan/pit/jail/08ODlUSLdf/lib/perl5
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/blib/lib
/home/cpan/pit/thr/conf/perl-5.16.1/.cpanplus/5.16.1/build/79KmBsI2r3/Inline-C-0.79_001/blib/arch
/home/cpan/pit/thr/perl-5.16.1/lib/site_perl/5.16.1/amd64-netbsd-thread-multi
/home/cpan/pit/thr/perl-5.16.1/lib/site_perl/5.16.1
/home/cpan/pit/thr/perl-5.16.1/lib/5.16.1/amd64-netbsd-thread-multi
/home/cpan/pit/thr/perl-5.16.1/lib/5.16.1
.