Device-Modem v1.53 Perl 5 v5.13.3 i686-linux
- Status
- Pass
- From
- Serguei Trouchelle (STRO)
- Dist
-
Device-Modem v1.53
- Platform
- Perl 5 v5.13.3 i686-linux
- Date
- 2010-07-23 17:04:48
- ID
- 666c6844-967c-11df-8f2e-c3d94a543d09
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Cosimo Streppone,
This is a computer-generated report for Device-Modem-1.53
on perl 5.13.3, created by CPAN-Reporter-1.1711.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/stro/perl/perl5133/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..15
ok 1
*** REMEMBER to run these tests as `root' where required!
No serial port set up, so *NO* tests will be executed...
To enable full testing, you can set these environment vars:
DEV_MODEM_PORT=[your serial port] (Ex.: 'COM1', '/dev/ttyS1', ...)
DEV_MODEM_BAUD=[serial link speed] (default is 19200)
On most unix environments, this can be done running:
DEV_MODEM_PORT=/dev/modem DEV_MODEM_BAUD=19200 make test
On Win32 systems, you can do:
set DEV_MODEM_PORT=COM1
set DEV_MODEM_BAUD=19200
nmake test (or make test)
skip 2
skip 3
skip 4
skip 5
skip 6
skip 7
skip 8
skip 9
skip 10
skip 11
skip 12
skip 13
skip 14
skip 15
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- ------
Device::SerialPort 0 1.04
configure_requires:
Module Need Have
------------------- ---- ------
ExtUtils::MakeMaker 0 6.5601
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 10655
PERL5_CPAN_IS_RUNNING = 10655
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 15102,10655
PERL_CR_SMOKER_CURRENT = Device-Gsm-1.55
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/stro/perl/perl5133/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 20 24 25 29 44 46 1000
$EGID = 1000 20 24 25 29 44 46 1000
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.94_57
Cwd 3.31
ExtUtils::CBuilder 0.2703
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.5601
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.31
Module::Build 0.3607
Module::Signature n/a
Test::Harness 3.21
Test::More 0.94
YAML 0.71
YAML::Syck 1.10_04
version 0.82
--
Summary of my perl5 (revision 5 version 13 subversion 3) configuration:
Platform:
osname=linux, osvers=2.6.26-2-686, archname=i686-linux
uname='linux debian5 2.6.26-2-686 #1 smp mon jun 21 05:58:44 utc 2010 i686 gnulinux '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.3.2', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Jul 20 2010 15:30:39
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="10655"
PERL5_CPAN_IS_RUNNING="10655"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="15102,10655"
PERL_CR_SMOKER_CURRENT="Device-Gsm-1.55"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/stro/perl/perl5133/lib/site_perl/5.13.3/i686-linux
/home/stro/perl/perl5133/lib/site_perl/5.13.3
/home/stro/perl/perl5133/lib/5.13.3/i686-linux
/home/stro/perl/perl5133/lib/5.13.3
.